
7/8 energysistem.com
your smartphone or Bluetooth music player and press ?connect?. Both devices will be connected immediately and
without codes. You will hear a confirmation sound when the devices are paired. At this point, the LED status indicator
(5) flashes blue.
If you previously paired the earbuds with a device, there is no need to repeat the pairing process again. Just enable
Bluetooth on your music player and switch on your Earphones Sport 5 True Wireless. They will sync with it
automatically.
Playback control
Play/Pause
Press the Right multifunction button (Play/Pause/Calls) (1) or the Left multifunction button (Play/Pause/Calls) (2) twice to
start playback or pause the music.
If you prefer, you can use the proximity sensor of your Earphones Sport 5 True Wireless. Remove one or both earbuds
from your ears to pause the music and/or wear them to resume playback.
Volume +/Volume -
Press the Right multifunction button (Volume +/Volume -/Next/Back) (3) or Left multifunction button (Volume +/Volume
-/Next/Back) (4) to turn up or down the volume.
Skipping to the next or previous track
Press and hold the Right multifunction button (Volume +/Volume -/Next/Back) (3) or Left multifunction button (Volume
+/Volume -/Next/Back) (4) for 2 seconds to skip to the next or previous track during music playback.
Call control
Once the Earphones Sport 5 True Wireless and your smartphone are synchronized, you can control calls from the
earphones.
Answering/Ending a call
To answer an incoming call, press the Right multifunction button (Play/Pause/Calls) (1) or Left multifunction button
(Play/Pause/Control) (2) twice. Press the same button twice to hang up.
Using the Voice Assistant feature
You can interact with your smartphone voice assistant using your Earphones Sport 5 True Wireless. To do so, press the
Right multifunction button (Play/Pause/Calls) (1) or Left multifunction button (Play/Pause/Calls) (2) three times in a row.
You can give the voice command 2-3 seconds after hearing the confirmation sound.
Charging the battery
Earphones
When the battery level of your Earphones Sport 5 True Wireless is below 10%, you will hear a low battery warning
sound. To charge the earphones? battery, put the earbuds back in the charging case. The earphones? LED status
indicator (5) lights up red and switches off once the charging process is complete.
Charging case
When the battery level of the charging case is below 10%, the first LED of the Charging indicator (charging case) (6)
starts flashing. Plug the USB Type-C end of the provided cable into the USB Type-C charging port (7), and the other end
into a 5 V USB charging device. The LEDs of the Charging indicator (charging case) (6) light up as the battery charges.
Once the charging process is complete, all LEDs will glow.
Important: We recommend not to leave neither your Earphones Sport 5 True Wireless nor your charging case unused
for long periods of time with an empty battery. We advise charging the battery at least once a month.
Restoring factory settings
To restore the factory settings or reset the device, follow the steps below: