Epson P3000 - Digital AV Player Installation guide

P-3000/P-5000
Basics

2
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson product. Epson is not responsible for
any use of this information as applied to other equipment.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs, or expenses
incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with Seiko
Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems
arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
Trademarks
Epson and Photo Fine are registered trademarks and Exceed Your Vision is a
trademark of Seiko Epson Corporation.
Epson Connection is a service mark of Epson America, Inc.
QuickTime and the QuickTime logo are trademarks or registered trademarks
of Apple, Inc., used under license.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and
are used under license.
CompactFlash is a registered trademark of SanDisk Corporation.
SD is a trademark of SD Card.
General notice: Other product names used herein are for identification
purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
Patents 5,809,336 5,784,584 6,598,148
© 2007 Epson America, Inc. 3/07 CPD-22470R1

3
Contents
Introduction 5
About Your Software and User’s Guide 6
Getting Started 7
Unpacking Your P-3000/P-5000 7
Installing the Battery 8
Charging the Battery 9
Turning the Viewer On and Off 10
Setting the Language, Date, and Time 11
Installing Your Software and User’s Guide 13
Using Memory Cards 16
Inserting and Removing Memory Cards 16
Copying Files from a Memory Card 20
Supported File Formats 24
Viewing Photos and Videos 25
Viewing Photos 25
Rating Photos 28
Creating a Slide Show 29
Playing Videos 30
Showing Photos and Videos on a TV 32

4
Using the Viewer with USB Devices 34
Connecting a USB Device 35
Copying Files to the Viewer 36
Copying Files to the USB Device 37
Playing Music 41
Copying Music Files from Your Computer 41
Playing Audio Files 43
Managing Your Files 47
Copying Files to a Folder 47
Deleting Files or Folders 50
Backing Up Files to Your Computer 51
Solving Problems 53
Operating Problems 53
Viewing Problems 54
Replacing the Battery 55
Where To Get Help 55
Appendix 57
Important Safety Instructions 57
Responsible Use of Copyrighted Materials 59
Epson America, Inc. Limited Warranty 62
Index 65

5
Introduction
Your Epson®P-3000/P-5000 multimedia storage viewer
lets you enjoy photos, videos, and music wherever you
go. Its features include:
◗Large, high-quality 4-inch LCD with Photo Fine®
Ultra technology and true Adobe®RGB
◗Support for JPEG files and RAW files from select
digital SLR cameras
◗MP3 and AAC audio with music playlists
◗MPEG4, Motion JPEG, and DivX™(with DRM)
video
◗40GB (P-3000) or 80GB (P-5000) hard drive
◗Two slots for CompactFlash®and SD™(Secure
Digital) memory cards
◗Hi-speed USB 2.0 interface to share data with other
USB devices
◗Link2 software to transfer and manage your files
from a PC or Macintosh®computer
◗Direct printing to PictBridge®printers (see the
on-screen User’s Guide for instructions)
◗Video output to display pictures on a TV or
projector

6
About Your Software and User’s Guide
The following software is included on your P-3000/
P-5000 multimedia storage viewer:
◗Epson Link2 software to transfer photos, videos, and
music back and forth between your computer and
viewer
◗Epson P-3000/P-5000 User’s Guide for instructions
on all the features of your viewer
◗Apple®QuickTime®7 for Windows®
See page 13 to install the software on your computer and
view your User’s Guide.

7
Getting Started
Follow the instructions in this section to set up your
P-3000/P-5000.
Unpacking Your P-3000/P-5000
AC adapter
Strap
Lithium-ion battery
USB cable
Carrying case
Epson P-3000/P-5000
Power cord

8
Installing the Battery
1Open the battery cover.
2Insert the battery.
3Close the battery cover.
Note:
If you need to remove the battery, open the battery cover,
then push the latch (shown above) to the left.
Latch for
removing
battery

9
Charging the Battery
Plug the AC adapter into the viewer. Connect the power
cord to the adapter and plug it into an electrical outlet.
The Charge light turns on. It takes about 3.5 hours to
charge the battery when the viewer is not in use.
Caution:
Do not use the viewer without the battery installed. Turn off
the viewer before disconnecting the adapter.
The battery status is displayed in the upper-right corner
of the screen when the viewer is on:
Battery is fully charged.
Battery power is about half full.
Battery power is low.
Battery power is running out. Charge the battery using the
AC adapter.
Battery is charging.
Charge light

10
Turning the Viewer On and Off
To turn on the viewer, slide the power switch down and
release it.
Turning Off the Viewer
To turn off the viewer, make sure the memory card access
light is off (see page 17), then slide the power switch
down and hold it until you see the message Shutting
Down.
Note:
If the viewer is in sleep mode, press any button to wake it.
Then turn it off as described above.
If the viewer is idle for 10 minutes, it shuts off automatically
to save battery power. See the on-screen User’s Guide if
you want to change this setting.

11
Setting the Language, Date, and Time
When you turn on the viewer the first time, you see the
Language setting screen:
1Press OK to select English. You see a message about
setting the date.
2Press OK. You see the Date and Time screen:

12
3Press right or left on the 4-way
ring to highlight a setting to
change.
4Press up or down to change the
setting.
5When you’re done changing the date and time,
highlight Complete and press OK.
You see the Home screen:
Note:
If you remove the battery, the date and time settings will be
erased after about one day. The next time you turn on the
viewer, the Date and Time screen will be displayed.
If you want to change the settings at any time, select
Settings on the Home screen, then select Date and Time.
4-way
ring

13
Installing Your Software and User’s
Guide
To transfer files between your computer and viewer,
convert video and audio files, and create music playlists,
you need to install the Epson Link2 software. The
P-3000/P-5000 User’s Guide installs with the software
and gives detailed instructions on using the viewer, safety
instructions, and other information.
Note:
During the installation process you may need to enter your
administrator name and password.
1Connect the AC adapter to your viewer (see page 9).
2Turn on the viewer and your computer.
3Use the included USB cable to connect the viewer to
your computer.
The viewer LCD screen turns off and your computer
recognizes the viewer as a remmovable drive.
Smaller endLarger end

14
4Open the P-3000 or P-5000 drive on your computer
by double-clicking it.
5Double-click the installation software located in the
root of the drive:
◗Windows: P-3000_WIN_SOFTWARE or
P-5000_WIN_SOFTWARE
◗Macintosh: P-3000_MAC_SOFTWARE or
P-5000_MAC_SOFTWARE
Note: In Windows Vista,™ if you see the User Account
Control screen during installation, click Allow.
6Macintosh OS X: Double-click the Mac OS X icon
to continue the installation.
7Follow the instructions on your computer screen to
install the Epson Link2 software, Apple QuickTime
(Windows only), and User’s Guide.
8When installation is complete, click Exit.
9When you see the product registration screen,
register your P-3000/P-5000 as instructed.
10 Restart your computer to use the installed software.

15
Note:
To view the User’s Guide, double-click its icon on your
desktop. You need to have Adobe Reader®or Acrobat®
installed on your system to view the guide. You can
download this application at www.adobe.com.
Do not remove the software from the viewer after installing
it on your computer, in case you need to reinstall it.

16
Using Memory Cards
Follow the instructions in this section to insert a memory
card and copy files to your P-3000/P-5000.
Inserting and Removing Memory
Cards
The P-3000/P-5000 supports the following types of
memory cards:
◗CompactFlash (CF) memory card (Type1/Type2)
and MicroDrive™
◗SD (Secure Digital) and SD HC™(High Capacity)
memory cards (up to 2 GB)
◗MultiMediaCard™(up to 1GB)
With a commercially available CompactFlash adapter,
you can use many other types of memory cards in the
CF Card slot, such as miniSD,
™RS-MMC, Memory
Stick®Duo, Memory Stick PRO Duo,
™and xD-Picture
Card.
™

17
Caution:
Never remove a memory card while the memory card access
light is flashing, or files may be lost or damaged. Make sure
you insert memory cards in the correct orientation, or the card
and viewer may be damaged.
Do not put labels or stickers on memory cards. The sticker
may peel off, preventing the card from being ejected and
damaging the viewer.
Using the CF Card Slot
Insert the memory card into the slot with the label facing
forward. Then push the memory card all the way into
the slot.
If you are using a CompactFlash adapter, put the card
into the adapter and insert the adapter into the slot.
Memory card
access light

18
To remove a card from the CF Card slot, first make sure
the memory card access light is off. Then press the eject
button and pull out the card.
If the button is not sticking out, press it once to pop it
out, then press it again to eject the card.
Note:
If you are using a CompactFlash adapter, remove the
adapter from the viewer; do not remove only the memory
card.

19
Using the SD Card Slot
Insert an SD or SD HC card into the slot as shown
below. Insert it fully into the viewer.
To remove a card from the SD Card slot, first make sure
the memory card access light is off. Then press in on the
top of the card. When the card pops out, pull it out of
the slot.
Memory card
access light

20
Copying Files from a Memory Card
After you insert a memory card (as described on page 17
or 19), you can copy some or all of the files on the card
to the Backup Files folder on the viewer.
Copying All files
1On the Home screen, use the 4-way ring to highlight
Memory Card, then press OK. You see this menu:
2Select CF Memory Card Backup or SD Memory
Card Backup, then press OK. The files are copied to
a folder that is automatically created in the Backup
Files folder on the viewer.
Note:
The folder is named according to the date, for example,
12252006.001. You can change the date format by
selecting Settings > Date and Time on the Home
screen (see page 11). Folders are numbered in the order
they are copied.
Memory Card
CF Memory Card Backup
Browse CF Memory Card
SD Memory Card Backup
Browse SD Memory Card