
6/8 energysistem.com
Charging the battery
When the battery level is below 10%, the Status indicator (6) flashes red. You will also hear a sound to remind you to
charge the battery.
The Status indicator (6) glows red while charging the device and turns blue once the charging process has been
completed. Plug the microUSB end of the USB cable provided to your headphones' Charging port (7) and the other USB
end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the
battery. The charging time is approximately 3 hours.
Battery life
Volume Low (25%) Medium (50%) High (75%) Maximum (100%)
15 hours 13 hours 12.5 hours 12 hours
Important considerations:
Do not store or leave your device unused or completely discharged for a long period of time.
Bluetooth pairing
Once your Headphones BT Urban 3 are off, press and hold the Multifunction button (1) for approximately 4 seconds,
until the Status indicator (6) starts flashing red and blue. At this point, your headphones and your Bluetooth device can
be paired. Once "Headphones BT Urban 3" appears on your source devide screen, press "connect". You will hear a
sound to confirm that both devices have been paired correctly.
If you previously paired your Headphones BT Urban 3 with a source device, they will synchronize with it automatically. If
you want to pair them again, press the Multifunction button (1) twice. You will hear a confirmation sound and the lights
will flash red and blue. At this point, your device can be paired once again.
Auto power off
Your Headphones BT Urban 3 Bluetooth will automatically turn off in the following situations:
After 5 minutes in search mode, if they are not synchronized with another device.
After 30 minutes, if they are synchronized and music is paused.
Wireless playback control
Once your Headphones BT Urban 3 are syncronized, you will be able to control basic playback functions such as turning
up and down the volume and switching to the next or previous song directly from your headphones.
Press Volume + (5) or Volume - (3) to turn the volume up or down. You will hear a sound when reaching the maximum
and minimum volume levels.
Press Next (4) to switch to the next song. You can also press and hold Back (2) to go back to the previous song.
Press the Multifunction button (1) once to pause or resume playback.
If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to
control music playback and not the headphones.
Call control
Once your Headphones BT Urban 3 and smartphone are synchronized, you will be able to answer calls thanks to the
headphones' built-in Microphone (9).
Press the Multifunction button (1) to answer an incoming call. If you are listening to music when you receive a call,
playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to
reject an incoming call.
Press the Multifunction button (1) once again to end a call. Playback will resume from the point when the music
stopped.