
6/7 energysistem.com
Microphone3.
Status indicator4.
Charging case5.
Charging port6.
Turning on/off and pairing the device
Open the Charging case (5) and take out both earbuds to switch on and pair your Earphones Urban 4 TWS. You can also
press and hold the Multifunction button (R) (2) and (L) (1) for 2 seconds. At this point, the light on each earbud flashes
and both earbuds pair automatically. This process usually takes 15 seconds. When the Status indicator (4) on an
earbud flashes green and red, you will be able to pair your Earphones Urban 4 TWS with your smartphone. You will
know both earbuds are successfully paired when you hear "left channel/ right channel* through each earbud
respectively.
Select Earphones Urban 4 TWS from the list of Bluetooth devices on your smartphone and press connect. If you
previously paired the earbuds with a device, they will synchronise with it automatically. The Status indicator (4) will be
off while your Earphones Urban 4 TWS are paired.
If you only hear sound coming out from one earbud, disconnect them from the smartphone. Put the earbuds back into
the Charging Case and tap 3 times each earbud to reset them (the earbuds flash green when the reset has been
performed correctly). Once you've done this, repeat the setup process. Make sure the connection between both earbuds
has been established successfully before pairing them with your smartphone.
To turn off your Earphones Urban 4 TWS, simply put them back into the Charging case (5). You can also press and hold
the Multifunction button (R) (2) and (L) (1) for 8 seconds. You will hear a sound when switching off the earphones.
When the battery level is below 10%, you will hear a sound to remind you to charge them.
The Status indicator (4) glows white while charging the earphones and turns off once the charging process has been
completed.
Charging the battery
When the battery level is below 10%, you will hear a sound to remind you to charge it. Simply put the earphones in the
charging case to start charging them. The Status indicator (4) glows red while charging the device and turns off once
the charging process has been completed.
To charge your charging case, plug the microUSB end of the provided cable into the Charging port (6), and the other
end into a USB charging device. The LED of the case glows while charging the case and turns off once the charging
process has been completed.
Important: We recommend not to leave your Earphones Urban 4 TWS unused for long periods of time with an empty
battery. We advise you to charge your earphones' battery at least once a month.
Battery life
Volume Medium (50%) High (75%)
7 hours 6 hours
Auto power off
In order to optimize battery life, your Earphones Urban 4 TWS turn off automatically after 5 minutes in search mode, if
not synchronized with any other device. If they're not playing music, they turn off after 30 minutes.
Device controls
Press the Multifunction button (R) (2) or (L) (1) twice to pause or resume playback. Press and hold the Multifunction
button (R) (2) for 2 seconds to switch to the next song. Press the Multifunction button (L) (1) to switch to the previous
track.
After a few minutes without pressing the touch buttons, the earphones go into energy save mode. Touch the device
once to disable this mode before pressing the play/pause buttons.