ENERMAX LiqTech TR4 240 User manual

User’s Manual
TR4
LIQTECH
OC
Incredible 500W+ TDP

- 1 -
Please read this limited warranty carefully. Warranty is subject to void under following criteria:
1. The serial number label or warranty seal is defaced, modified, or removed.
2. Taking apart of the product and/or modification of any component or cable without
ENERMAX’s written authorization.
3. Ignoring connector’s faulty-insertion-prevention design by attaching a connector to a
device under incorrect orientation.
4. Damage caused by natural phenomena or uncontrollable forces, such as lightning,
flooding, fire, earthquake, or misuse, abuse, negligence, accident, wear and tear,
mishandling, misapplication.
This ENERMAX Technology Corporation product is warranted to be free from defects in
material and workmanship for a period of two (2) years from the date of purchase.
ENERMAX Technology Corporation agrees to repair or replace the product, at its own option
and at no charge, if, during the warranty period, it is returned to nearest ENERMAX
Technology Corporation subsidiary/agent with all shipping charges prepaid and if inspection
reveals that the product is defective. Please present the proof of purchase for requesting
RMA. Charges for removing or installing the product are excluded under the terms of this
warranty agreement. This warranty shall not apply to any product, which has been subject to
connection to a faulty power source, alteration, negligence, or accident, or to any product,
which has been installed other than in accordance with these instructions. In no event shall
ENERMAX Technology Corporation, or its subsidiaries, or agents be liable for damages for a
breach of warranty in an amount exceeding the purchase price of this product.
If you are uncertain whether or not your ENERMAX liquid cooler is defective, please contact
your dealer/reseller for support!
Web Site: http://www.enermax.com
E-mail: [email protected]
ENERMAX Technology Corporation, 15F-2, No. 888, Jing-Guo Road, Taoyuan City (330),
Taiwan (R.O.C.), Tel. [phone], Fax. [phone]
©2017 ENERMAX Technology Corporation. All rights reserved. Specifications are subject to
change without prior notice. Actual product and accessories may differ from illustrations.
Omissions and printing errors excepted. Content of delivery might differ in different countries
or areas. Some trademarks may be claimed as the property of others. Reproduction in any
manner without the written permission of ENERMAX is strictly forbidden.
Limited Warranty

- 2 -
Warranty & Support informaon For Australia
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entled to a replacement or refund for a major failure and for compensaon for any
other reasonably foreseeable loss or damage.
You are also entled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major falure. Please read the above limited
warranty. This warranty is valid only for the ENERMAX products distributed by authorized
dealer(s) in Australia.
Please contact ENERMAX for warranty and support informaon.
ENERMAX Technology Corporaon
15F-2, No. 888, Jing-Guo Road, Taoyuan City (330), Taiwan (R.O.C.)
Tel. [phone]
Web Site: hp://www.enermax.com
E-mail: [e-mail]
This ENERMAX liquid cooler is warranted to be free from defects in material and workmanship
for period stats in two(2) years. ENERMAX Technology Corporaon agrees to repair or replace
the product, at its own opon and at no charge, if during the warranty perod, it is returned to
nearest ENERMAX Technology Corporaon subsidiary/agent with all shipping charges prepaid
and bearing a return merchandize authorzaon (RMA) number, and if inspecon reveals that the
product is defecve. Charges for removing or installing the product are excluded under the
terms of this warranty agreement. This warranty shall not apply to any product, which has been
subject to connecon to a faulty power source, alteraon, negligence, or accident, or to any
product, which has been installed other than in accordance with these instrucons. In no event
shall ENERMAX Technology Corporaon, or its subsidiaries, or agents be liable for damages for a
breach of warranty in an amount exceeding the purchase price of this product!
Unless stated in the manual, the standard product warranty period is described in two(2) years.
If the goods is found defecve within the period of warranty from the date of purchase, please
contact ENERMAX or your purchased retail shop/agent.
Please note that proof of purchase would be required when request the RMA.

- 3 -
4 pin PWM
14 ~ 28 dBA
0.673 ~ 6.28 mm-H2O
23.81 ~ 102.17 CFM
40.45 ~ 173.59 m3/h
0.3A
12 V
1100 g
270 x 120 x 39
0.4A
12V
3000 rpm
100,000 hours
Ceramic nano PI bearing
Copper
ELC-LTTR240-TBP
Twister BearingBearing
120 x 120 x 25 mmDimension
Rated Current
Rated Voltage
500 - 2300 rpmSpeed
≧160,000 hoursMTBF
Air Flow
Fan
Static Pressure
Noise Level
Connector
AMD® TR4CompatibilityBracket
2 yearsWarranty
1395 gWeight (w/o fan)
400 mmLength
Polyamide (PA) rubber tubeMaterial
Tube
AluminumMaterial
402 x 120 x 28Dimension
Radiator
Rated Current
Rated Voltage
Motor Speed
MTBF
Bearing
Pump
MaterialCold Plate
ELC-LTTR360-TBPModel
4 pin PWM
14 ~ 28 dBA
0.673 ~ 6.28 mm-H
2
O
23.81 ~ 102.17 CFM
40.45 ~ 173.59 m
3
/h
0.3 A
12 V
1100 g
274 x 120 x 39 mm
0.4 A
12 V
3000 RPM
100,000 hours
Ceramic nano PI bearing
Copper
ELC-LTTR240-TBP
Twister BearingBearing
120 x 120 x 25 mmDimension
Rated Current
Rated Voltage
500 - 2300 RPMSpeed
≧160,000 hoursMTBF
Air Flow
Fan
Static Pressure
Noise Level
Connector
AMD
®
TR4 / SP3
CompatibilityBracket
2 yearsWarranty
1395 gWeight (w/o fan)
400 mmLength
Polyamide (PA) rubber tubeMaterial
Tube
AluminumMaterial
394 x 120 x 28 mmDimension
Radiator
Rated Current
Rated Voltage
Motor Speed
MTBF
Bearing
Pump
MaterialCold Plate
ELC-LTTR360-TBP
Specificaon

- 4 -
A Cooler x 1
B Fan x 2
C Case Screw x 8
G Thermal Grease x 1 H PWM Y cable x 1 I Molex adapter x 1
D Fan Screw x 8 E AMD TR4 / SP3
Screw x 4
F Spring Screw x 4
Part List (LIQTECH TR4 240)

- 5 -
A Cooler x 1
B Fan x 3
C Case Screw x 12
G Thermal Grease x 1 H PWM 3 to 1 cable x 1 I Molex adapter x 1
D Fan Screw x 12 E AMD TR4 / SP3
Screw x 4
F Spring Screw x 4
Part List (LIQTECH TR4 360)

- 6 -
Step 1
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
Aach the fan and the radiator to the chassis
Schrauben Sie den Lüer und den Radiator am Gehäuse fest.
Fixez le venlateur et le radiateur sur le châssis
Fissare la ventola e il radiatore al case
Fijar el venlador y el radiador a la caja
Zamontuj wentylator i radiator na obudowie komputerowej.
安裝風扇及散熱排於機殼
将风扇以及散热排安装在机箱上
ファンをラジエーターに設置してケースに取り付けて下さい。
팬과 방열기를 PC 케이스에 부착하십시오.
Pasang kipas dan radiator ke casing
Закрепите вентилятор и радиатор на корпусе.
IR .ﺪﻴﻳﺎﻤﻧ ﻞﺼﺘﻣ ﺲﻴﮐ ﻪﺑ ﺍﺭ ﺭﻮﺗﺎﻳﺩﺍﺭ ﻭﻦﻓ
AMD Installaon

- 7 -
Step 2
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
Tighten the AMD TR4 / SP3 screw to the motherboard
Schrauben Sie die Backplate mit den passenden AMD TR4 / SP3-Abstandshaltern am Mainboard fest.
Serrez la vis du support AMD TR4 / SP3 à la carte-mère
Fissare i montan per AMD TR4 / SP3 alla scheda madre
Fije los tornillos de pilar para AMD TR4 / SP3 a la placa madre
Przykręć płytę mocującą za pomocą przeznaczonych do plaormy AMD TR4 / SP3 nakrętek
dystansowych.
將AMD TR4 / SP3螺絲固定於主板上
将AMD TR4 / SP3螺丝固定在主板的相应位置上
AMD TR4 / SP3 の場合、 2011/2066 専用ネジを使用しバックプレートをマザーボードに
固定して下さい。
AMD TR4 / SP3 지지대를 마더보드에 고정하십시오.
Kencangkan AMD TR4 / SP3 sekrup ke motherboard
Затяните гайки «Intel AMD TR4 / SP3 » на материнской плате.
IR ﻪﺑ ﻁﻮﺑﺮﻣ ﭻﻴﭘ
AMD TR4 / SP3
ﺪﻴﻨﮐ ﻢﮑﺤﻣ ﺩﺮﺑﺭﺩﺎﻣ ﻪﺑ
AMD Installaon

- 8 -
Step 3
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
Apply the thermal grease evenly on the CPU surface
Verteilen Sie gleichmäßig eine dünne Schicht Wärmeleitpaste auf der CPU-Oberfläche.
Appliquez une couche uniforme de pâte thermique sur la surface du CPU
Applicare in modo uniforme la pasta termica sulla superficie della CPU
Aplicar de forma uniforme la pasta térmica en la superficie de la CPU
Nałóź równomiernie cienką warstwę pasty termoprzewodzącej na metalową osłonę
na procesorze.
將散熱膏均勻的塗抹於CPU表面
请在CPU表面均与涂抹散热硅脂
サーマルグリスをCPUの表面に均一になるよう薄く塗って下さい。
CPU 표면에 구리스를 평평히 펴 바르십시오.
Oleskan secara merata thermal pasta ke permukaan CPU
Нанесите термопасту равномерно на поверхность процессора.
IR .ﺪﻴﻳﺎﻤﻧ ﺶﺨﭘ ﻩﺪﻧﺯﺍﺩﺮﭘ ﺢﻄﺳ یﻭﺭ ﺮﺑ ﺍﺭ ﯽﺗﺭﺍﺮﺣ ﺮﻴﻤﺧ
AMD Installaon

- 9 -
Step 4
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
Remove the protect film from the cold-plate
Enernen Sie die Schutzfolie von der Kühlplae der Pumpe.
Rerez le film protecteur de la plaque-froide
Rimuovere la pellicola di protezione dalla piastra di raffreddamento
Quite la película de protección del bloque de refrigeración
Zdjąć folię ochronną z bloku wodnego.
取下水冷頭保護貼膜
使用时请将水冷头保护贴膜取下
コールドプレートの保護フィルムを外して下さい。
콜드 플레이트의 보호 필름을 제거하십시오.
Lepaskan pita pelindung dari plat pendingin
Пожалуйста, удалите защитную крышку с охлаждающей пластины
IR کﻼﺑ ﺢﻄﺳ ﺮﻳﺯ ﺯﺍ ﺍﺭ ﻆﻓﺎﺤﻣ ﻪﺤﻔﺻ-ﺪﻴﻨﮐ ﺍﺪﺟ ﭗﻤﭘ
AMD Installaon

- 10 -
Step 5
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
IR ﺩﻮﺷ ﺖﻔﺳ ﺎﻬﻧﺁ یﺎﺗﺭﺎﻬﭼ ﺮﻫ ﺎﺗ ﺪﻴﻨﮐ ﻢﮑﺤﻣ ﺍﺭ یﺮﻨﻓ یﺎﻬﭽﻴﭘ ﻭﺪﻴﻫﺩ ﺭﺍﺮﻗ ﻩﺪﻧﺯﺍﺩﺮﭘ یﻭﺭ ﺮﺑ ﺍﺭ ﭗﻤﭘ
Place the pump on the CPU and ghten the spring screws unl all four corners are secured
Platzieren Sie die Pumpe auf der CPU und drehen Sie die Federschrauben fest bis alle vier
Seiten fixiert sind.
Placez la pompe sur le CPU et serrez les vis à ressort jusqu'à ce que les quatre coins soient
bien fixés
Posizionare la pompa sulla CPU e fissare le vi fino a che tu e quaro gli angoli siano fissa.
Coloque la bomba en la CPU y apriete los tornillos hasta que las cuatro esquinas estén fijadas.
Umieść pompę na procesorze i przykręć wszystkie cztery srubki sprężyste.
將水泵至於 CPU 上並鎖緊四邊彈簧螺絲
将水泵置于
CPU 上并确认四边的弹簧螺丝拧紧
専用ネジを使用して水冷ポンプをCPUの上に固定して下さい。
CPU 에 펌프를 놓고 펌프의 네 코너가 단단히 고정 될 때까지 스프링 나사를
고정하십시오.
Tempatkan pompa pada CPU dan kencangkan keempat sekrup sampai keempat sudut aman
Установите насос на процессоре и затяните все 4 гайки.
AMD Installaon

- 11 -
Step 6 Pump
4 pin
Pump
3 pin
or
IR ﺪﻴﻳﺎﻤﻧ ﻞﺼﺘﻣ ﺩﺮﺑ ﺭﺩﺎﻣ ﻪﺑ ﺍﺭ ﭗﻤﭘ ﻕﺮﺑ ﺶﻴﻓ
PWMﺭﺎﮐ یﺍﺮﺑ ﺐﺳﺎﻨﻣ ژﺎﺘﻟﻭ ﺩﺮﺑﺭﺩﺎﻣ یﻭﺭ ﻕﺮﺑ ﺎﻳ ﻩﺪﻧﺯﺍﺩﺮﭘ ﻦﻓ ﻕﺮﺑ ﺖﮐﻮﺳ ﻪﮐ ﺪﻳﺩﺍﺩ ﺺﻴﺨﺸﺗ ﺮﮔﺍ : ﻪﺟﻮﺗ
ﻩﺩﺎﻔﺘﺳﺍ ﺭﻭﺎﭘ ﻪﺑ ﻢﻴﻘﺘﺴﻣ ﻝﺎﺼﺗﺍ یﺍﺮﺑ ﺩﺭﺍﺩ ﺭﺍﺮﻗ ﻪﺒﻌﺟ ﺭﺩ ﻪﮐ ﺭﻭﺎﭘ ﻦﻴﭘﺭﺎﻬﭼ ﻞﻳﺪﺒﺗ ﺯﺍ "ﺎﻔﻄﻟ ,ﺪﻨﮑﻴﻤﻧ ﻦﻴﻣﺎﺗ ﺍﺭ ﭗﻤﭘ
.ﺪﻴﻨﮐ
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
Connect the pump power connector to the motherboard.
Noce: If you recognize that your mainboard's CPU fan or PWM sockets do not provide enough voltage to power the pump, please use the
included 4-pin Molex adaptor and connect the pump directly to your PSU.
Schließen Sie den Stromstecker der Pumpe am Mainboard an.
Hinweis: Wenn Sie bemerken, dass die CPU-Fan- und PWM-Sockel Ihres Mainboards für den Betrieb der Pumpe eine zu geringe Spannung
erreichen, schließen Sie diese bie über den mitgelieferten 4-Pin-Molex-Adapter direkt an das Netzteil an.
Branchez le connecteur d'alimentaon de la pompe à la carte-mère.
Remarque : Si vous constatez que le connecteur du venlateur CPU ou le PWM de la carte mère ne fournissent pas suffisamment
de courant à la pompe, nous vous recommandons d'uliser le câble adaptateur 4 broches Molex inclus que vous connecterez à
l'alimentaon.
Collegare il conneore di alimentazione della pompa alla scheda madre.
Avviso: se notate che il socket PWM o il socket per la ventola della CPU non forniscono un tensione sufficiente per alimentare la pompa, si
prega di ulizzare l’adaatore Molex a 4 pin in dotazione e collegare la pompa direamente alla PSU.
Conecte el cable de la bomba a la placa madre.
Aviso: Si se nota que el enchufe PWM o el enchufe para el venlador de la CPU no proporcionan suficiente voltaje para alimentar la bomba,
se ruega ulizar el adaptador Molex de 4 pallas incluido y conectar la bomba directamente a la fuente de alimentación.
Podłącz wtyczkę do zasilania pompy do plyty głównej.
Uwaga: Jeśli gniazda płyty głównej „CPU Fan” oraz PWM nie zapewniają wystarczającego napięcia do zasilania pompy, proszę podłączyć
pompę bezpośrednio do zasilacza za pomocą 4-pinowego adaptera Molex.
連接水泵電源於主板
注意:為確保水泵維持長時間全速運轉，若您主機板上的CPU風扇或PWM插座未能提供足夠電壓驅動水泵時，建議您使用內附4pin
轉接線連接至電源供應器，以達到產品最佳效能
请将水泵电源与主板相应供电口连接
注意：为确保水泵能长时间全速运转，若您主板上的CPU风扇或者PWM接口不能提供足够电压带动水泵，建议使用内附4pin转接线
连接至电源，以达到产品最佳效能。
水冷ポンプのコネクターをマザーボードに接続して下さい。
注意：ご使用のマザーボードのCPUファンコネクターまたはPWMファンコネクターがポンプに十分な電圧を供給しない場合は、付属の
4-pin Molex変換アダプターをご使用いただき、電源ユニットに直接ポンプを接続してください。
펌프 전원 커넥터를 마더보드에 연결하십시오.
주의사항 : 메인보드 CPU Fan 또는 PWM 소켓에 연결 했을 시 충분한 전압을 펌프로 제공을 하지 못하면,별도로 제공한
4핀 Molex 케이블을 이용하여 파워서플라이에 직접연결 하십시요.
Hubungkan konektor daya pompa ke motherboard.
Catatan : jika anda menyadari socket power cpu fan atau pwm motherboard anda, dak bisa memberikan daya yang cukup untuk pompa
watercooling, silahkan menggunakan 4pin molex adaptor dan sambungkan langsung ke power PSU.
Пожалуйста, подключите разъем питания насоса к материнской плате.
Примечание: Если Вы заметили, что разъём материнской платы выдаёт низкое напряжение для работы насоса, пожалуйста,
подключите насос с помощью прилагаемого 4-контактного Мolex адаптера непосредственно к блоку питания.
AMD Installaon

- 12 -
Step 7
EN
DE
FR
IT
ES
PL
TW
CN
ID
JP
KR
RU
IR .ﺪﻴﻳﺎﻤﻧ ﻞﺼﺘﻣ ﺩﺮﺑﺭﺩﺎﻣ ﻪﺑ ﺍﺭ ﻦﻓ ﺶﻴﻓ
Connect the fan connector to the motherboard
Schließen Sie den 4-Pin-PWM-Stecker des Lüers am Mainboard an.
Branchez le connecteur du venlateur à la carte-mère
Collegare il conneore della ventola alla scheda madre
Conecte el conector del venlador a la placa madre
Podłącz wtyczkę 4-pin PWM wentylatora do płyty głównej.
連接風扇電源於主板
请将风扇电源与主板上的相应供电口连接
ファンコネクターをマザーボードに接続して下さい。
팬 커넥터를 마더보드에 연결하십시오.
Hubungkan konektor kipas ke motherboard
Пожалуйста, подключите разъем вентилятора к материнской плате.
PWM Y cable
4 pin
1stfan 2stfan
AMD Installaon

- 13 -

©2017 ENERMAX TECHNOLOGY CORPORATION. All right reserved. Specifications are subject
to change without prior notice. Some trademarks may be claimed as the property of others.
Aug. 2017