Epson Wf-c5310 Instruction Manual

6 Insert the ink pack tray into the printer. Repeat steps 2 to

6 for the other ink packs.

Note: The ink packs are keyed to t into the correct color slot.

If you cannot insert the ink pack tray all the way, do not force

it. Make sure the ink pack color matches the color slot on the

printer.

7 Close the ink pack tray cover and lock it.

8 WF-C5310/WF-C5390: Select Installed using the arrow

buttons and press the OK button to start charging the ink.

WF-C5810/WF-C5890: Select OK on the LCD screen to

start charging the ink.

Ink charging takes approximately 9 minutes. A message

appears when ink charging is complete.

Caution: Do not unplug or turn o the product, raise the printer

cover or scanner unit, or open the ink tray cover while the product

is charging or you’ll waste ink.

9 Follow the instructions on the LCD screen to adjust the

print quality.

Note: You need to load paper before you can adjust the print

quality. See “Load paper” for details.

4Load paper

See the online User’s Guide for information about loading

capacity, available paper types and sizes, loading

envelopes, and using the rear paper feed slot or ADF

(WF-C5810/WF-C5890).

1 Make sure the product is done charging the ink, then pull

out the paper cassette.

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: This printer is designed for use with Epson® ink packs only, not

third-party ink. For important ink information, visit

http://latin.epson.com/tintaepson or see your printer box.

Important Safety Instructions: When using telephone equipment, you

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution: To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

The illustrations show the WF-C5890, but the steps are the same

for all models, unless otherwise specied.

Note: Not all products are available in all regions.

1Unpack

WF-C5810/WF-C5890WF-C5310/WF-C5390

Warning: The product is heavy and should be lifted and moved by two

people.

Note: If you purchased an optional paper cassette, see the online

User’s Guide for installation instructions.

1 Remove all protective materials from the product.

Note: Keep the two protective pieces shown after removing

them from inside the product. You will need them if you transport

your product. See the online User’s Guide for transportation

instructions.

2 Lift up the printer cover (WF-C5310/WF-C5390) or scanner

unit (WF-C5810/WF-C5890) and remove all protective

materials from inside the product, then close the printer

cover or scanner unit.

WF-C5810/WF-C5890WF-C5310/WF-C5390

3 Insert the output tray, then set it down gently.

2Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

WF-C5310/WF-C5390 WF-C5810/WF-C5890

Caution: Do not connect to your computer yet.

2 Raise the control panel and turn on the product.

Note: If an error code appears, turn o the product and check that

no protective material has been left inside the product.

3 WF-C5310/WF-C5390: Select your language, date, and

time using the arrow buttons and OK button.

WF-C5810/WF-C5890: Select your language, country, date,

and time on the LCD screen.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

3Install ink supply units

(ink packs)

Caution: Keep the ink packs out of the reach of children and do not

drink the ink.

Note: The included initial ink packs are designed for reliable printer setup

and cannot be used as replacement ink packs or resold. After setup, the

remaining ink is available for printing.

1 Unlock and open the ink pack tray cover.

2 Press an ink pack tray to release it, then pull the tray out.

3 Remove and discard the protective piece from the ink pack

tray.

4 Shake an ink pack 10 times, then remove it from the

packaging.

Note: Do not touch the green chip on the ink pack.

5 Move the handle forward, place the ink pack into the ink

pack tray, then move the handle back to its original position.

Note: Make sure the ink pack is fully inserted and level with the top

of the ink pack tray.

Start Here

WF-C5310/WF-C5390/WF-C5810/WF-C5890

6 Insert the ink pack tray into the printer. Repeat steps 2 to

6 for the other ink packs.

Note: The ink packs are keyed to t into the correct color slot.

If you cannot insert the ink pack tray all the way, do not force

it. Make sure the ink pack color matches the color slot on the

printer.

7 Close the ink pack tray cover and lock it.

8 WF-C5310/WF-C5390: Select Installed using the arrow

buttons and press the OK button to start charging the ink.

WF-C5810/WF-C5890: Select OK on the LCD screen to

start charging the ink.

Ink charging takes approximately 9 minutes. A message

appears when ink charging is complete.

Caution: Do not unplug or turn o the product, raise the printer

cover or scanner unit, or open the ink tray cover while the product

is charging or you’ll waste ink.

9 Follow the instructions on the LCD screen to adjust the

print quality.

Note: You need to load paper before you can adjust the print

quality. See “Load paper” for details.

4Load paper

See the online User’s Guide for information about loading

capacity, available paper types and sizes, loading

envelopes, and using the rear paper feed slot or ADF

(WF-C5810/WF-C5890).

1 Make sure the product is done charging the ink, then pull

out the paper cassette.

2 Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User’s

Guide.

Note: This printer is designed for use with Epson® ink packs only, not

third-party ink. For important ink information, visit

http://latin.epson.com/tintaepson or see your printer box.

Important Safety Instructions: When using telephone equipment, you

should always follow basic safety precautions to reduce the risk of fire,

electric shock, and personal injury, including the following:

• Do not use the Epson product near water.

• Always keep this guide handy.

• Avoid using a telephone during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not use a telephone to report a gas leak in the vicinity of the leak.

Caution: To reduce the risk of fire, use only a No. 26 AWG or larger

telecommunication line cord.

The illustrations show the WF-C5890, but the steps are the same

for all models, unless otherwise specied.

Note: Not all products are available in all regions.

1Unpack

WF-C5810/WF-C5890WF-C5310/WF-C5390

Warning: The product is heavy and should be lifted and moved by two

people.

Note: If you purchased an optional paper cassette, see the online

User’s Guide for installation instructions.

1 Remove all protective materials from the product.

Note: Keep the two protective pieces shown after removing

them from inside the product. You will need them if you transport

your product. See the online User’s Guide for transportation

instructions.

2 Lift up the printer cover (WF-C5310/WF-C5390) or scanner

unit (WF-C5810/WF-C5890) and remove all protective

materials from inside the product, then close the printer

cover or scanner unit.

WF-C5810/WF-C5890WF-C5310/WF-C5390

3 Insert the output tray, then set it down gently.

2Turn on and configure

1 Connect the power cord to the back of the product and to

an electrical outlet.

WF-C5310/WF-C5390 WF-C5810/WF-C5890

Caution: Do not connect to your computer yet.

2 Raise the control panel and turn on the product.

Note: If an error code appears, turn o the product and check that

no protective material has been left inside the product.

3 WF-C5310/WF-C5390: Select your language, date, and

time using the arrow buttons and OK button.

WF-C5810/WF-C5890: Select your language, country, date,

and time on the LCD screen.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

3Install ink supply units

(ink packs)

Caution: Keep the ink packs out of the reach of children and do not

drink the ink.

Note: The included initial ink packs are designed for reliable printer setup

and cannot be used as replacement ink packs or resold. After setup, the

remaining ink is available for printing.

1 Unlock and open the ink pack tray cover.

2 Press an ink pack tray to release it, then pull the tray out.

3 Remove and discard the protective piece from the ink pack

tray.

4 Shake an ink pack 10 times, then remove it from the

packaging.

Note: Do not touch the green chip on the ink pack.

5 Move the handle forward, place the ink pack into the ink

pack tray, then move the handle back to its original position.

Note: Make sure the ink pack is fully inserted and level with the top

of the ink pack tray.

Start Here

WF-C5310/WF-C5390/WF-C5810/WF-C5890

Standard software package

1 Make sure the product is NOT CONNECTED to your

computer.

Windows®: If you see a Found New Hardware screen, click Cancel

and disconnect the USB cable.

2 Download and run your product’s software package. For the

latest software, visit http://latin.epson.com/support and

search for your product.

3 Follow the instructions on the computer screen to run the

setup program.

4 When you see the Select Your Connection screen, select

one of the following and follow the on-screen instructions:

• Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup is

unsuccessful, you may need to enter your network name

(SSID) and password.

• Direct USB connection

Make sure you have a USB cable (not included).

• Wired network connection

Make sure you have an Ethernet cable (not included).

PCL or PostScript driver (WF-C5390/WF-C5890)

Download the software from your product’s support page and

see your online User’s Guide for instructions.

Mobile and voice-activated printing

• Print directly from your AndroidTM (v4.4 or later) device*. Simply

connect your printer and device to the same network and tap

the menu icon to select the print option.

• Turn your mobile device into an intuitive, easy-to-use printing

and scanning** control center with Epson Smart Panel®.

Download the app from your mobile device’s app store.

• Print remotely with Epson ConnectTM. See your online

User’s Guide for instructions or learn more at

http://latin.epson.com/connect.

• Use voice-activated assistants to print a variety of creative

and everyday items from your Epson product. Simply add

your product to an Epson Connect account, then link

the account to a voice-activated assistant. See

http://latin.epson.com/support/voice for more information.

* May require the Epson Print Enabler or Mopria Print Service app from Google

PlayTM.

** Scanning is only available on the WF-C5810/WF-C5890.

Any problems?

Network setup was unsuccessful.

• Print a network connection report to identify network problems

and solutions. See your online User’s Guide for instructions.

• Make sure you select the right network name (SSID).

• Restart your router (turn it o and then on), then try to connect

to it again.

3 Insert paper with the glossy or printable side down.

Standard paper:

Thick paper:

Note: Make sure the paper is under the arrow mark for your

paper type and loaded against the front edge of the cassette.

4 Slide the edge guides against the paper, but not too

tightly.

5 Keep the cassette at as you insert it all the way, then pull

out the output tray extension.

6 Select the paper settings on the product’s control panel.

5Connect the fax line

(WF-C5810/WF-C5890)

1 Connect a phone cord to a telephone wall jack and to the

LINE port on your product. See the online User’s Guide for

more information.

2 If prompted, select Proceed on the LCD screen to set up

the fax, or select Close to set it up later.

6Install software

Note:

• An Internet connection is required to obtain the product software.

• To print from a ChromebookTM, go to

http://latin.epson.com/support/chromebookprint for instructions.

Firmware Update Notice: The printer is designed to work only with

genuine Epson branded ink packs. Other brands of ink packs and ink

supplies are not compatible and, even if described as compatible, may

not function properly or at all. Epson periodically provides rmware

updates to address issues of security, performance, minor bug xes

and ensure the printer functions as designed. These updates may aect

the functionality of third-party ink. Non-Epson branded or altered Epson

packs that functioned prior to a rmware update may not continue to

function.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router oers both 2.4 GHz and

5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a rewall alert message, click Unblock or Allow to

let setup continue.

• If your network has security enabled, make sure you enter your

network password (WEP key or WPA passphrase) correctly. Be

sure to enter your password in the correct case.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if there are any gaps in the printout.

Then clean the print head, if necessary. See the online User’s

Guide for more information.

The product’s screen is dark.

Make sure your product is turned on and touch the screen

(WF-C5810/WF-C5890) or press any button to wake it from sleep

mode.

Setup is unable to find my product after connecting it

with a USB cable.

Make sure your product is turned on and the USB cable is

securely connected.

Any questions?

User’s Guide

Windows: Click the icon on your desktop or Apps screen to

access the online User’s Guide.

Mac: Click the icon in Applications/Epson Software/Guide to

access the online User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website,

as described in “Technical support.”

Technical support

Visit http://latin.epson.com/support and search for your

product to download drivers, view manuals, get FAQs, or contact

Epson.

You can also speak to a service technician by calling one of these

numbers:

Argentina (54 11) 5167-0300 Guatemala* 1-800-835-0358

0800-288-37766 Mexico 01-800-087-1080

Bolivia* 800-100-116 Mexico City (52 55) 1323-2052

Chile (56 2) 2484-3400 Nicaragua* 00-1-800-226-0368

Colombia 018000-915235 Panama* 00-800-052-1376

Bogota (57 1) 592-2200 Paraguay 009-800-521-0019

Costa Rica 800-377-6627 Peru 0800-10126

Dominican Lima (51 1) 418-0210

Republic* 1-888-760-0068 Uruguay 00040-5210067

Ecuador* 1-800-000-044 Venezuela (58 212) 240-1111

El Salvador* 800-6570

* Contact your local phone company to call this toll-free number from a mobile

phone.

If your country does not appear on the list, contact your nearest

Epson sales oce. Toll or long distance charges may apply.

Need paper and ink?

Ensure brilliant results with Epson specialty

and plain papers, engineered specically

for Epson printers. You can purchase

them from an Epson authorized reseller.

To nd the nearest one, visit

http://latin.epson.com or contact Epson

as described in “Any questions?” on this

sheet.

WF-C5310/WF-C5390/WF-C5810/WF-C5890

replacement ink packs

Color Standard-

capacity

High-

capacity

Black T11A120-AL T11B120-AL

Cyan T11A220-AL

Magenta T11A320-AL

Yellow T11A420-AL

EPSON, DURABrite, and Epson Smart Panel are registered trademarks, EPSON Exceed Your

Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.

Designed for Excellence is a trademark of Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other

countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Android, Chromebook, and Google Play are trademarks of Google LLC.

General Notice: Other product names used herein are for identication purposes only and may

be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX