Seville Classics WEB483 User manual

022019
Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.
Model #: WEB483, WEB580 , WEB597
15-Drawer Organizer Cart
022019

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
A. Le Frame (1)
B. Right Frame (1)
D. Crossbar (4)
E. Shelf (1)
H. Pull (15)
K. Hex Key (1)
L. Locking Caster (2)
M. Caster (2)
N. Hex Screw (12)
O. Screw (15)
Required Tools (not included)
Screwdriver
F. Small Drawer (10)
G. Large Drawer (5)
I. Sleeves (4)
J. Washer (8)
C. Middle Frame (1)
FAQs
Q. Can I use it without the top shelf?
A. Yes! Simply pop o the top shelf for easy access to bins.
Q. Can I use it without the casters?
A. No, the cart is not designed to be used without the casters.
Q. Can I take the drawers out?
A. Yes! Use them by themselves or in the unit. Each holds up to 11 lbs.
Specicaons
Dimensions: 25.2" W x 15.35" D x 38.18" H
Weight capacity per drawer: 11 lbs. (5 kgs)
Weight capacity on top shelf: 16.5 lbs. (7.5 kgs)
Weight: 11 lbs.
Warranty
Seville Classics product is backed by a limited 1-year manufacturer's
warranty unless otherwise specied. The warranty protects against
original defects in material or workmanship under normal home or oce
use for the duraon of the warranty period.

STEP 5.
Clip on SHELF (E) to crossbars.
Insert DRAWERS (F,G) into guides carefully.
STEP 4.
Aach DRAWER PULLS (H) to DRAWERS (F,G) using SCREWS (O) and screwdriver.
Assembly Instrucons
STEP 1.
Insert SLEEVES (I) into booms of LEFT, RIGHT FRAMES (A,B).

STEP 2.
Insert HEX SCREW (N) through center of CROSSBARS (D) into top and boom ends
of MIDDLE FRAME (C) poles.
Tighten with HEX KEY (K).
Repeat for all CROSSBARS (D).
STEP 3.
Aach LEFT, RIGHT FRAMES (A,B) to CROSSBARS (D) with HEX SCREWS (N).
MAKE SURE to t WASHERS (J) between
crossbar ends and frames.
Flat side of washer MUST face end of crossbar.
Curved side of washer MUST t around frame.
Press LOCKING CASTERS (L) and CASTERS (M) into the sleeves installed in STEP 1.
Tighten all HEX SCREWS (N) with HEX KEY (K).