Epson XP-8700 Series User manual

Setup Guide
NPD6838-00 EN

Unpacking
A
Remove all protective materials.
B
Close the scanner unit.
Setup Guide
Unpacking
2

!
Caution:
Be careful not to trap your nger or hand when opening or closing the scanner unit; otherwise, you may get
injured.
Setup Guide
Unpacking
3

Turning on the Printer
A
Place the printer on a at and stable surface and then connect the power cable and plug it in.
Note:
Keep the product away from direct sunlight or cooling and heating equipment.
B
Hold down the power button until the lamp turns on and raise the control panel.
Note:
If an error message appears, turn o the printer and check that no protective material has been le inside the printer.
Setup Guide
Turning on the Printer
4

Selecting a Language
A
Select your language. Press or swipe the screen to scroll down.
Setup Guide
Selecting a Language
5

Installing Ink Cartridges
A
Press the menu at the bottom of the screen to continue setting up without using the app.
B
When the instruction to install the ink cartridges is displayed, open the scanner unit.
c
Important:
Do not touch the white cable inside the printer.
C
Remove all ink cartridges from their packages.
Setup Guide
Installing Ink Cartridges
6

c
Important:
❏For the initial setup, make sure you use the ink cartridges that came with this printer. ese cartridges
cannot be saved for later use.
❏Do not touch the sections shown in the illustration of the cartridge.
D
Remove the caps with cap-side up, and then store them in the plastic bag.
E
Insert the ink cartridge diagonally into the cartridge holder and gently push it down until it clicks into place.
Repeat this step to insert all ink cartridges.
c
Important:
Make sure all the cartridges are aligned.
Setup Guide
Installing Ink Cartridges
7

F
Close the scanner unit slowly.
G
Press Installed on the printer screen to start charging the ink.
c
Important:
Do not open the scanner unit or turn o the printer until ink charging is complete.
Note:
❏e screen for adjusting the printer to guarantee print quality is displayed when ink charging is nished.
❏e initial ink cartridges will be partly used to charge the print head. ese cartridges may print fewer pages
compared to subsequent ink cartridges.
Setup Guide
Installing Ink Cartridges
8

Adjusting the Printer to Guarantee Print
Quality
A
Make sure the screen for adjusting the printer to guarantee print quality is displayed on the printer’s screen.
Follow the wizard and perform adjustment until the screen for loading paper is displayed.
B
Open the front cover until it clicks, and then slide out the paper cassette.
Note:
e printer has a lower cassette and an upper cassette. Make sure you pull out the lower cassette.
You can pull out the cassette completely by liing it diagonally upward.
Setup Guide
Adjusting the Printer to Guarantee Print Quality
9

C
Slide the edge guides to their maximum position.
D
Load A4 paper, with the printable side face-down, into the paper cassette until paper hits it’s end.
Setup Guide
Adjusting the Printer to Guarantee Print Quality
10