enphase IQ 7 User manual

INSTALLATION AND OPERATION MANUAL
July 08, 2020 141-00044-02
Enphase IQ 7, IQ 7+, IQ 7X, and
IQ 7A Microinverters

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
2
Corporate Headquarters Contact Information
Enphase Energy Inc.
https://enphase.com/en-us/support/global-contact
Other Information
Product information is subject to change without notice. All trademarks are recognized as the property
of their respective owners.
User documentation is updated frequently; Check the Enphase website (enphase.com/support) for
the latest information.
To ensure optimal reliability and to meet warranty requirements, the Enphase Microinverter must be
installed according to the instructions in this manual. For warranty text refer to enphase.com/warranty.
For Enphase patent information refer to enphase.com/company/patents/.
© 2020 Enphase Energy Inc. All rights reserved.
Audience
This manual is intended for use by professional installation and maintenance personnel.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
3
Table of Contents
Important Safety Information ....................................................................................................................................4
Read this First............................................................................................................................................4
Product Labels ...........................................................................................................................................4
Safety and Advisory Symbols.....................................................................................................................4
IQ 7 Series Microinverter Safety Instructions.............................................................................................4
The Enphase IQ System...........................................................................................................................................7
How the Enphase IQ Series Micros Work..................................................................................................8
System Monitoring.................................................................................................................................8
Optimal Reliability..................................................................................................................................8
Ease of Design.......................................................................................................................................8
Planning for Microinverter Installation.......................................................................................................................9
Compatibility...............................................................................................................................................9
Grounding Considerations..........................................................................................................................9
Branch Circuit Capacity............................................................................................................................10
Utility Service Requirements....................................................................................................................10
Wire Lengths and Voltage Rise................................................................................................................10
Lightning and Surge Suppression............................................................................................................10
Parts and Tools Required.......................................................................................................................................11
Enphase Equipment.............................................................................................................................11
Other Items..........................................................................................................................................11
Enphase Microinverter Installation..........................................................................................................................12
Step 1: Position the Enphase Q Cable.....................................................................................................13
Step 2: Position the Junction Box.............................................................................................................13
Step 3: Mount the Microinverters .............................................................................................................14
Step 4: Create an Installation Map...........................................................................................................15
Step 5: Manage the Cabling.....................................................................................................................16
Step 6: Connect the Microinverters..........................................................................................................16
Step 7: Terminate the Unused End of the Cable......................................................................................17
Step 8: Complete Installation of the Junction Box....................................................................................18
Step 9: Connect the PV Modules.............................................................................................................18
Step 10: Energize the System..................................................................................................................19
Set Up and Activate Monitoring................................................................................................................19
Troubleshooting......................................................................................................................................................20
Status LED Indications and Error Reporting ............................................................................................20
LED Operation.....................................................................................................................................20
DC Resistance Low –Power Off Condition.........................................................................................20
Other Faults.........................................................................................................................................21
Troubleshoot an Inoperable Microinverter................................................................................................22
Disconnect a Microinverter.......................................................................................................................23
Install a Replacement Microinverter.........................................................................................................24
Ordering Replacement Parts....................................................................................................................25
Enphase Q Cable Planning and Ordering................................................................................................26
Connector Spacing Options.................................................................................................................26
Cabling Options ...................................................................................................................................26
Enphase Q Cable Accessories............................................................................................................26
Technical Data........................................................................................................................................................27
Technical Considerations.........................................................................................................................27
Compliance Data......................................................................................................................................27
Anti-Islanding.......................................................................................................................................27
PQ Capability Curve ............................................................................................................................27
Specifications...........................................................................................................................................28
IQ7-60-2-INT Microinverter Specifications...........................................................................................28
IQ7PLUS-72-2-INT Microinverter Specifications .................................................................................30
IQ7A-72-2-INT Microinverter Specifications ........................................................................................32
IQ7X-96-2-INT Microinverter Specifications ........................................................................................34
Q Cable Specifications.........................................................................................................................36
Enphase Installation Map.........................................................................................................................37
Sample Wiring Diagram –single-phase:..................................................................................................38
Sample Wiring Diagram –multiphase:.....................................................................................................39

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
4
Important Safety Information
Read this First
This manual contains important instructions for use during installation and maintenance of the IQ 7™Series
Microinverters.
IMPORTANT: Enphase IQ Series Microinverters require the Q Cable and are not compatible with previous
Enphase cabling. An Envoy-S is required to monitor performance of the IQ Microinverters. The Q Accessories
work only with Enphase IQ Series Microinverters.
Product Labels
The following symbols appear on the product label and are described here:
WARNING: Hot surface.
DANGER: Refer to safety instructions.
DANGER: Risk of electrical shock.
Refer to manual
Double-insulated
Safety and Advisory Symbols
To reduce the risk of electric shock, and to ensure the safe installation and operation of the EnphaseIQ System,
the following safety symbols appear throughout this document to indicate dangerous conditions and important
safety instructions.
DANGER:
This indicates a hazardous situation, which if not avoided, will result in death or serious injury.
WARNING:
This indicates a situation where failure to follow instructions may be a safety hazard or cause
equipment malfunction. Use extreme caution and follow instructions carefully.
WARNING:
This indicates a situation where failure to follow instructions may result in burn injury.
NOTE:
This indicates information that is very important for optimal system operation. Follow instructions
closely.
IQ 7 Series Microinverter Safety Instructions
General Safety
DANGER: Risk of
electric shock.
Risk of fire.
Only use electrical system components approved for wet locations.
Only qualified personnel should install, troubleshoot, or replace Enphase Microinverters or Enphase
Q Cable and Accessories.
Ensure that all AC and DC wiring is correct and that none of the AC or DC wires are pinched,
shorted or damaged. Ensure that all AC junction boxes are properly closed.
Do not exceed the maximum number of microinverters in an AC branch circuit as listed in the
manual. You must protect each microinverter AC branch circuit with a 20 A maximum breaker or
fuse as appropriate.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
5
DANGER: Risk of
electric shock.
Do not use Enphase equipment in a manner not specified by the manufacturer. Doing so may cause
death or injury to persons, or damage to equipment.
Be aware that installation of this equipment includes risk of electric shock.
The DC conductors of this photovoltaic system are ungrounded and may be energized.
Always de-energize the AC branch circuit before servicing. While connectors are rated for
disconnect under load, Enphase does not recommend disconnecting the DC connectors under load.
WARNINGS:
Before installing or using the Enphase Microinverter, read all instructions and cautionary markings
in the technical description, on the Enphase equipment and on the photovoltaic (PV) equipment.
Do not connect Enphase Microinverters to the grid or energize the AC circuit(s) until you have
completed all of the installation procedures and have received approval from the electrical utility.
When the PV array is exposed to light, DC voltage is supplied to the power conversion equipment
(PCE).
Risk of equipment damage. Enphase male and female connectors must only be mated with the
matching male/female connector.
NOTES:
To ensure optimal reliability and to meet warranty requirements, install the Enphase equipment
according to the instructions in this manual.
The AC and DC connectors on the cabling are rated as a disconnect only when used with an
Enphase Microinverter.
Protection against lightning and resulting voltage surge must be in accordance with local standards.
Perform all electrical installations in accordance with all applicable local electrical codes.
Microinverter Safety
WARNING: Risk of
skin burn.
The chassis of the Enphase Microinverter is the heat sink. Under normal operating conditions, the
temperature could be 20° C above ambient, but under extreme conditions the microinverter can
reach a temperature of 90° C. To reduce risk of burns, use caution when working with
microinverters.
DANGER: Risk of
fire.
The DC conductors of the PV module must be labeled “PV Wire” or “PV Cable” when paired with
the Enphase Microinverter.
DANGER: Risk of
electric shock. Risk
of fire.
Only qualified personnel may connect the Enphase Microinverter to the utility grid.
Do not attempt to repair the Enphase Microinverter; it contains no user-serviceable parts. If it fails,
contact Enphase customer service to obtain a return merchandise authorization (RMA) number and
start the replacement process. Tampering with or opening the Enphase Microinverter will void the
warranty.
WARNING: Risk of
equipment damage
Install the microinverter under the PV module to avoid direct exposure to rain, UV, and other
harmful weather events. Always install the microinverter bracket side up. Do not mount the
microinverter upside down. Do not expose the AC or DC connectors (on the Enphase Q Cable, PV
module, or the microinverter) to rain or condensation before the connectors are mated.
The maximum open circuit voltage of the PV module must not exceed the specified maximum input
DC voltage of the Enphase Microinverter.
WARNING: Risk of
equipment damage
You must match the DC operating voltage range of the PV module with the allowable input voltage
range of the Enphase Microinverter.
The Enphase Microinverter is not protected from damage due to moisture trapped in cabling
systems. Never mate microinverters to cables that have been left disconnected and exposed to wet
conditions. This voids the Enphase warranty.
The Enphase Microinverter functions only with a standard, compatible PV module with appropriate
fill-factor, voltage, and current ratings. Unsupported devices include smart PV modules, fuel cells,
wind or water turbines, DC generators, and non-Enphase batteries, etc. These devices do not
behave like standard PV modules, so operation and compliance are not guaranteed. These devices
may also damage the Enphase Microinverter by exceeding its electrical rating, making the system
potentially unsafe.
NOTES:
The Enphase Microinverter has field-adjustable voltage and frequency trip points that may need to
be set, depending upon local requirements. Only an authorized installer with the permission and
following requirements of the local electrical authorities should make adjustments.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
6
Enphase Q Cable Safety
DANGER: Risk of
electric shock.
Do not install the Enphase Q Cable terminator while power is connected.
WARNING: Risk
of electric shock.
Risk of fire.
When stripping the sheath from the Q Cable, make sure the conductors are not damaged. If the
exposed wires are damaged, the system may not function properly.
Do not leave AC connectors on the Q Cable uncovered for an extended period. You must cover any
unused connector with a sealing cap.
Make sure protective sealing caps have been installed on all unused AC connectors. Unused AC
connectors are live when the system is energized.
WARNING:
Use the terminator only once. If you open the terminator following installation, the latching
mechanism is destroyed. If the latching mechanism is defective, do not use the terminator. Do not
circumvent or manipulate the latching mechanism.
When installing the Enphase Q Cable, secure any loose cable to minimize tripping hazard.
NOTES:
When looping the Enphase Q Cable, do not form loops smaller than 4.75”(12 cm) in diameter.
Provide support for the Enphase Q-Cable every 1.8m (6 feet).
If you need to remove a sealing cap, you must use the Enphase disconnect tool.
When installing the Enphase Q Cable and accessories, adhere to the following:
•Do not expose the terminator cap or cable connections to directed, pressurized liquid (water
jets, etc.).
•Do not expose the terminator or cable to continuous immersion.
•Do not expose the terminator cap or cable connections to continuous tension (e.g., tension due
to pulling or bending the cable near the connection).
•Use only the connectors provided.
•Do not allow contamination or debris in the connectors.
•Use the terminator cap and cable connections only when all parts are present and intact.
•Do not install or use in potentially explosive environments.
•Do not allow the terminator to come into contact with open flame.
•Fit the terminator cap using only the prescribed tools and in the prescribed manner.
•Use the terminator to seal the conductor end of the Enphase Q Cable; no other method is
allowed.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
7
The Enphase IQ System
The Enphase IQ System includes:
•EnphaseIQ 7, IQ 7+, IQ 7X and IQ 7A Microinverters. The smart grid ready IQ Series
Microinverters convert the DC output of the PV module into grid-compliant AC power.
•Enphase Envoy-S™. Use model ENV-S-WM-230 for multi-phase installations or ENV-S-WB-
230-F, -G, or -I for single-phase installations. The Enphase Envoy-S is a communication
device that provides network access to the PV array. The Envoy-S collects production and
performance data from the Enphase IQ Microinverters over on-site AC power lines and
transmits the data to Enlighten through an Internet or cellular connection. The Envoy-S is
capable of monitoring up to 600 Enphase IQ Microinverters and up to 39 Enphase IQ
Batteries. For details, refer to Enphase Envoy-S Installation and Operations Manual.
•Enphase Enlighten™web-based monitoring and management software. Installers can use
Enlighten Manager to view detailed performance data, manage multiple PV systems, and
remotely resolve issues that might impact system performance. Find out more at
enphase.com/enlighten.
•Enphase Installer Toolkit™mobile app for iOS and Android devices. It allows installers to
configure the system while onsite, eliminating the need for a laptop and improving installation
efficiency. You can use the app to:
oConnect to the Envoy-S over a wireless network for faster system setup and
verification
oView and email a summary report that confirms a successful installation
oScan device serial numbers and sync system information with Enlighten
monitoring software
•Enphase Battery(ies) offer energy storage solutions.
•Enphase Field Wireable connectors (Q-CONN-R-10F and Q-CONN-R-10M) make
connections from any Q Cable, or open Field Wireable connector.
This manual describes the safe installation and operation of the Enphase Microinverter.
NOTE: To ensure optimal reliability and to meet warranty requirements, the Enphase
Microinverter must be installed according to the instructions in this manual.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
8
How the Enphase IQ Series Micros Work
The Enphase Microinverter maximizes energy production by using a sophisticated Maximum Power
Point Tracking (MPPT) algorithm. Each Enphase Microinverter individually connects to one PV
module in your array. This configuration enables an individual MPPT to control each PV module,
ensuring that maximum power available from each PV module is exported to the utility grid regardless
of the performance of the other PV modules in the array. While an individual PV module in the array
may be affected by shading, soiling, orientation, or PV module mismatch, each Enphase Microinverter
ensures top performance for its associated PV module.
System Monitoring
Once you install the Enphase Envoy-S and provide an internet connection through a broadband
router or modem, the Enphase IQ Microinverters automatically begin reporting to Enlighten. Enlighten
presents current and historical system performance trends and informs you of PV system status.
Optimal Reliability
Microinverter systems are inherently more reliable than traditional inverters. The distributed nature of
a microinverter system ensures that there is no single point of system failure in the PV system.
Enphase Microinverters are designed to operate at full power at ambient temperatures as high as 65
C (150F).
Ease of Design
PV systems using Enphase Microinverters are very simple to design and install. You will not need
string calculations or cumbersome traditional inverters. You can install individual PV modules in any
combination of PV module quantity, type, age and orientation. Each microinverter quickly mounts on
the PV racking, directly beneath each PV module. Low voltage DC wires connect from the PV module
directly to the co-located microinverter, eliminating the risk of personnel exposure to dangerously high
DC voltage.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
9
Planning for Microinverter Installation
•The Enphase IQ 7 Microinverter is compatible with 60-cell PV modules.
•The IQ 7+ and IQ 7A Microinverters support PV modules with 60 cells / 120-half-cells or 72
cells / 144-half-cells.
•The IQ 7X requires a 96-cell PV module.
All install quickly and easily. The microinverter housing is designed for outdoor installation and
complies with the IP67 environmental enclosure rating standard:
IP67 rating definition: Indoor or outdoor use primarily to provide a degree of protection
against hose-directed water, the entry of water during occasional temporary submersion at
a limited depth, and damage from external ice formation
The Enphase Q Cable is available in multiple connector spacing options for landscape and portrait
orientations to meet varying site requirements. For Enphase Q Cable ordering information, see
“Enphase Q Cable Planning and Ordering” on page 26.
Compatibility
The Enphase IQ Series Micros are electrically compatible with PV modules as listed in the following
table. For specifications, see “Technical Data”on page 27 of this manual. You can refer to the
Enphase Compatibility Calculator at: module-compatibility to verify PV module electrical compatibility.
To ensure mechanical compatibility, be sure to order the correct connector type for both
microinverter and PV module from your distributor.
WARNING: Risk of fire. The PV module DC conductors must be labeled "PV Wire" or "PV
Cable” to comply with NEC for Ungrounded PV Power Systems.
Microinverter model
Connector type
PV module cell count
IQ7-60-2-INT
MC-4 locking type
Pair only with 60-cell modules
IQ7PLUS-72-2-INT, IQ7A-72-2-INT
MC-4 locking type
Pair with 60 cell / 120-half-cell modules or 72
cell / 144-half-cell modules.
IQ7X-96-2-INT
MC-4 locking type
Pair only with 96-cell modules
NOTE: Some Enphase Microinverters will not begin exporting power until the Envoy is
installed and has detected all of the microinverters at the site. In addition, the grid profile
may need to be configured and the Envoy must have propagated these settings to the
microinverters. For instructions on this procedure, refer to the Envoy Installation and
Operation Manual at enphase.com/support.
Grounding Considerations
The IQ Series Micros do not require grounding electrode conductors (GEC) or equipment grounding
conductors (EGC). Your Authority Having Jurisdiction (AHJ) may require you to bond the mounting
bracket to the racking. If so, use earthing hardware or star washers. The microinverter itself has a
Class II double-insulated rating, which includes ground fault protection (GFP). To support GFP, use
only PV modules equipped with DC cables labeled PV Wire or PV Cable.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
10
Branch Circuit Capacity
Plan your AC branch circuits to meet the following limits* for maximum number of microinverters per
branch when protected with a 20-amp over-current protection device (OCPD). For most multiphase
installations, use a 3-pole 20A OCPD. If installing the IQ 7A, use a 3-pole 25A OCPD.
Maximum* IQ Microinverters per AC branch circuit
Microinverter model
IQ 7
IQ 7+
IQ 7X
IQ 7A
Single-phase
16
13
12
11
Multiphase
48
39
36
39 (25 A OCPD)
NOTE: *Limits may vary. Refer to local requirements to define the number of microinverters
per branch in your area
Utility Service Requirements
The Enphase Microinverters work with single-phase or three-phase service. Measure AC line voltage
at the electrical utility connection to confirm that it is within range:
Single-Phase Service
Three-Phase Service
L1 to N
207 to 253 VAC
L1 to L2 to L3
360 to 440 VAC
L1, L2, L3 to N
207 to 253 VAC (most models)
219 to 264 (IQ 7A models)
Wire Lengths and Voltage Rise
When planning the system, you must select the appropriate AC conductor size to minimize voltage
rise. Select the correct wire size based on the distance from the beginning of the microinverter AC
branch circuit to the breaker in the load center. Enphase recommends a voltage rise total of less than
2% for the sections from the microinverter AC branch circuit to the breaker in the load center.
Enphase provides guidance about choosing wire size and maximum conductor lengths in the Voltage
Rise Technical Brief at enphase.com/support. Refer to this brief for voltage rise values in Enphase Q
Cables and on how to calculate voltage rise in other wire sections of the system.
Standard guidelines for voltage rise on feeder and AC branch circuit conductors might not be
sufficient for microinverter AC branch circuits that contain the maximum allowable microinverters. This
is due to high inherent voltage rise on the AC branch circuit.
Best practice: Center-feed the branch circuit to minimize voltage rise in a fully-populated
branch. This practice greatly reduces the voltage rise as compared with an end-fed
branch. To center-feed a branch, divide the circuit into two sub-branch circuits protected
by a single OCPD.
Lightning and Surge Suppression
Enphase Microinverters have integral surge protection, greater than most traditional inverters.
However, if the surge has sufficient energy, the protection built into the microinverter can be
exceeded, and the equipment can be damaged. For this reason, Enphase recommends that you
protect your system with a lightning and/or surge suppression device. In addition to having some level
of surge suppression, it is also important to have insurance that protects against lightning and
electrical surges.
NOTE: Protection against lightning and resulting voltage surge must be in accordance
with local standards.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
11
Parts and Tools Required
In addition to the microinverters, PV modules, and racking, you will need the following:
Enphase Equipment
•Enphase Envoy-S gateway required to monitor solar production. For installation
information, refer to the Enphase Envoy-S Installation and Operations Manual.
•Enphase Installer Toolkit
Download the Enphase Installer Toolkit mobile app and open it to log in to your
Enlighten account. With this app, you can scan microinverter serial numbers and
connect to the Envoy-S to track system installation progress. To download, go to
enphase.com/toolkit or scan the QR code at right.
•Enphase Q Relay, single phase (Q-RELAY-1P-INT) or Enphase Q Relay, multiphase (Q-
RELAY-3P-INT)
•Tie wraps or Cable Clips (ET-CLIP-100)
•Enphase Sealing caps (Q-SEAL-10) for any unused drops on the Enphase Q Cable
(optional)
•Enphase Terminator (Q-TERM-R-10 for single phase or Q-TERM-3P-10 for multiphase)
One for each AC cable segment end; typically two needed per branch circuit.
•Enphase Disconnect Tool (Q-DISC-10)
•Enphase Q Cable:
Cable Model
Connector
Spacing
PV Module Orientation
Connector Count per
box
Single-phase
Q-25-10-240
Q-25-10-240-A*
1.3m
Portrait
240
Q-25-17-240
Q-25-17-240-A*
2.0m
Landscape (60- and 96- cell)
240
Q-25-20-200
Q-25-20-200-A*
2.3m
Landscape (72-cell)
200
Multiphase
Q-25-10-3P-200
1.3m
Portrait (all)
200
Q-25-17-3P-160
2.0m
Landscape (60- and 96-cell)
160
Q-25-20-3P-160
2.3m
Landscape (72-cell)
160
* Models with "-A" designation for use only in Australia and New Zealand.
•Raw Q Cable: (Q-25-RAW-300/ Q-25-RAW-300-A* for single-phase, Q-25-RAW-3P-300
for multiphase) Length 300 meters. Raw cable with no connectors. (optional)
Other Items
•Field Wireable Connectors (Q-CONN-R-10M and Q-CONN-R-10F): optional male and
female connectors (optional)
•Number 2 and 3 screwdrivers
•Wire cutters, voltmeter
•Torque wrench, sockets, wrenches for mounting hardware

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
12
Enphase Microinverter Installation
Installing the Enphase IQ Series Micros involves several key steps. Each step listed here is detailed
in the following pages.
Step 1: Position the Enphase Q Cable
Step 2: Position the Junction Box
Step 3: Mount the Microinverters
Step 4: Create an Installation Map
Step 5: Manage the Cabling
Step 6: Connect the Microinverters
Step 7: Terminate the Unused End of the Cable
Step 8: Complete Installation of the Junction Box
Step 9: Connect the PV Modules
Step 10: Energize the System
AC junction box
or isolator
Enphase
IQ Series
Micros
Tie wraps
or cable
clips
DC
connectors
AC
connector
Enphase Q
Cable
Terminator

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
13
Step 1: Position the Enphase Q Cable
A. Plan each cable segment to allow drop connectors on the Enphase Q Cable to align with
each PV module. Allow extra length for slack, cable turns, and any obstructions.
B. Mark the approximate centers of each PV module on the PV racking.
C. Lay out the cabling along the installed racking for the AC branch circuit.
D. Cut each segment of cable to meet your planned needs.
WARNING: When transitioning between rows, secure the cable to the rail to prevent cable
damage or connector damage. Do not count on connector to withstand tension.
Step 2: Position the Junction Box
A. Verify that AC voltage at the site is within range.
Single-Phase Service
Three-Phase Service
L1 to N
207 to 253 VAC
L1 to L2 to L3
360 to 440 VAC
L1, L2, L3 to N
207 to 253 VAC (most models)
219 to 264 (IQ 7A models)
B. Install a junction box at a suitable location on the racking.
C. Provide an AC connection from the junction box back to the electricity network using
equipment and practices as required by local jurisdictions.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
14
Step 3: Mount the Microinverters
A. If the Enphase DC bulkhead connectors are not already attached to the microinverters,
attach them now. Make sure they are fully seated.
B. Mount the microinverter bracket side up (as shown) and under the PV module,
away from rain and sun. Allow a minimum of 1.9 cm between the roof and the
microinverter. Also allow 1.3 cm between the back of the PV module and the top of the
microinverter.
WARNING: Install the microinverter under the PV module to avoid direct exposure to
rain, UV and other harmful weather events. Do not mount the microinverter upside
down.
WARNING: IQ7A installs are not recommended with bi-facial modules, and use of
such may impact the limited warranty.
C. Torque the microinverter fasteners as follows. Do not over torque.
•6 mm mounting hardware: 5 N m
•8 mm mounting hardware: 9 N m
•When using UL 2703 mounting hardware, use the manufacturer’s
recommended torque value
AC Connector
DC Connector

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
15
Step 4: Create an Installation Map
The Enphase Installation Map is a diagram of the physical location of each microinverter in your PV
installation. Copy or use the blank map on page 37 to record microinverter placement for the system
or provide your own layout if you require a larger or more intricate installation map.
Each Enphase Microinverter, Envoy, and Battery have a removable serial number label. Build the
installation map by peeling the serial number labels from the microinverter mounting plates and
placing the labels on the map. You will also place the Enphase Envoy-S and IQ Battery serial number
on the map after installation.
After you have created the installation map, use the Enphase Installer Toolkit mobile app to record
serial numbers and configure the system.
For Installer Toolkit details refer to “Detect the Microinverters” in the help topics of the Installer Toolkit
app.
A. Peel the removable serial number label from each microinverter and affix it to the
respective location on the paper installation map.
B. Peel the label from the Envoy-S and any Enphase Battery, if installed) and affix it to the
installation map.
C. Always keep a copy of the installation map for your records.
Affix serial number
labels

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
16
Step 5: Manage the Cabling
A. Use cable clips or tie wraps to attach the cable to the racking. Leave no more than 1.8 m
between cable clips or tie wraps.
Cable clip
B. Dress any excess cabling in loops so that it does not contact the roof. Do not form loops
smaller than 12 cm in diameter.
WARNING: Tripping Hazard. Loose cables can become a tripping hazard. Dress the
Enphase Q Cable to minimize this potential.
Step 6: Connect the Microinverters
A. Connect the microinverter. Listen for a click as the connectors engage.
B. Cover any unused connector with Enphase Sealing Caps. Listen for a click as the
connectors engage.
WARNING: Risk of electric shock. Risk of fire. Install sealing caps on all unused AC
connectors as these connectors become live when the system is energized. Sealing
caps are required for protection against moisture ingress.
NOTE: If you need to remove a sealing cap, you must use the Enphase Disconnect
Tool. See “Disconnect a Microinverter” on page 23.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
17
Step 7: Terminate the Unused End of the Cable
Terminate the unused end of the Enphase Q Cable as follows:
Single-phase Q Cable
Three-phase Q Cable
A. Remove 13 mm of the
cable sheath from the
conductors.
Use the terminator body loop
to measure.
A. Remove 20 mm of the
cable sheath from the
conductors.
B. Slide the hex nut
onto the cable. The
grommet inside the
terminator body
must remain in place.
B. Slide the hex nut
onto the cable. The
grommet inside the
terminator body
must remain in place.
C. Insert the cable into
the terminator body so
that the two wires land
on opposite sides of the
internal separator.
C. Insert the cable into
the terminator body so
that the four wires land
on separate sides of the
internal separator.
D. Insert a screwdriver into
the slot onthe top of the
terminator to hold itin
place. Hold the
terminator body
stationary with the
screwdriver and
turn only the hex
nut to prevent the
conductors from
twisting out of the
separator.
Torque the nut to 7.0 Nm.
D. Bendthe wires
downinto the recesses
of the terminator body
and trim as needed.
Place the cap over
the terminator
body. Insert a
screwdriver
into the slot on the
terminator cap
to hold it in place.
Rotate the hex nut
with your hand or a wrench until the latching
mechanism meets the base. Do not over torque.
E. Attach the terminated cable end to the PV
racking with a cable clip or tie wrap so that the
cable and terminator do not touch the roof.
E. Attach the terminated cable end to the PV
racking with a cable clip or tie wrap so that the
cable and terminator do not touch the roof.
NOTE: Turn only the hex nut to prevent conductors from twisting out of the
separator.
WARNING: The terminator cannot be re-used. If you unscrew the nut, you must
discard the terminator.
13mm

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
18
Step 8: Complete Installation of the Junction Box
A. Connect the Enphase Q Cable into the junction box.
B. Refer to the wiring diagrams on page 39 for more information. Q Cable uses the following
color code:
Single-Phase
Three-Phase
Brown –L1
Blue –N
Brown –L1
Black –L2
Grey –L3
Blue –N
NOTE: The Q Cable internally rotates L1, L2, and L3 to provide balanced 400 VAC
(three-phase), thus alternating phases between microinverters.
NOTE: Minimise the number of unused Q Cable connectors with three-phase systems.
When cable connectors are left unused on a three-phase system, it creates a phase
imbalance on the branch circuit. If multiple cable connectors are skipped over multiple
branch circuits, the imbalance can multiply.
Step 9: Connect the PV Modules
WARNING: Electrical shock hazard. The DC conductors of this photovoltaic system are
ungrounded and may be energized.
A. Connect the DC leads of each PV module to the DC input connectors of the
corresponding microinverter.
B. Check the LED on the connector side of the microinverter. The LED flashes six times
when DC power is applied.
C. Mount the PV modules above the microinverters.
Status LED
DC Connector
AC Connector

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
19
Step 10: Energize the System
A. Turn ON the AC disconnect or circuit breaker for the branch circuit.
B. Turn ON the main utility-grid AC circuit breaker. Your system starts producing power
after a five-minute wait time.
C. Check the LED on the connector side of the microinverter:
LED color
Indicates
Flashing green
Normal operation. AC grid function is normal there is communication with the
Envoy-S.
Flashing orange
The AC grid is normal but there is no communication with the Envoy-S.
Flashing Red
The AC grid is either not present or not within specification.
Solid Red
There is an active “DC Resistance Low, Power Off Condition.” To reset, see
“DC Resistance Low –Power Off Condition” on page 20.
Set Up and Activate Monitoring
Refer to the Enphase Envoy-S Quick Install Guide to install the Envoy-S and set up system
monitoring and grid management functions. This guide leads you through the following:
•Connecting the Envoy
•Detect devices
•Connecting to Enlighten
•Registering the system
•Building the virtual array
NOTE: When the utility requires a profile other than the profile resident on the
microinverter, you must select an appropriate grid profile for your installation. You
can set the grid profile through Enlighten, during system registration, or through Installer
Toolkit at any time. You must have an Enphase Envoy to set or change the grid profile.
For more information on setting or changing the grid profile, refer to the Enphase Envoy-
S Installation and Operation Manual at enphase.com/support.

IQ 7 / IQ 7+ / IQ 7X / IQ 7A Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00044-02
20
Troubleshooting
Follow all the safety measures described throughout this manual. Qualified personnel can use the
following troubleshooting steps if the PV system does not operate correctly.
WARNING: Risk of electric shock. Do not attempt to repair the Enphase
Microinverter; it contains no user-serviceable parts. If it fails, contact Enphase
customer service to obtain an RMA (return merchandise authorization) number and
start the replacement process.
Status LED Indications and Error Reporting
The following section describes LED indications.
LED Operation
The status LED on each microinverter lights green about six seconds after DC power is applied. It
remains lit solid for two minutes, followed by six green blinks. After that, red blinks indicate that no
grid is present if the system is not yet energized.
Any short red blinks after DC power is first applied to the microinverter indicate a failure during
microinverter startup.
DC Resistance Low –Power Off Condition
For all IQ Series models, a solid red status LED when DC power has been cycled indicates the
microinverter has detected a DC Resistance Low –Power Off event. The LED will remain red and the
fault will continue to be reported by the Envoy until the error has been cleared.
An insulation resistance (IR) sensor in the microinverter measures the resistance between the
positive and negative PV inputs to ground. If either resistance drops below a threshold, the
microinverter stops power production and raises this condition. This may indicate defective module
insulation, defective wiring or connectors, moisture ingress, or a similar problem. Although the cause
may be temporary, this microinverter condition persists until the sensor is manually reset.
An Envoy-S is required to clear this condition. The condition clears on operator command unless
its cause is still present.
If a microinverter registers a “DC Resistance Low - Power Off” condition, you can attempt to clear this
condition. If the condition does not clear after you perform the following procedure, contact Customer
Support at https://enphase.com/en-us/support/global-contact.
There are two ways to send a clear message to the microinverter. Note that the condition will not
clear after sensor reset if the cause of the failure is still present. If the condition persists, contact your
installer or Enphase for possible replacement.
LED color
Indicates
Flashing green
Normal operation. AC grid function is normal there is communication with the Envoy-S.
Flashing orange
The AC grid is normal but there is no communication with the Envoy-S.
Flashing red
The AC grid is either not present or not within specification.
Solid red
There is an active “DC Resistance Low, Power Off Condition.” To reset, see “DC
Resistance Low –Power Off Condition” on page 20.