
6/10 energysistem.com
Playback control
Select a playback mode and you will be able to control all playback functions from your Speaker FS600.
Press Play/Pause (3) to play or pause a song.
Press Volume - (5) or Volume + (4) to adjust the volume level according to your preferences.
Press Back (7) or Next (6) to skip to the previous or next song.
Important: If you are using the AUX input, you will have to control playback from the connected music player.
Bluetooth (BT)
To pair your speaker with a Bluetooth device, press Playback mode (2) until Bluetooth mode is enabled. The Bluetooth
symbol (bt) will flash on the Display (8).
At this point, access the Bluetooth settings on the device and search for Energy Sistem Speaker FS600 among the
detected devices. Select it to establish the connection. The devices will be connected immediately. You will hear a
sound confirming both devices are correctly paired. At this point, the Bluetooth symbol (bt) is displayed permanently on
the display.
Your Speaker FS600 will automatically pair with your source device when you turn the speaker on again, provided that
Bluetooth is enabled on the source device.
Press and hold Playback mode (2) for 2 seconds to disconnect the current device and pair the Speaker FS600 with a
new one. You will hear a sound when both devices disconnect and the Bluetooth symbol (bt) will flash on the Display
(8).
True Wireless Stereo (TWS)
This technology allows you to wirelessly connect a second Speaker FS600 within a maximum distance range of 20
metres to increase power and create a stereo system with separate left and right channels.
To do so, pair one speaker with your smartphone via Bluetooth first. Once you've done this, switch on the second
speaker and enable Bluetooth mode.
Press and hold Play/Pause (3) for 2 seconds on the speaker connected to the smartphone. At this point, the Bluetooth
symbol (bt) flashes quickly on the display. A few seconds later you will hear a sound to confirm both speakers have
been successfully synchronised.
You will hear the music through both speakers at the same time. A speaker will be assigned the left channel (L) and the
other one the right channel (R).
The next time you turn on both speakers, they will pair with one another automatically.
To disable the True Wireless Stereo function, press and hold Play/Pause (3) for two seconds on any of your Speaker
FS600. You will hear a confirmation sound when both units disconnect.
Skip to the next/previous track and adjust the volume from any speaker while TWS mode is enabled. If you turn up the
volume on any of the speakers, you will be turning up the volume of both of them at the same time.
Important: This is only possible if Bluetooth mode is enabled. In all other playback modes (USB, SD or AUX-in) a TWS
connection is not possible.
Removable USB sticks/SD cards
Play .mp3 and .wav files from your USB sticks or SD cards (up to 128 GB). Plug the USB stick into the USB playback port