Epson EB-G5750WU User manual

User’s Guide

Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
q
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix". sp.150
Procedure
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[(Name)] Indicates the name of the buttons on the Remote Control or the Control panel.
Example: [Esc] button
"(Menu Name)"
Brightness (Boldface)
Indicates the configuration menu items.
Example:
Select "Brightness" from the Image menu.
Image menu - Brightness

Notations Used in This Guide ........................ 2
Introduction
ProjectorFeatures .......................................... 8
EaseofUsewhenInstalledonaCeilingMount..........................8
ReliabilityYoucanDependon......................................8
MeetsaWideRangeofNeeds......................................8
EnhancedSecurityFunctions......................................9
EasytoHandle................................................9
MonitoringandControlFunctions ...................................9
TakingFullAdvantageofaNetworkConnection.........................9
PartNamesandFunctions .................................. 10
Front/Top...................................................10
Base...................................................... 11
Rear .......................................................11
Interface...................................................12
ControlPanel................................................13
RemoteControl...............................................14
Installingthebatteries........................................15
Operatingrangeofremotecontrol................................17
Useful Functions
AdjustingtheProjectedImage .............................. 19
DisplayingaTestPattern........................................19
AdjustingthePositionoftheProjectedImage(LensShift)..................20
CorrectingDistortionintheProjectedImage........................... 20
QuickCorner...............................................21
H/V-Keystone..............................................23
Changing the Projected Image . ............................. 25
Automatically Detect Input Signal and Change the Projected Image (Source Search)
..........................................................25
SwitchtotheTargetImagebyRemoteControl.........................26
Changing the Aspect RatiooftheProjectedImage ............ 27
ChangingtheAspectMode.......................................27
Projecting images from video equipment orfromtheHDMIinputport.......27
Projectingimagesfromacomputer ...............................28
SelectingtheProjectionQuality(SelectingColorMode) ....... 29
ProjectingTwoImagesSimultaneously(SplitScreen) ........ 30
InputSourcesforSplitScreenProjection ..............................30
OperatingProcedures..........................................30
Projectingonasplitscreen ..................................... 30
Switchingtheleftandrightscreens...............................31
Switchingtheleftandrightimagesizes............................31
Endingthesplitscreen........................................ 32
RestrictionsduringSplitScreenProjection............................32
Operatingrestrictions........................................32
Restrictionrelatingtoimages ................................... 33
Functions for Enhancing Projection ......................... 34
HidingtheImageandSoundTemporarily(A/VMute).....................34
FreezingtheImage(Freeze)......................................34
PointerFunction(Pointer) ........................................35
EnlargingPartoftheImage(E-Zoom)................................36
Limitation of the Number of the Target Projectors when Using
MultipleProjectors ........................................ 38
SettingtheProjectorID ......................................... 38
CheckingtheProjectorID........................................ 38
SettingtheRemoteControlID.....................................39
Color Correction when Projecting from Multiple Projectors
(Multi-screen Color Adjustment) ............................ 41
SummaryofCorrectionProcedure..................................41
CorrectionMethod............................................41
SavingaUser'sLogo ....................................... 43
SecurityFunctions ......................................... 45
Contents
3

ManagingUsers(PasswordProtect).................................45
TypeofPasswordProtect ......................................45
SettingPasswordProtect ......................................45
EnteringthePassword........................................46
RestrictingOperation(ControlPanelLock)............................47
Anti-TheftLock ...............................................48
Installingthewirelock ........................................48
Anti-theftprojectionlens......................................48
Configuration Menu
Using the Configuration Menu .............................. 50
ImageMenu ............................................... 51
SignalMenu ............................................... 53
SettingsMenu ............................................. 55
ExtendedMenu ............................................ 57
NetworkMenu ............................................ 60
NotesonOperatingtheNetworkMenu..............................61
SoftKeyboardOperations ........................................61
BasicMenu..................................................62
WirelessLANMenu............................................63
SecurityMenu(OnlyavailablewhentheWirelessLANunitisinstalled).........65
WhenWEPisselected........................................66
WhenWPA-PSK(TKIP/AES)orWPA2-PSK(TKIP/AES)isselected.............68
WhenEAP-TLSisselected...................................... 69
EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2, PEAP/MS-CHAPv2, PEAP/GTC, LEAP, EAP-
Fast/MS-CHAPv2,EAP-Fast/GTCisselected..........................70
WiredLANMenu..............................................71
MailMenu..................................................72
OthersMenu .................................................73
ResetMenu.................................................74
Info Menu (Display Only) ................................... 75
ResetMenu ............................................... 76
Troubleshooting
UsingtheHelp ............................................. 78
ProblemSolving ........................................... 80
ReadingtheIndicators.......................................... 80
tIndicatorislitorflashingred ..................................81
moIndicatorisflashingorlit...................................82
WhentheIndicatorsProvideNoHelp ................................84
Problemsrelatingtoimages ....................................85
Problemswhenprojectionstarts.................................89
Otherproblems.............................................90
InterpretingEventIDs........................................92
Maintenance
Cleaning .................................................. 94
CleaningtheProjector'sSurface...................................94
CleaningtheLens.............................................94
CleaningtheAirFilter...........................................94
ReplacingConsumables .................................... 97
ReplacingtheLamp............................................97
Lampreplacementperiod......................................97
Howtoreplacethelamp......................................97
ResettingtheLampHours.....................................100
ReplacingtheAirFilter......................................... 100
Airfilterreplacementperiod................................... 100
Howtoreplacetheairfilter .................................... 100
Notes on Transportation .................................. 102
MovingNearby .............................................. 102
Contents
4

WhenTransporting........................................... 102
Preparingpackaging........................................ 102
Noteswhenpackingandtransporting............................ 102
Monitoring and Controls
EasyMPMonitor .......................................... 104
ChangingSettingsUsingaWebBrowser(WebControl) ...... 105
DisplayingWebControl ........................................ 105
DisplayingWebRemote........................................ 105
Using the Mail Notification Function to Report Problems . . . . . 107
ReadingProblemMailNotificationFunction.......................... 107
ManagementUsingSNMP ................................. 108
ESC/VP21Commands ..................................... 109
SerialConnection ............................................ 109
Communicationsprotocol.......................................109
CommandList...............................................109
AboutPJLink ............................................. 111
About Crestron RoomView® ............................... 112
OperatingaProjectorfromaComputerWindow....................... 112
Displayingtheoperationwindow............................... 112
Usingtheoperationwindow ................................... 113
Usingthetoolswindow...................................... 114
Network Functions
Projectingwith"ConnecttoaNetworkProjector" ........... 117
Making a WPS (Wi-Fi Protected Setup) Connection with a
Wireless LAN Access Point ................................ 118
ConnectionSetupMethod...................................... 118
Making a connection using the push button method . . . . . . . . . . . . . . . . . . 119
MakingaconnectionusingthePINCodeMethod .....................120
Installation and Connections
InstallationMethods ...................................... 124
SwitchingtheProjectionMode................................... 124
Connecting to Video Equipment ........................... 126
ConnectingtoaComputer ...................................... 126
Changingthevideooutputfromalaptopcomputer. .................. 128
ConnectingtoVideoEquipment.................................. 128
Connecting to External Equipment ......................... 131
ConnectingaLANCable........................................ 131
Connectingtoanexternalmonitor .................................131
ConnectingtoExternalSpeakers .................................. 131
InstallingOptionalandSuppliedAccessories ............... 133
RemovingandAttachingtheProjectorLensUnit ....................... 133
Removing ................................................133
Attaching ................................................ 134
InstallingtheWirelessLANUnit(ELPAP03)............................134
Attaching ................................................ 134
ReadingthewirelessLANindicators.............................. 135
AttachingandRemovingtheCableCover ............................ 136
Attaching ................................................ 136
Removing ................................................137
Appendix
Optional Accessories and Consumables .................... 139
Optionalaccessories.......................................... 139
Consumables ............................................... 140
Contents
5

Screen Size and Projection Distance ........................ 141
ProjectionDistance ........................................... 141
SupportedMonitorDisplays ............................... 143
SupportedMonitorDisplays ..................................... 143
Computersignals(analogRGB)................................. 143
ComponentVideo .......................................... 143
CompositeVideo/S-Video..................................... 143
InputsignalsfromDVI-DandHDMIinputport....................... 143
Specifications ............................................ 145
ProjectorGeneralSpecifications ...................................145
Appearance .............................................. 149
Glossary ................................................. 150
GeneralNotes ............................................ 152
AboutNotations ............................................. 152
GeneralNotice.............................................. 152
Index .................................................... 169
Contents
6

Introduction
This chapter explains the projector's features and the part names.

Ease of Use when Installed on a Ceiling Mount
Centered lens
The lens is positioned in the center of the projector so it is well balanced and is easy to
mount on a ceiling. This also makes it easy to line up the screen and the projector.
Equipped with a horizontal and vertical lens shift
Using the lens shift function that allows you to adjust the position of the projected image
along the horizontal and vertical axis opens up a wide variety of installation locations.
sp.20
Five optional lenses are provided
You can select the best lens according to the projection distance and purpose. The
bayonet type allows you to simply and easily exchange and install the optional lenses.
sp.133, p.139
A design that harmonizes with the surrounding environment, and
makes the installation easy
The projector's sophisticated design has a cable cover in which cables are hidden for a
clean exterior appearance.
Easy maintenance
You can replace the lamp by opening the cover on the side of the projector and pulling it
out horizontally.
You can also replace the air filter by simply sliding it out of or into the front of the
projector.
Reliability You can Depend on
A large static electricity filter is used in the air intake system. This reduces
the amount of dust that enters the projector to prevent shutdown caused by
temperature increases even when the projector is permanently mounted to a
ceiling.
Meets a Wide Range of Needs
Equipped with a high-resolution WUXGA panel
You can project a dramatic amount of
information on the screen. Viewers can see
the information at a glance without having
to scroll or switch screens.
Project two images simultaneously (Split Screen)
You can simultaneously project the images
from two video sources lined up on the
screen. This increases the range of
applications, such as when holding a video
conference while projecting presentation
materials. sp.30
Clearly reproduce medical images
A color mode called "DICOM SIM" is provided to project medical images, such as X-ray
photographs. This mode produces image quality that approaches the DICOM
g
standard.
(The projector is not a medical device and cannot be used for medical diagnosis.)
sp.29
Precise color adjustments
Projector Features
8

As well as Color Mode, you can also adjust the image's absolute color temperature and
the strength of each RGB color. Also, because you can adjust the hue, saturation, and
brightness of each RGBCMY, the image can be projected with depth and a color
matching in superior detail.
Enhanced Security Functions
Password Protect to restrict and manage users
By setting a password you can restrict who can use the projector. sp.45
Control Panel lock restricts button operation on the control panel.
You can use this to prevent people changing projector settings without permission at
events, in schools, and so on. sp.47
Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security devices.
sp.48
•Security slot
•Security cable installation point
•Screw to fix the lens unit removal button
Easy to Handle
Direct power On/Off
In places where power is managed centrally, such as in a conference room, the projector
can be set to power on and off automatically when the power source to which the
projector is connected is switched on or off.
No cool down delay
After turning the projector's power off, you can disconnect the projector's power cable
without having to wait for the projector to cool down.
Monitoring and Control Functions
A selection of monitoring and control protocols is supported, such as the
Epson EasyMP Monitor application software. This allows you to use the
projector according to your system environment. s"Monitoring and
Controls" p.103
Taking Full Advantage of a Network Connection
Simultaneously project four images for dynamic conferences
By using the supplied EasyMP Multi PC Projection applications software, the images
from up to four computers that are connected to the network can be simultaneously
displayed. Anyone can freely and easily project images from connected computers to
make conferences and meetings more lively. sEasyMP Multi PC Projection Operation
Guide
Transferring images and audio using the network
The supplied EasyMP Network Projection applications software can be used to connect
to network computers and transfer video, audio, and movies. Using a variety of transfer
functions increases presentation possibilities. sEasyMP Network Projection
Operation Guide
Project using "Connect to a Network Projector"
By connecting the projector to a network and using the Network Projector function in
Windows Vista or Windows 7, multiple users on the network can share the projector.
sp.117
Quick wireless connections to easily connect to the network
Network computers can be easily connected to the projector simply by connecting an
optional Quick Wireless Connection USB Key. (This function is supported only for
Windows computers.) sp.139
Projector Features
9

Front/Top
The illustration shows the projector with a standard zoom lens installed.
Name Function
ALamp cover Open this cover when replacing the projector's lamp.
sp.97
BAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent
while projection is in progress.
Name Function
CFront adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
sQuick Start Guide
DFoot adjust lever Pull out the foot lever to extend and retract the front foot.
sQuick Start Guide
EZoom ring Adjusts the image size. sQuick Start Guide
FProjection lens Images are projected through here.
GLens unit removal
button
Press this button to remove the lens unit when replacing
lens units. sp.133
HRemote receiver Receives signals from the remote control. sp.17
IFocus ring Adjusts the image focus. sQuick Start Guide
JAir filter tab When cleaning or replacing the air filter, use this tab to
pull out the air filter. sp.94, p.100
KStatus indicators The color of the indicators and whether they are flashing
or lit indicate the status of the projector. sp.80
LWireless LAN indicator This indicator shows the status of network access when the
Wireless LAN unit is installed. sp.135
MAir intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly. sp.94
NVertical lens shift dial Turn the dial to move the position of the projected image
up or down. sp.20
OHorizontal lens shift
dial
Turn the dial to move the position of the projected image
left or right. sp.20
Part Names and Functions
10

Base
Name Function
ACeiling mount fixing
points
(4 points)
Attach the optional ceiling mount here when suspending
the projector from a ceiling. sp.139, p.124
BScrew holes to fix the
cable cover
Holes for screws to fix the cable cover in place.
sp.136
CScrew hole to fix
Wireless LAN unit
When installing the Wireless LAN unit, use this screw hole
to fix the unit in place to avoid loss and so on. sp.134
DRear foot When setup on a desk, turn to extend and retract to adjust
the horizontal tilt. sQuick Start Guide
Name Function
ESecurity cable
installation point
Pass a commercially available anti-theft wire lock through
here when you want to secure the projector to a fixed
object. sp.48
FHandle Use these handles when carrying the projector.
GScrew hole for the
screw to fix the lens
unit removal button
When installing a lens unit, use this screw hole to fix the
lens unit removal button using the screw supplied.
sp.48
Rear
Name Function
AWireless LAN unit
installation section
Install the Wireless LAN unit here. Remove the cover
when installing. s"Installing the Wireless LAN Unit
(ELPAP03)" p.134
BControl Panel s"Control Panel" p.13
CInterface s"Interface" p.12
DPower inlet Connects to the power cable. sQuick Start Guide
ESpeaker
Part Names and Functions
11

Interface
Name Function
AMonitor Out port Outputs to an external monitor the analog RGB signal
from the computer connected to the Computer1 input
port or BNC input port. The signals that are input from
other ports and component video signals cannot be
output.
BAudio Out port Outputs the sound of the image currently being projected
to external speakers.
CAudio3 input port Connects to the audio out port of the device that is
connected to the BNC input port.
DAudio1 input port Connects to the audio out port of the device that is
connected to the Computer1 input port.
Name Function
ERS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s"ESC/VP21 Commands" p.109
FBNC input port For analog RGB signals from a computer and component
video signals from other video sources.
GVideo1 input port For composite video signals from video sources.
HComputer1 input port For analog RGB signals from a computer and component
video signals from other video sources.
IVideo2 input port For composite video signals from video sources.
JAudio4 input port Connects to the audio out port when you want to output
audio from the projector from equipment connected to
the S-Video input port, Video1 input port, or Video2
input port.
KUSB(TypeA) port Connects a USB storage device or a digital camera, and
projects image/movie files and scenarios. sPC Free
Operation Guide
LUSB indicator The following explains the status of USB devices
connected to USB(TypeA) port.
OFF: USB device is not connected
Orange Light ON: USB device is connected
Green Light ON: USB device is operating
Red Light ON: Error
MLAN port Connects a LAN cable to connect to a network.
NRemote port Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into this remote port, the remote receiver
on the projector is disabled.
OHDMI input port Inputs video signals from HDMI
™
compatible video
equipment and computers. This projector is compatible
with HDCP
g signals.
PS-Video input port For S-video signals from video sources.
Part Names and Functions
12

Name Function
QDVI-D input port Inputs digital RGB signals from a computer connected to
the DVI-D ouput port. This projector is compatible with
HDCP g signals.
RAudio2 input port Connects to the audio out port of the device that is
connected to the DVI-D input port.
Control Panel
Name Function
A[t] button Turns the projector power On or Off. sQuick Start
Guide
B[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. sp.25
Name Function
C[Enter] button If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. sp.50
D[w/][v/ ]
button
Corrects vertical keystone distortion. sp.23
If pressed while the configuration menu or a Help screen is
displayed, these buttons only have the [ ] and [ ]
functions which select menu items and setting values.
sp.50
When projecting using PC Free or Connect to a Network
Projector, these buttons function only as [ ] and [ ]
buttons.
E[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur. sp.78
F[Esc] button Stops the current function.
If pressed when the configuration menu is displayed, it
moves to the previous menu level. sp.50
G[</][>/] button Corrects horizontal keystone distortion. sp.23
If pressed while the configuration menu or a Help screen is
displayed, these buttons only have the [ ] and [ ]
functions which select menu items and setting values.
sp.50
When projecting using PC Free or Connect to a Network
Projector, these buttons function only as [ ] and [ ]
buttons.
H[Menu] button Displays and closes the configuration menu.
sp.49
Part Names and Functions
13

Remote Control Name Function
A[t] button Turns the projector power On or Off. sQuick Start
Guide
B[Comp1/2] button Changes to images from the Computer1 input port.
C[BNC] button Changes to images from the BNC input port.
D[Video1/2] button Each time the button is pressed, the image displayed
changes between Video1 input port and Video2 input
port.
E[S-Video] button Changes to images from the S-video input port.
F[Menu] button Displays and closes the configuration menu. sp.49
G[h] button When the configuration menu or Help screen is displayed,
it selects menu items and setting values. sp.50,
p.78
When using the optional wireless mouse receiver, the
pointer moves in the direction (eight possible directions)
that the button is pressed.
H[Enter] button When the configuration menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. sp.50, p.78
Acts as a mouse's left button when using the optional
wireless mouse receiver.
I[Page] buttons
[[][]]
These buttons can be used to page up and down when
projecting an image from a computer that is connected to
the projector through the network. These buttons can be
used to switch the screen when projecting with PC Free.
These buttons can be used to page up and down when
using the optional wireless mouse receiver.
J[A/V Mute] button Turns the video and audio on or off. sp.34
K[Split] button Press this button to split the screen in two and project two
images simultaneously. sp.30
L[Auto] button If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
Part Names and Functions
14

Name Function
M[Aspect] button The Aspect Ratio
g changes each time the button is
pressed. sp.27
N[ID] button Press to set the remote control ID. sp.39
O[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur. sp.78
PRemote port Connects the optional remote control cable set and
outputs signals from the remote control.
When the remote control cable is plugged into this remote
port, the remote receiver is disabled.
Q[Volume] button
[][ ]
[] Decreases the volume. [ ] Increases the volume.
sQuick Start Guide
Caution
Do not start when the volume is set too high.
Loud sounds may cause loss of hearing. Always low-
er the volume before turning off the projector. Grad-
ually increase the volume after turning on the pro-
jector.
R[Num] button Use this button to enter passwords, IP Address from the
Network, and so on.
SNumeric buttons Use this button to enter passwords, remote control ID
settings, IP Address from the Network, and so on.
T[Color Mode] button Each time the button is pressed, the Color Mode changes.
sp.29
U[Freeze] button Images are paused or unpaused. sp.34
V[E-Zoom] buttons
[z][x]
The [z] button enlarges the image without changing the
projection size.
The [x] button reduces the parts of images that have been
enlarged using the [z] button. sp.36
W[Pointer] button Press to activate the on screen pointer. sp.35
Name Function
X[Esc] button Stops the current function. If pressed when the
configuration menu is displayed, it moves to the previous
menu level. sp.50
Acts as a mouse's right button when using the optional
wireless mouse receiver.
Y[User] button Press to assign a frequently used item from the six
available configuration menu items. By pressing the
button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch
settings/adjustments. sp.55
Test Pattern is assigned as the default setting.
Z[LAN/USB] button Each time you press this button, the image is switched
between the image from a computer that is connected to
the projector through the network and the image from the
USB device that is connected to the USB(TypeA) port.
aID switch Use this switch to enable (On)/disable (Off) ID settings for
the remote control. sp.38
b[DVI-D/HDMI] button Each time the button is pressed, the image displayed
changes between DVI-D input port and the HDMI input
port.
c[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. sp.25
dIndicators A light is emitted when outputting remote control signals.
eRemote control light-
emitting area
Outputs remote control signals.
Installing the batteries
The batteries are not set in the remote control when it is sold. Set the
supplied batteries (two, AA alkaline batteries) to use the remote control.
Part Names and Functions
15

Attention
Make sure you read the Safety Instructions before handling the batteries. s
Safety Instructions
Procedure
A
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
B Insert the batteries in the correct direction.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to ensure
the batteries are inserted the correct way.
C Replace the battery cover.
Press the battery compartment cover until it clicks into place.
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size alkaline batteries ready. You cannot use other
batteries except for the AA size alkaline.
Part Names and Functions
16

Operating range of remote control
When using the remote control, point the remote control light-emitting
area at the remote receiver on the projector. The operating range of the
remote control that is provided with the projector is shown below.
Horizontal operating range
Vertical operating range
q
•To restrict reception of the operation signals from the remote
control, set the Remote Receiver on the Set menu. sp.55
•When using a remote control provided with other Epson projectors,
set the Remote Control Type on the Extended menu. sp.57
The operating range will depend on the remote control that you
use.
Part Names and Functions
17

Useful Functions
This chapter explains useful tips for giving presentations, and the security functions.

Displaying a Test Pattern
A test pattern can be displayed to adjust the projection status without
connecting video equipment. This is useful when installing a projector.
q
If the [User] button on the remote control is set to Test Pattern, the
test pattern will be displayed when the [User] button is pressed. (The
default setting is Test Pattern.)
Procedure
A Press the [Menu] button while the projector is projecting.
Select Settings - "Test Pattern", then press the [Enter] button.
Using the Remote Control Using the Control panel
B Press the [h] button on the remote control in the [r] direction
or press the [Enter] button on the control panel to switch the
test pattern.
To display the previous image, press the [h] button on the remote
control in the [l] direction.
Using the Remote Control Using the Control panel
The following adjustments can be made while the test pattern is being
displayed.
•Zoom and focus adjustment sQuick Start Guide
•Projected image position adjustment sp.20
•Projected image keystone correction sp.20
•Selecting the projection quality (Selecting Color Mode) sp.29
•Brightness adjustment sImage menu - Brightness p.51
•Sharpness adjustment (Standard only) sImage menu - Sharpness
p.51
•Color temperature adjustment sImage menu - Abs. Color Temp.
p.51
•Color adjustment sImage menu - Color Adjustment p.51
Adjusting the Projected Image
19

q
To set menu items that cannot be set while the test pattern is being
displayed or to fine-tune the projected image, project an image from
the connected device.
C Press the [Esc] button to end the test pattern.
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
Procedure
Turn the vertical lens shift dial or horizontal lens shift dial on the
projector to adjust the location of the projected image.
q
The image will be clearest when both the vertical and horizontal lens
shift dials are set in the center.
The ranges within which the image can be moved using the lens shift dials
are shown below.
ACenter of lens
BProjected image when lens shift dials are set in the center
Correcting Distortion in the Projected Image
There are two methods of correcting distortion in projected images as
below.
•Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately. s"Quick Corner" p.21
We recommend using Quick Corner to accurately adjust keystone
distortion.
Adjusting the Projected Image
20