Enso pearl User manual

Welcome!
EC-200-P Instructions-v1.2.indd 1EC-200-P Instructions-v1.2.indd 1 21/5/2020 3:04 PM21/5/2020 3:04 PM

2
Table of Contents
4
6
8
9
10
12
13
14
16
Setting the Clock
Setting the Alarm
Timer Introduction
Interval Timing
Setting an Interval Timer
Repeat Timing
Changing the Timer Function
Setting the Audio Alert
Additional Features
EC-200-P Instructions-v1.2.indd 2EC-200-P Instructions-v1.2.indd 2 21/5/2020 3:04 PM21/5/2020 3:04 PM

3
The Story
Enso, the Japanese word for circle, is a
symbol of enlightenment, elegance, and the
universe. Drawn with a single clockwise
brushstroke, this Japanese symbol inspired
the design of the Enso Pearl.
The Enso Ring is slowly brushed around the clock
display, abstractly showing the relative amount of
elapsed time. This subtle display of time passage
frees your mind from the distracting thought of a
numerical countdown of time.
Soothing chimes from Tibetan & Japanese
singing bowls and bells gently
indicate the completion of a
Timer or Alarm.
EC-200-P Instructions-v1.2.indd 3EC-200-P Instructions-v1.2.indd 3 21/5/2020 3:04 PM21/5/2020 3:04 PM

4
Setting the Clock
Press to Finish Setting Clock.
Press the Button.
Adjust the Time.
Press or to Toggle
12/24-hour Format and Set Seconds to 0.
1
2
3
4
Press to increment time.
Press to decrement time.
Hold for fast
scrolling
EC-200-P Instructions-v1.2.indd 4EC-200-P Instructions-v1.2.indd 4 21/5/2020 3:04 PM21/5/2020 3:04 PM

-hr
Current
Time
12/24-hour
Format
EC-200-P Instructions-v1.2.indd 5EC-200-P Instructions-v1.2.indd 5 21/5/2020 3:04 PM21/5/2020 3:04 PM

6
Setting the Alarm
Press to Toggle Alarm On or Off.
When Alarm sounds, press to turn off.
When Alarm sounds, press to Snooze.
Hold for fast
scrolling
Adjust the Alarm.
2
Press to increment time.
Press to decrement time.
Press the Button.
1
Snooze Function: Alarm tone will be
silenced. Alarm will sound
again in 9 minutes.
3
EC-200-P Instructions-v1.2.indd 6EC-200-P Instructions-v1.2.indd 6 21/5/2020 3:04 PM21/5/2020 3:04 PM

Alarm Status
Indicator
Alarm
Time
EC-200-P Instructions-v1.2.indd 7EC-200-P Instructions-v1.2.indd 7 21/5/2020 3:04 PM21/5/2020 3:04 PM

8
The Enso Pearl has three separate
Timers ( ), each of which can be
configured with the following timing options:
Timer Introduction
Default Timer Settings
Timing Function
Time Format
Countdown: or
Count-up:
Interval (Int) Repeat
Hr:Min Min:Sec
Stopwatch
Interval (Int) Hr:Min
Interval (Int) Min:Sec
Repeat Min:Sec
or
EC-200-P Instructions-v1.2.indd 8EC-200-P Instructions-v1.2.indd 8 21/5/2020 3:04 PM21/5/2020 3:04 PM

9
Interval Timing
Example: 3-Interval Timer
. . . is the timing of a sequence of two
or more separate sub-timers (Intervals).
Each Interval is set for a specific duration of
time. Pressing begins the countdown
of each Interval one-after-another until the entire
timing sequence is complete. Interval Timers in
the Enso Pearl can each hold up to 99 Intervals.
EC-200-P Instructions-v1.2.indd 9EC-200-P Instructions-v1.2.indd 9 21/5/2020 3:04 PM21/5/2020 3:04 PM

10
t
Press the Button.
1
Press to decrement time.
Press to increment time.
Adjust the Duration of Current Interval.
2
Hold for fast
scrolling
Press to Edit Next Interval.
3
Repeat to Adjust Time of New Interval.
2
Repeat & to Add More Intervals.
2
3
Press for Previous Interval.
Press to Start Timer.
4
Setting an
Interval Timer
EC-200-P Instructions-v1.2.indd 10EC-200-P Instructions-v1.2.indd 10 21/5/2020 3:04 PM21/5/2020 3:04 PM

Timer
Format
Duration
of Current
Interval
Interval
Number
Timer #
Indicator Current
Time
Repeat
Indicator
EC-200-P Instructions-v1.2.indd 11EC-200-P Instructions-v1.2.indd 11 21/5/2020 3:04 PM21/5/2020 3:04 PM

12
Press to decrement time.
Press to increment time.
Timer is in Repeat mode when is visible.
Repeat Timing
. . . is the repetitive timing of a single
time duration. A single timer may be
repeated up to 99 times.
Press the Button to Use Repeat Timer.
1
Adjust the Duration of a Single Timer.
2
Hold for fast
scrolling
Press to Increase # of Repetitions.
Press to Decrease.
3
Press to Start Timer.
4
EC-200-P Instructions-v1.2.indd 12EC-200-P Instructions-v1.2.indd 12 21/5/2020 3:04 PM21/5/2020 3:04 PM

13
Stopwatch Function
Press , , or Button.
1
Press and Hold Button to Change
Timer Mode. Timer will cycle through the
following configurations for current timer:
2
Press on a blank (0) timer
to start the Timer counting up in
Stopwatch mode.
Changing
the Timer Function
EC-200-P Instructions-v1.2.indd 13EC-200-P Instructions-v1.2.indd 13 21/5/2020 3:04 PM21/5/2020 3:04 PM

14
Setting
the Audio Alert
Note: During a Timer, the selected Tone
will play once at the end of each Interval
or Repetition and twice at the end of the
full Timer. The selected tone will play
continuously when the Alarm is
triggered.
Press the Button.
1
Selected sound settings
apply to all Timers & Alarm.
Press or to Adjust the Volume.
Audio alert is muted if level 0is selected.
2
Press or to Change the Tone.
3
EC-200-P Instructions-v1.2.indd 14EC-200-P Instructions-v1.2.indd 14 21/5/2020 3:04 PM21/5/2020 3:04 PM

Volume
Level
Tone
Number
EC-200-P Instructions-v1.2.indd 15EC-200-P Instructions-v1.2.indd 15 21/5/2020 3:04 PM21/5/2020 3:04 PM

16
Additional Features
Hiding the Numerical Display During a Timer
Press and hold , , or
to reset respective timer
completely.
Resetting a Timer
Backlight
EC-200-P Instructions-v1.2.indd 16EC-200-P Instructions-v1.2.indd 16 21/5/2020 3:04 PM21/5/2020 3:04 PM

17
Changing
the Batteries
, .
g
EC-200-P Instructions-v1.2.indd 17EC-200-P Instructions-v1.2.indd 17 21/5/2020 3:04 PM21/5/2020 3:04 PM

FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. See
instructions if interference to radio or television reception is suspected.
Radio and Television Interference
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio TV technician for help.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
European Community
Complies with European Directive 89/336/EEC.
18
EC-200-P Instructions-v1.2.indd 18EC-200-P Instructions-v1.2.indd 18 21/5/2020 3:04 PM21/5/2020 3:04 PM

19
EC-200-P Instructions-v1.2.indd 19EC-200-P Instructions-v1.2.indd 19 21/5/2020 3:04 PM21/5/2020 3:04 PM

Thank you!
WG-EC-200-1
EC-200-P Instructions-v1.2.indd 20EC-200-P Instructions-v1.2.indd 20 21/5/2020 3:04 PM21/5/2020 3:04 PM