Epic StoBed User manual

If for any reason you are missing parts, have damaged parts, or
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
Live Assembly Assistance (you must provide a valid order #)
888.608.6086(Business Days 10am-5pm Central Time)
24/7 email: [e-mail](reply within one business day)
Please have your order # as well as access to the item
Please Do Not Return
Your Item to the Retailer
[email protected]
need help with assembly or trouble shooting, please call:
888.608.6086 or email us at
Thank you for your purchase of an Epic Furnishings item
You should enjoy many years of trouble free, dependable use
Assembly
Instructions

StoBed
Getting Started
Part # Queen King Full Twin Part #
Queen
King Full Twin
12 2 2 2 A Long Bolt 11 11 11 8
24 4 4 4 B Short Bolt 8 8 8 8
32 2 2 2 C Lock Washer
19 19 19 16
41 1 1 0 D Flat Washer 19 19 19 16
53 3 3 0 E Allen Key 1 1 1 1
613 13 12 12 F39 39 36 24
G Adjustable Foot 3 3 3 0
H Corner Brackets 4 4 4 4
Description
Qty
Head/Foot Boards
Center Support Legs
Cross Slats Unfinished
Corner Legs
Side Rails
Center Support Rail
Description
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
Live Assembly Assistance (you must provide a valid order #)
888.608.6086(Business Days 10am-5pm Central Time)
24/7 email: [e-mail](reply within one business day)
Page 1 of 4
THANK YOU for selecting an Epic Furnishings bed. We've taken great care in the design and hand crafting of each piece so that assembling your bed is enjoyable
and rewarding. By carefully following the assembly instructions, you will have created a piece of furniture that will provide years of enjoyment.
Qty
Screw
BEFORE YOU BEGIN ASSEMBLY be sure you have all components for the bed. Select a suitable area for
assembly of the unit, preferable an open space on soft carpet. If assembling on a hard floor, we recommend
laying down a blanket so that you will not scratch or mark either furniture or floor. If available, a power
screwdriver will be quite helpful. We take great care to make sure each piece comes with everything you'll need. If
you find a part missing(don't worry about any overage) or have questions, just call us toll-free in the U.S.A. at
888.608.6086 during 10am to 5pm Central Time normal business days.
Assembly
Instructions

StoBed
Step 1 Attach Corner Brackets to Side Rails
1.1 Attach the Corner Bracket to each end of the two Side Rails
Note: The inside of the Side Rail has the Lip attached to it. The Lip will be
with the Small Bolt, then Lock Washer, then Flat Washer, attached to the bottom of the Side Rail. Also please make sure the bolts
then the Corner Bracket, then the Side Rail using the Allen Key. attaching the Lip to the Side rail are tight. Tighten any loose Lip bolts with the Allen Key.
edge. The sticker location also indicates the inside side of the
Side Rail which is where the Short Bolt inserts are located.
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
Live Assembly Assistance (you must provide a valid order #)
888.608.6086(Business Days 10am-5pm Central Time)
24/7 email: [e-mail](reply within one business day)
Be sure to note that the the Side Rail has a sticker noting its top
Page 2 of 4
Assembly
Instructions

StoBed
Step 2 Attaching Side Rails to Head & Foot Boards with Corner Legs
2.1 Place the Side Rails top side on the floor(the Lip will be farthest from the floor
and towards the inside of the frame.
2.2 Place the Head/Foot Board top side on the floor (the label will be pointing
towards the floor and facing the inside of the frame)
2.3 Attach the Side Rails to the Head and Foot Boards using the Long Bolt,
then the Lock Washer, then the Flat Washer, then the Corner Bracket,
then the Head or Foot Board, and then the Leg using the Allen Key.
Note: the Long Bolt goes through the hole in the Front or Back Rail
into the threaded inserts in the Leg
Note: The Leg direction matters, the curved side of the Leg faces the inside of
the frame. Also the narrow end of the Leg will set on the floor so it should
be sticking up for this step.
2.4 Repeat this process a total of 8 times, two at each of the 4 inside corners
2.5 Once finishes with all four corners, with two people, flip frame right side up.
Step 3 Assemble Center Support Rail(skip this step if Twin-size)
3.1 Screw the Adjustable Foot to the bottom of each Center Support Leg.
3.2 Attach the Center Support Legs to the Center Support Rail using
the Long Bolt, then the Lock Washer, then the Flat Washer,
then the Center Support Rail, then the Center Support Leg.
3.3 Repeat for all three Center Support Legs.
Live Assembly Assistance (you must provide a valid order #)
888.608.6086(Business Days 10am-5pm Central Time)
24/7 email: [e-mail](reply within one business day)
Page 3 of 4
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
Assembly
Instructions

StoBed
Step 4 Attach Cross Slats
4.2 Align the Center Support Rail with the holes in the center of the Cross Slats.
4.3 Attach Cross Slat with Screw at both Lips and Center Support Rail
(Twin-size does not have a Center Support Rail)
In other words, two Screws Per Twin Cross Slat, three Screws per Full or Queen Cross Slat,
and three Screws per King Cross Slat.
Note: It is recommended to screw each side of the Cross Slat into the Lips and then the
Center Support Rail before proceeding on the next Cross Slat
4.4 Repeat for all Cross Slats (12 Cross Slats for Twin and Full,
13 Cross Slats for Queen and King)
Step 5 Adjust Center Support Leg Height(skip this step if Twin-size)
Congratulations!!! Your Bed is Assembled
4.1 Align Cross Slat holes with pre-drilled Lip holes starting closest to the Front Rail
and lay Cross Slat parallel to the Front Rail on top of the Lip.
In the event a Center Support Leg is a bit short of the floor, simply adjust its length by turning the Adjustable Foot on the bottom of the Center Support Leg.
DO NOT RETURN PRODUCT TO YOUR RETAILER
Contact Technical Support
888.608.6086(Business Days 10am-5pm Central Time)
24/7 email: [e-mail](reply within one business day)
Page 4 of 4
Live Assembly Assistance (you must provide a valid order #)
Assembly
Instructions