Epic Perfect Sit & Sleep User manual

DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [e-mail] (reply within one business day)
Live Assembly Assistance
888.608.6086 (Business Days 10am-5pm Central Time)
Please have your order # as well as access to the item
need help with assembly or trouble shooting, please call:
888.608.6086 or email us at
[e-mail]
Please Do Not Return
Your Item to the Retailer
Thank you for your purchase of an Epic Furnishings item
You should enjoy many years of trouble free, dependable use
If for any reason you are missing parts, have damaged parts, or
Assembly
Instructions

DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [e-mail] (reply within one business day)
Live Assembly Assistance
888.608.6086 (Business Days 10am-5pm Central Time)
Perfect® Sit & Sleep Page 1 of 4
Items in Box
Perfect Cover (1pc.)
STEP 1: Adhere Velcro to Front & Back Stretcher Rails (no pleats if chair)
Coil Inserts (2pcs.)
Pillow Covers (2pcs.)
if chair, no pillow covers
Velcro (2pcs.)
Velcro Pillow Inserts (2pcs.)
if chair, no pillow inserts
Assembled Futon Frame (1pc.)
chair frame if chair (arm style will vary based on your selection)
ITEMS REQUIRED FOR
INSTALLATION:
Perfect Front Skirt (1pc.)
Gradually remove the Velcro adhesive protective liner and adhere
the Velcro to the outside of a Stretcher Rail by aligning the top
edge of the Velcro with the top edge of the Stretcher Rail. It works
the best by starting at one end and pull away a few inches of the
adhesive liner and press the Velcro to the rail. Continue this
process until you reach the other end. Repeat for the other
Stretcher Rail. Velcro Front Skirt to Front Stretcher Rail.
BEFORE YOU GET STARTED:Begin installation of the Perfect Sit &
Sleep Cover Set only after you have completed assembly of your futon frame (if
you have mattress retainers installed on your Seat Section, remove them before
continuing). Secondly, you can steam and/or iron press your cover components
but be VERY CAREFUL such as use a cloth, low temperature, and only press on
the wrong side of the fabric particularly important for leather fabrics.
Assembly
Instructions

DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [e-mail] (reply within one business day)
Live Assembly Assistance
888.608.6086 (Business Days 10am-5pm Central Time)
Perfect® Sit & Sleep Page 2 of 4
Assembly Instructions
STEP 2: Insert Coil Inserts
Spread the Perfect cover right side down on a clean surface. Insert the Coil Inserts into both the seat
and the back sections as shown in the following diagram. If you have a a full-size, both the Coil Inserts
are the same size. If you have a queen-size, the Coil Insert for the back section is wider and needs to
be inserted into the wider back section which has the back flap and back skirt attached. For easier
closure and best results, hand compress the Coil Inserts as you zip to close.
Assembly
Instructions

DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [e-mail] (reply within one business day)
Live Assembly Assistance
888.608.6086 (Business Days 10am-5pm Central Time)
Perfect® Sit & Sleep Page 3 of 4
Assembly Instructions
STEP 3: Put Cover with Coil Inserts On Frame
Note: This step is best completed with the help
of another person.
Place your frame in the sitting position. Pick up the Cover with the coils
inserted and set in the frame with the back flap going over the Back
Section. Lift up the Seat Section to get the seat flap to go under
the Seat Section.
STEP 4: Secure cover to Seat Deck
Note: This step is best completed with the help
of another person.
Stand in front of your frame and lift the seat section
exposing the underside of the seat. There are five (if chair, three)
straps attached to the seat cover that need to be wrapped around
the seat back long rail of the seat section and then
velcroed snuggly.
See picture and
diagram.
Assembly
Instructions

DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
24/7 email: [e-mail] (reply within one business day)
Live Assembly Assistance
888.608.6086 (Business Days 10am-5pm Central Time)
Perfect® Sit & Sleep Page 4 of 4
Assembly Instructions
STEP 5: Velcro Back Cover to Back Stretcher Rail
Press the Velcro on the inside of the back flap of the Cover
to the Velcro previously adhered to the back Stretcher Rail in Step 2
as shown in the diagram.
The Back Flap will be a bit loose to accommodate conversion.
STEP 6: Stuff Pillow Covers (if chair, skip this step)
Insert pillows into the pillow covers as shown below (2pcs.)
STEP 7: if chair, skip this step
Place pillows as you like and transform your Perfect® Sit & Sleep
into a perfect sofa/chair or a perfect sleeper as shown
on the futon frame assembly instructions
Congratulations!!! Installation Complete
Assembly
Instructions