Enwork ZORI MEDIA CART CASTER PLATE User manual

1
Rev B
ZORI MEDIA CART CASTER
PLATE ASSEMBLY INSTRUCTIONS
TRAINING TABLES
ZI0008

2
INSTALLATION GUIDE
1) PARTS AND FASTENERS INCLUDED
2) TOOLS AND SUPPLIES REQUIRED
Caster on Plate10 x 1 Truss Head Square Drive Screw
Square Head Screw Driver Electric Drill

3
INSTALLATION GUIDE
3) ASSEMBLY OVERVIEW:
FIGURE 1 FRAME ASSEMBLY
FIGURE 2 CREDENZA
ASSEMBLY
FIGURE 3 CASTERS
FIGURE 4 CASTERS

4
INSTALLATION GUIDE
3) ASSEMBLY OVERVIEW CONT:
FIGURE 5
FIGURE 6
• Lay the Credenza Assembly(Fig.#1) top face down on
a non-marring surface. Fig.#5
• Attach the casters on the bottom panel, using the
diagrams on the nal page.
• Attach the base frame to the bottom panel using the
included (24) #10 x 1 Truss Head Square Drive Screws.
• Flip the Credenza Assembly/Base Frame Assembly
to an upright position and lock the casters. Fig.#6
• See Zori Media Cart Assembly Instructions for any
further assembly.

5
INSTALLATION GUIDE
CASTER PLACEMENT DIAGRAM

Specications subject to change without notice.
Rev 02.2020
1.800.815.7251
www.enwork.com
12900 Christopher Dr. Lowell, MI 49331