Epson T557 User manual

Inkjet Refilling Instruction
R
Re ef fi il ll l
I
In ns st tr ru uc ct ti io on ns s
Epson T557
Note: This cartridge requires Specialty Color Inks which are sold
separately.
Note: User discretion is advised. Please follow instructions closely
so as to not damage the mylar bags on the interior of the cartridge.
1. Gentle peel back the back edge of the label to expose the
engagement tabs as shown below at right.
2. Using small flathead screwdriver,
gently pry open the 5 locking tabs on
the front of the cartridge as shown at
right. Start on one side and work
across towards the other, see image
below right for location of tabs.
3. Once the front of the cartridge is
loose lift the front up and the top
should come right off.
4. Carefully lift out the color (see below for color codes) to be refilled
and set on a paper towel.

Inkjet Refilling Instruction
5. Attach needle to syringe and fill with appropriate ink. (see below for
location of filling hole). Insert just the
tip of the syringe into the access fill
hole and EXTREMELY SLOWLY inject
up to 11 ml of ink into the mylar bag.
The tip of the needle need to be placed
in the middle of the access fill hole for
the bag to accept ink.
6. Rinse syringe with water before
proceeding to refill the next cartridge.
7. Seal the filling hole with the included
tape dot and proceed to the next
color.
Note: Immediately refill
any empty cartridges.