Epson 2200 - Stylus Photo Color Inkjet Printer Dimensions

Page 1 of 1
PSB.2004.04.004
EPSON PRODUCT SUPPORT BULLETIN
Date: 03/18/2004 Originator: TC
PSB #: PSB.2004.04.004 Authorization:
Reference: N/A Total Pages: 1
Product(s): Stylus Photo 2200/R300/R300M/R800/RX500/RX600, and the Stylus CX6400
Subject: Windows XP warning message for HI-SPEED USB (USB 2.0) Devices
This bulletin was created to inform you of a Windows XP warning message that comes up when an
EPSON HI-SPEED USB (USB 2.0) Printer or All-in-One device is connected to a non-HI-SPEED
USB (USB 1.1) Port. The message is only an indication that Windows XP recognizes a USB 2.0
device is connected to a USB 1.1 port. This warning message appears the first time the printer is
connected to the computer, and every time the printer is powered on. It is NOT an error message.
The message cannot be disabled, but you can close it by clicking on the “X” as shown in the red box
below.
If you click anywhere in the message box, you will see the screen below:
Click on the “Close” button to close the window.

Page 1 of 2
EPSON PRODUCT SUPPORT BULLETIN
Date: 04/23/2003 Originator: JAM
PSB #: PSB.2003.05.007 Authorization:
Reference: N/A Total Pages: 2
Product(s): Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server
Subject: Stylus Photo 2200 printer not available in OS X Print Center
This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b
Wireless Print Server.
Reasons:
If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer
cannot be found in the Apple Print Center.
Recommendations:
Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,
update the firmware to 3.99 using the instructions listed below.
How to verify the firmware version:
Print a status sheet from the print server. On the third line of the status sheet the firmware
version will be listed as follows:
FW Ver. WLES-3.96 (2002.06.05)
File location:
The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the
Epson website; http://www.epson.com.

Page 2 of 2
Updating the firmware:
1.) Configure the Mac and the print server for TCP/IP.
2.) Download/copy the “WLEP399.bin” firmware file from the epson10651.sea.hqx to
the Apple Desktop.
3.) Navigate to Macintosh HD>Applications>Utilities>Terminal
4.) At the terminal screen do the following:
1. Type cd desktop then press the RETURN key
2. Type tftp <ipaddress* of the print server> then press the RETURN key
3. At the tftp> prompt, type binary then press the RETURN key
4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key
*Where ipaddress is the IP address of the Wireless print server. Examples
135.79.2.468 or 10.0.1.3
**Where WLEP399.bin is the filename of the 3.99 firmware update.
5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes
were sent. This means the update is complete.
5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the
print server. At WP-Admin in the search screen, click on CLEAR,then click on START for
the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.
Search for the printer:
Once the update is complete, open the Print Center.
Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus
Photo 2200 printer.

Page 1 of 2
EPSON PRODUCT SUPPORT BULLETIN
Date: 04/23/2003 Originator: JAM
PSB #: PSB.2003.05.007 Authorization:
Reference: N/A Total Pages: 2
Product(s): Epson Stylus Photo 2200 printer and 802.11b Wireless Print Server
Subject: Stylus Photo 2200 printer not available in OS X Print Center
This bulletin was created to inform you of a firmware update required for the EpsonNet 802.11b
Wireless Print Server.
Reasons:
If any existing OS X system is updated to version 10.2.3, the Epson Stylus Photo 2200 printer
cannot be found in the Apple Print Center.
Recommendations:
Verify the current version of the firmware on the Print Server. If the version is 3.96 or lower,
update the firmware to 3.99 using the instructions listed below.
How to verify the firmware version:
Print a status sheet from the print server. On the third line of the status sheet the firmware
version will be listed as follows:
FW Ver. WLES-3.96 (2002.06.05)
File location:
The firmware update file, epson10651.sea.hqx, and this bulletin are posted on the
Epson website; http://www.epson.com.

Page 2 of 2
Updating the firmware:
1.) Configure the Mac and the print server for TCP/IP.
2.) Download/copy the “WLEP399.bin” firmware file from the epson10651.sea.hqx to
the Apple Desktop.
3.) Navigate to Macintosh HD>Applications>Utilities>Terminal
4.) At the terminal screen do the following:
1. Type cd desktop then press the RETURN key
2. Type tftp <ipaddress* of the print server> then press the RETURN key
3. At the tftp> prompt, type binary then press the RETURN key
4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key
*Where ipaddress is the IP address of the Wireless print server. Examples
135.79.2.468 or 10.0.1.3
**Where WLEP399.bin is the filename of the 3.99 firmware update.
5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes
were sent. This means the update is complete.
5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the
print server. At WP-Admin in the search screen, click on CLEAR,then click on START for
the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.
Search for the printer:
Once the update is complete, open the Print Center.
Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus
Photo 2200 printer.

Page 1 of 1
Service required
Parts inside your printer at theend of their
servicelife. Contact your dealer for replacement.
Parts inside your printer at the
end of their service life. Contact
your dealer for replacement.
EPSON PRODUCT SUPPORT BULLETIN
Date: 1/10/2003 Originator: PH
PSB #: PSB.2003.01.001 Authorization:
Reference: TE02-442 Total Pages: 1
Product(s): Stylus C80, C82, CX5200, Stylus Photo 960, 2200
Subject: Maintenance request message
This bulletin was created to inform you of the maintenance request message. When the
following message appears, the waste ink pads inside the printer are full and need to be
replaced. You should take the unit to your local servicer to do the replacement.
For information on finding your nearest authorized servicer contact Epson at 1-800-922-8911
or go to WWW.EPSON.COM.