ePropulsion DCS18100 User manual

eLite Solar
Charger Manual
Suitable for eLite Electric Outboard Motor
Motor: DCS18100
Please read this manual carefully before use.

1
Introduction
Thank you for purchasing ePropulsion Solar Charge Controller. This solar charge controller
is specially designed for eLite Electric Outboard Motor. Fast Maximum Power Point Tracking
(MPPT) technology (efficiency ≥99.9%) precisely positions the maximum power point of PV
cells thus drawing more Photovoltaic energy. With improved system efficiency, the charging
conversion efficiency reaches as high as 90%. The controller is not only designed to work
perfectly with a wide variety of solar panels with input voltage ≤18V. but also can get power
from other sources with input voltage of 12V DC.
Declaration of Conformity
We Guangdong ePropulsion Technology Limited, hereby, declares that this equipment is
compliance with the applicable Directives and European Norms, and amendments.
Object of the Declaration:Product:
Product: eLite Solar Charger
Model: DCS18100
The object of the declaration is in conformity with the following directives:
Electromagnetic Compatibility (EMC) 2014/30/EU
RoHS 2.0 Directive(RoHS) 2011/65/EU and (EU)2015/863
Applied Standards:
EN IEC 61000-6-3:2021
EN IEC 61000-6-1:2019
EN 62321-2:2014
EN 62321-3-1:2014
EN 62321-4:2014+A1:2017
EN 62321-5:2014
EN 62321-6:2015
EN 62321-7-1:2015
EN 62321-7-2:2017
EN 62321-8:2017
EC REP
Name: REP Europe GmbH
Address: Werner-von-Siemens-Str. 264319 Pfungstadt Germany
Phone: [phone]
[e-mail]
Manufacturer

2
Name: Guangdong ePropulsion Technology Limited
Address: Room 801, Building 1, 11 Daxue Road, Songshan Lake, Dongguan, Guangdong
Province, China
Signature: Date: 2nd of Jan, 2023
Shizheng Tao, Chief Executive Officer & Cofounder of Guangdong ePropulsion Technology
Limited
Statement
Operationissubjecttothefollowingthreeconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Note:
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitalde-
vice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasona-
bleprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgen-
erates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccord-
ancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.Howev-
er,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequip-
mentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeter-
minedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterfer-
encebyoneormoreofthefollowingmeasures:
—Reorientorrelocatethereceivingantenna.
—Increasetheseparationbetweentheequipmentandreceiver.
—Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Disposal and environment
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health

3
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Specifications
Battery
Rated system voltage 25.2V
Charging Voltage Range 19 - 30V
MPPT Charging Voltage @ 25 C ≤25.2V
CV Charging Voltage @25 C 25.2V
Maximum CC Charging Current 4A
PV
Power 100W
Maximum Input Charging Current 10A
Open Voltage <23V
MPPT Tracking Range 12V≤Vp≤18V
System
MPPT Efficiency ≥99.9%
Power Consumption < 10mA
Temperature Protection >70℃
Storage/Operation Temperature -35~65℃
Storage/Operation Humidity 65%±25%RH
Altitude 3000m
Protection Grade IP67
Certification
CE-EMC
ROHS
FCC-SDOC
Power Display 1 Bi-colored LED
Weight 403g
Dimensions 100X82X23.5mm
12V Cable length Approx. 1.3m

4
Operations
Step 1: Connecting to eLite Electric Outboard Motor.
Step 2: Connecting to Power Source
a. Connecting to a Solar Panel
Connect the solar charge controller to the solar panel.
Input voltage of solar panel should be ≤ 23V
b. Connecting to 12V Power Source
First Connect the solar charge controller with the 12V Input Cable, then connect
the 12V Input Cable to the 12V power source on your boat or car.
LED Indicator
There is a bio-colored LED indicating mode of the solar charger.
LED Color LED Status Mode
Blue
Steady light Standby
Flashing Light slowly Charging
Red Flashing Light quickly Error
1 2 3
4
A
B
3 2 1
B
A
C
D
C
g
单位:mm
广东逸动科技有限公司
4
Solar Panel
12V Power
Source 12V
Input cable

5
Notes
Do not puncture, throw, drop, bend or modify the Solar Charge Controller.
The controller should be used in well ventilated, dry, particle free environment.
The controller should avoid direct sun exposure.
The aluminum case is an important means of heat dissipation, thus should not be covered.
Opening the housing of the charger without prior written consent of the manufacturer
voids the manufacturer’s warranty immediately.
Warranty
ePropulsion Solar Charge Controller is guaranteed against any manufacturing defects for TWO
years from date of delivery of products to end customers.
Free warranty is only validated upon the presentation of legal serial number, Warranty Card, and
evidence of purchase from an authorized ePropulsion dealer.
Conditions:
Valid date of purchase should be established by the rst-hand purchaser with original sales slip.
Free warranty is not transferable and will not be reissued.
The warranty is valid only when the information is correct and complete.
Warranty does not cover:
Minor faults producing no inuence on the intended function of the product.
Faults resulting from any improper operation that contradicts the user manual.
Accessories supplied with the product.
Damage caused by accident, misuse or unauthorized repair.
Damage caused by dropping, improper care or storage.
If warranty expires, users can still enjoy maintenance services from ePropulsion authorized deal-
ers with minimum maintenance charge.
Packing List
Item Qty.
Solar Charge Controller 1 Set
12V Input Cable 1 PC
Manual 1 PC
MC4 Connector Spanner 1 PC

Thanks for reading this user manual.
If you have any concerns or find any problems while reading,
please don't hesitate to contact us. We are delighted to offer
service for you.
Guangdong ePropulsion Technology Limited
Webseite: www.epropulsion.com
E-Mail: [email protected]