1. Power On / Off
Turn on/off the power by switch the buon to ON / OFF posion. When
turn on the power, a short welcome message (You enter the Bluetooth/ play
mode) will be played.
**Note:
Before using your EAS01, please fully charge the baery for beer performance.
2. Bluetooth Pairing
Enable your smart phone/tablet Bluetooth, search “EAS01” device, and add
this device. If paring is successful, a voice message of “Connecon is ok” will
be played, and the Bluetooth signal will change from flashing to light on.
**Note:
EAS01 can memorize up to 8 Bluetooth connected devices, and it can be
automacally connected to the nearest one.
3. NFC (Near Field Communicaon Technology) pairing
To pair the EAS01 via NFC, please enable your phone/tablet Bluetooch and
NFC, and tab your device with the NFC logo on EAS01. Your device should
detect EAS01 in seconds, and please add the EAS01 to complete the pairing.
4. AUX-in Input
EAS01 also accept the 3.5mm jack AUX-in for audio input. Please use the
provided 3.5mm audio cable to connect audio devices to EAS01 AUX-in port
, then it’s done.
**Note:
under AUX-in mode, press is for mute.
5. TF Card Play
Insert TF card to EAS01 TF (Micro SD) card slot , EAS01 will automacally
play music from TF card.
Funcon
7
9
4
2
5
- 7 -
EAS01