Epson EF11 Specification sheet

Quick Setup
Before using the projector, make sure you read these instructions and the safety
instructions in the online User’s Guide.
Contents
Make sure your projector box includes all of these parts:
You can place the projector on almost any flat surface or attach it to a tripod or
other hardware with an optional mount. See the online User’s Guide for more
information.
Connect the projector
Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI
cable to the projector’s HDMI port and the other end to an HDMI port on
your video device or computer. You can also connect a streaming stick. See the
online User’s Guide for details.
Caution: Do not turn on the video source before connecting it to the projector;
you may damage the projector.
HDMI cable
USB device
You can connect a supported digital camera, USB flash drive, or USB storage
device to the projector’s USB-A port, and then use the projector’s PC Free
feature. See the online User’s Guide for details.
USB cable
Screen mirroring
You can use Miracast®to send images to your projector from supported
smartphones, tablets, and laptops. See the online User’s Guide for details.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
connected by an HDMI cable.
Headphones
You can connect the projector to headphones through the audio out port.
Note: Connecting headphones disables the projector’s internal speaker. If you
do not hear sound from an HDMI source, set the connected device to PCM
output.
Turn on your equipment
1 Turn on your computer or video source.
2 Plug in the projector.
3 Press the power button on the projector or the remote control. The
status light flashes blue and then stays on.
4 Press the Enter button on the remote control to scroll through the
Welcome Guide.
5 The default language of the menu system is English. To select another
language, press the menu button on the remote control. Select
Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the menu button to exit the
menu system.
Note: To shut down the projector, press the power button twice.
Adjust the image
1 To reduce or enlarge the image, press the menu button on the
remote control. Select Settings and press Enter. Select Installation,
select Zoom, and press Enter. Press the left or right arrow buttons on
the remote control to adjust the image size, then press Enter. Press the
menu button to exit the menu system.
2 To adjust the image height, press and hold the foot release lever on the
bottom of the projector to extend the front adjustable foot. Release the
lever to lock the foot in the desired position.
3 Move the focus lever on top of the projector left or right to adjust the
image sharpness.
4 If your image looks like or , you may have placed the projector off
to one side of the screen at an angle. Place the projector directly in front
of the center of the screen, facing the screen squarely. If you can’t move
the projector, use the button on the remote control to correct the
image shape.
5 Your projector automatically adjusts an image that looks like or ,
but if necessary you can press the button on the remote control to
correct it.
Note: For more adjustment methods, see the online User’s Guide.
Using the remote control
Install two AAA batteries as shown below.
Access projector menus
Turn projector
on or off
Enter a selection
Adjust image shape
(keystone)
Choose which source to
display
Control playback of
connected device
Go back to previous
function
Navigate menus
Turn volume up
or down
Turn off audio and
video temporarily
Troubleshooting
• If you see a blank screen, check the following:
• Make sure your computer or video device is properly connected.
• Make sure the status light on the projector is blue and not flashing.
• Press the power button or the button on the projector or
remote control to wake the projector from standby or sleep mode,
if necessary.
• If you see a blank screen when a computer is connected, check the
following:
• On some Windows®laptops, you may need to hold down the Fn key
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as .
On Windows 7 or later, hold down the Windows key and press Pat
the same time, then click Duplicate.
• If you’re using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries, if necessary.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Where to get help
Manual
For more information about using the projector, you can view or download the
online manual from the Epson website, as described below.
Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)
and search for your product to download software and utilities, view the
manual, get FAQs and troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson®PrivateLine®Support service, call [phone]. This service
is available for the duration of your warranty period. You may also speak with a
support specialist by calling [phone] (U.S.) or [phone] (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday,
and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are
subject to change without notice. Toll or long distance charges may apply.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized reseller.
To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can
purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca
(Canadian sales).
EF11

Quick Setup
Before using the projector, make sure you read these instructions and the safety
instructions in the online User’s Guide.
Contents
Make sure your projector box includes all of these parts:
You can place the projector on almost any flat surface or attach it to a tripod or
other hardware with an optional mount. See the online User’s Guide for more
information.
Connect the projector
Video device or computer
You can connect video equipment or a computer. Connect one end of an HDMI
cable to the projector’s HDMI port and the other end to an HDMI port on
your video device or computer. You can also connect a streaming stick. See the
online User’s Guide for details.
Caution: Do not turn on the video source before connecting it to the projector;
you may damage the projector.
HDMI cable
USB device
You can connect a supported digital camera, USB flash drive, or USB storage
device to the projector’s USB-A port, and then use the projector’s PC Free
feature. See the online User’s Guide for details.
USB cable
Screen mirroring
You can use Miracast®to send images to your projector from supported
smartphones, tablets, and laptops. See the online User’s Guide for details.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
connected by an HDMI cable.
Headphones
You can connect the projector to headphones through the audio out port.
Note: Connecting headphones disables the projector’s internal speaker. If you
do not hear sound from an HDMI source, set the connected device to PCM
output.
Turn on your equipment
1 Turn on your computer or video source.
2 Plug in the projector.
3 Press the power button on the projector or the remote control. The
status light flashes blue and then stays on.
4 Press the Enter button on the remote control to scroll through the
Welcome Guide.
5 The default language of the menu system is English. To select another
language, press the menu button on the remote control. Select
Settings and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the menu button to exit the
menu system.
Note: To shut down the projector, press the power button twice.
Adjust the image
1 To reduce or enlarge the image, press the menu button on the
remote control. Select Settings and press Enter. Select Installation,
select Zoom, and press Enter. Press the left or right arrow buttons on
the remote control to adjust the image size, then press Enter. Press the
menu button to exit the menu system.
2 To adjust the image height, press and hold the foot release lever on the
bottom of the projector to extend the front adjustable foot. Release the
lever to lock the foot in the desired position.
3 Move the focus lever on top of the projector left or right to adjust the
image sharpness.
4 If your image looks like or , you may have placed the projector off
to one side of the screen at an angle. Place the projector directly in front
of the center of the screen, facing the screen squarely. If you can’t move
the projector, use the button on the remote control to correct the
image shape.
5 Your projector automatically adjusts an image that looks like or ,
but if necessary you can press the button on the remote control to
correct it.
Note: For more adjustment methods, see the online User’s Guide.
Using the remote control
Install two AAA batteries as shown below.
Access projector menus
Turn projector
on or off
Enter a selection
Adjust image shape
(keystone)
Choose which source to
display
Control playback of
connected device
Go back to previous
function
Navigate menus
Turn volume up
or down
Turn off audio and
video temporarily
Troubleshooting
• If you see a blank screen, check the following:
• Make sure your computer or video device is properly connected.
• Make sure the status light on the projector is blue and not flashing.
• Press the power button or the button on the projector or
remote control to wake the projector from standby or sleep mode,
if necessary.
• If you see a blank screen when a computer is connected, check the
following:
• On some Windows®laptops, you may need to hold down the Fn key
and press F7 or the function key that lets you display on an external
monitor. It may be labeled CRT/LCD or have an icon such as .
On Windows 7 or later, hold down the Windows key and press Pat
the same time, then click Duplicate.
• If you’re using a Mac laptop, open System Preferences and
select Displays. Click the Arrangement tab and select the Mirror
Displays checkbox.
•If the projector does not respond to remote control commands, make sure
the batteries in the remote control are installed correctly. Replace the
batteries, if necessary.
Registration
Register today to get product updates and exclusive offers. You can register
online at www.epson.com/webreg.
Where to get help
Manual
For more information about using the projector, you can view or download the
online manual from the Epson website, as described below.
Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada)
and search for your product to download software and utilities, view the
manual, get FAQs and troubleshooting advice, or contact Epson.
Telephone support services
To use the Epson®PrivateLine®Support service, call [phone]. This service
is available for the duration of your warranty period. You may also speak with a
support specialist by calling [phone] (U.S.) or [phone] (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday,
and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are
subject to change without notice. Toll or long distance charges may apply.
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase screens or other accessories from an Epson authorized reseller.
To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can
purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca
(Canadian sales).
EF11

15. Any damage caused by using improper packaging materials or improper
packaging and shipping when returning a product for repair or replacement. You
will be invoiced for such shipping damage to product.
This warranty is not transferable. Epson is not responsible for your data or
applications, which cannot be restored and should be backed up by you. Postage,
insurance, or shipping costs incurred in presenting your Epson product for carry-in
warranty service are your responsibility. If a claimed defect cannot be identified or
reproduced in service, you will be held responsible for costs incurred.
D. DISCLAIMER OF WARRANTIES: EPSON’S SOLE AND EXCLUSIVE LIABILITY AND
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY SHALL BE LIMITED TO
EITHER, AT EPSON’S OPTION, REPAIR OR REPLACEMENT AS SET FORTH ABOVE. THE
WARRANTY AND REMEDY PROVIDED ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES
ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN,
ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM
ARE VOID. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED
WARRANTIES LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
E. EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON
OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OR ANY LOST PROFITS, COST OF SUBSTITUTE EQUIPMENT, DOWNTIME,
CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, OR INJURY TO PROPERTY,
RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER
RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO
EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN
EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT. SOME STATES
DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
F. Disputes, Arbitration, Governing Laws:
1. Both you and Epson agree that any controversy or claim arising out of or
relating to Epson products or services or this agreement, shall be resolved by
arbitration on an individual, non-class, non-representative basis, rather than in
court. The arbitration shall be governed by the rules of JAMS that are in effect
when the arbitration is filed, excluding any rules that permit arbitration on a
class or representative basis and under the rules set forth in this agreement.
The arbitrator, and not any federal, state, or local court or agency shall have
the exclusive authority to resolve any dispute relating to the interpretation,
applicability, enforceability, or formation, including but not limited to, any claim
that all or any part is void or voidable. JAMS rules are available at
http://www.jamsadr.com or by calling 1-800-352-5267. Disputes shall be resolved
by a single neutral arbitrator, and both parties shall have a reasonable opportunity
to participate in the selection of the arbitrator. If you wish, you may appear at the
arbitration by phone. The arbitrator is bound by the terms of this agreement.
2. Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you
agree to try, for sixty (60) days, to resolve any dispute informally by contacting
us at customer[email protected]. Please include your name, address and
contact information, the facts giving rise to the dispute, and the relief requested.
You agree to act in good faith to resolve the dispute, but if you and Epson do not
reach a resolution within the sixty (60) days, you may commence an arbitration.
3. Opt-out. You may elect to opt-out (exclude yourself) from the final, binding,
individual arbitration procedure and waiver of class and representative
proceedings specified in this agreement by sending a written letter to Epson
America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way, Long Beach,
CA 90806 (effective August 2020: 3131 Katella Ave., Los Alamitos, CA 90720),
within thirty (30) days of your purchase of the Epson products and/or services
that specifies (i) your name, (ii) your mailing address, and (iii) your request to be
excluded from the final, binding, individual arbitration procedure and waiver of
class and representative proceedings specified in this Section F. In the event that
you opt-out consistent with the procedure set forth above, all other terms shall
continue to apply, including the requirement to provide notice prior to litigation.
4. There is no judge or jury in arbitration and your grounds for appeal are limited,
however, the arbitrator is empowered to grant relief and award you the same
damages as a court could, including declaratory or injunctive relief. Judgment on
the arbitration may be entered in any court having jurisdiction.
5. Notwithstanding the foregoing, you may bring an individual action in a small
claims court of your state or municipality if the action is within that court’s
jurisdiction and is pending only in that court.
6. Notwithstanding the foregoing, we also both agree that you or we may bring
suit in court to enjoin infringement or other misuse of trademark, patent
infringement, copyright, or trade secret.
7. Any action must be brought within one (1) year of the expiration of the warranty.
8. If any provision in this Section F is found to be unenforceable, that provision
shall be severed with the remainder of this agreement remaining in full force
and effect. The foregoing shall not apply to the prohibition against class or
representative actions. This means that if Section 9 (below) is found to be
unenforceable, the entire Section 9 (but only Section 9) shall be null and void.
9. We each agree that any dispute resolution proceedings will be conducted only on
an individual basis and not in a class, consolidated, or representative action.
10. This Section F is governed by the Federal Arbitration Act.
Notices
Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers.
We: Epson America, Inc.
Located at: 3131 Katella Ave, Los Alamitos, CA 90720
Telephone: [phone]
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: LCD Projector
Model: HA23A
Marketing Name: EF11
Options: Product name Model
Remote controller 2208327 xx (x=0-9)
Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B external switching power supplies
We: Epson America, Inc.
Located at: 3131 Katella Avenue, Los Alamitos, CA 90720
Telephone [phone]
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: AC Adapter
Model: AD10370LF
Wireless LAN Safety and Specifications
Contains wireless LAN module model: WLU5000-D101(RoHS)
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is then passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinues transmission in
case of either absence of information to transmit or operational failure.
This equipment should be installed and operated with a distance of at least 7.9 inches
(20 cm) between the radiator and your body.
This equipment is restricted to indoor operation only.
U.S. FCC Notices
Contains FCC ID: BKMAE-WLU5000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Miracast is a registered trademark of Wi-Fi Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2020 Epson America, Inc., 7/20
Printed in XXXXXX CPD-59702
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers
and / or peripherals in order to meet FCC emission limits.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines.
Industry Canada (IC) Notices
Contains IC: 1052D-WLU5000
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause interference; and (2) This
device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Epson America, Inc. Limited Warranty
Two-Year or 12,000-hour Projector Limited Warranty
A. What Is Covered: Epson America, Inc. (“Epson”) warrants to the purchaser of the
Epson product enclosed with this limited warranty statement that the product, if
purchased and operated in the United States, Canada, or Puerto Rico, will be free
from defects in workmanship and materials for a period of two (2) years from the
date of original purchase or 12,000 hours of use, whichever occurs first.
B. What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number at the end of this statement
and be prepared to provide the model, serial number, and, if required, date of
original purchase. This line will be answered during Epson’s regular support hours
(currently 6:00 am to 8:00 pm, Pacific Time, Monday through Friday, and 7:00 am to
4:00 pm on Saturday — subject to change). You may also need to provide proof of
purchase if warranty coverage cannot be verified by the serial number. If Epson
confirms warranty service is required, Epson will, at its option, exchange or repair
the product without charge for parts or labor. If Epson authorizes an exchange for
the defective unit, Epson will ship a replacement product to you, freight prepaid,
as long as you use an address in the United States, Canada, or Puerto Rico. The
replacement product may be new or refurbished to the Epson standard of quality.
(The replacement product may not include promotional materials, accessories,
documentation, manuals, software, or cables.) You are responsible for securely
packaging the defective unit and returning it to Epson within five (5) working days
of receipt of the replacement. Epson requires a debit or credit card number to secure
the cost of the replacement product in the event that you fail to return the defective
one. If Epson authorizes repair instead of exchange, Epson will direct you to send your
product to Epson or its authorized service center, where the product will be repaired
and sent back to you. You are responsible for securely packaging the product and
for all postage or shipping costs to and from the Epson authorized service center.
When warranty service involves the exchange of the product or of a part, the item
replaced becomes Epson’s property. If service cannot be provided on the product for
any reason and Epson no longer sells the same model, Epson will replace your product
with a model of equal or superior value. Replacement products or parts assume the
remaining warranty period of the original product covered by this limited warranty
and are subject to its 12,000-hour use limitation.
C. What This Warranty Does Not Cover:
1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters
such as fire, flood, or lightning; or improper electrical currents, software, or
interaction with non-Epson products
2. Any damage caused by or any service for third-party software, applications, parts,
components, or peripheral devices added to the product after its shipment from
Epson, such as dealer- or user-added boards, components, or cables
3. Any damage caused by installing the product next to a heat source or directly in
the path of an air vent or an air conditioner
4. Damage due to excessive, continual usage
5. Damage caused by failure to properly maintain the product (see your online User’s
Guide for details)
6. Service when the product is used outside the U.S., Canada, or Puerto Rico
7. Warranty service if the product label, logo, rating label, or serial number has been
removed
8. Consumables such as filters or any items that are identified as being replaceable
by the user in the product documentation (see your online User’s Guide for details)
9. Loss of data
10. Installation or removal
11. Any damage from service performed by anyone other than an Epson Authorized
Servicer
12. Damage resulting from operation or storage in areas with smoke, oil, high
humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock
13. Cosmetic damage caused by handling or normal wear and tear during use
14. Any product or parts purchased as used, refurbished, or reconditioned
G. Other Provisions:
1. Other Rights You May Have: This warranty gives you specific legal rights, and
you may also have other rights which vary from jurisdiction to jurisdiction. Some
jurisdictions do not allow limitations on how long an implied warranty lasts, or
allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
2. Warranties in Canada: In Canada, warranties include both warranties and
conditions.
3. Governing Law: Except for any claims subject to arbitration pursuant to Section F,
you and Epson agree that the law of the state where you reside shall govern.
4. Venue: Except for claims subject to arbitration pursuant to Section F, in the event
of a dispute you and Epson both consent to the jurisdiction of your state of
residence or, if none, then of the courts in Los Angeles County, California.
To find the Epson Authorized Reseller nearest you, please visit www.epson.com in the
U.S. or www.epson.ca in Canada.
To find the Epson Customer Care Center nearest you, please visit
www.epson.com/servicecenterlocator in the U.S. or www.epson.ca/servicecenterlocator
in Canada.
To contact the Epson ConnectionSM, please call [phone] or [phone] in the
U.S. and [phone] in Canada.

15. Any damage caused by using improper packaging materials or improper
packaging and shipping when returning a product for repair or replacement. You
will be invoiced for such shipping damage to product.
This warranty is not transferable. Epson is not responsible for your data or
applications, which cannot be restored and should be backed up by you. Postage,
insurance, or shipping costs incurred in presenting your Epson product for carry-in
warranty service are your responsibility. If a claimed defect cannot be identified or
reproduced in service, you will be held responsible for costs incurred.
D. DISCLAIMER OF WARRANTIES: EPSON’S SOLE AND EXCLUSIVE LIABILITY AND
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY SHALL BE LIMITED TO
EITHER, AT EPSON’S OPTION, REPAIR OR REPLACEMENT AS SET FORTH ABOVE. THE
WARRANTY AND REMEDY PROVIDED ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES
ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN,
ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM
ARE VOID. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED
WARRANTIES LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
E. EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON
OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OR ANY LOST PROFITS, COST OF SUBSTITUTE EQUIPMENT, DOWNTIME,
CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, OR INJURY TO PROPERTY,
RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER
RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO
EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN
EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT. SOME STATES
DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
F. Disputes, Arbitration, Governing Laws:
1. Both you and Epson agree that any controversy or claim arising out of or
relating to Epson products or services or this agreement, shall be resolved by
arbitration on an individual, non-class, non-representative basis, rather than in
court. The arbitration shall be governed by the rules of JAMS that are in effect
when the arbitration is filed, excluding any rules that permit arbitration on a
class or representative basis and under the rules set forth in this agreement.
The arbitrator, and not any federal, state, or local court or agency shall have
the exclusive authority to resolve any dispute relating to the interpretation,
applicability, enforceability, or formation, including but not limited to, any claim
that all or any part is void or voidable. JAMS rules are available at
http://www.jamsadr.com or by calling 1-800-352-5267. Disputes shall be resolved
by a single neutral arbitrator, and both parties shall have a reasonable opportunity
to participate in the selection of the arbitrator. If you wish, you may appear at the
arbitration by phone. The arbitrator is bound by the terms of this agreement.
2. Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you
agree to try, for sixty (60) days, to resolve any dispute informally by contacting
us at customer[email protected]. Please include your name, address and
contact information, the facts giving rise to the dispute, and the relief requested.
You agree to act in good faith to resolve the dispute, but if you and Epson do not
reach a resolution within the sixty (60) days, you may commence an arbitration.
3. Opt-out. You may elect to opt-out (exclude yourself) from the final, binding,
individual arbitration procedure and waiver of class and representative
proceedings specified in this agreement by sending a written letter to Epson
America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way, Long Beach,
CA 90806 (effective August 2020: 3131 Katella Ave., Los Alamitos, CA 90720),
within thirty (30) days of your purchase of the Epson products and/or services
that specifies (i) your name, (ii) your mailing address, and (iii) your request to be
excluded from the final, binding, individual arbitration procedure and waiver of
class and representative proceedings specified in this Section F. In the event that
you opt-out consistent with the procedure set forth above, all other terms shall
continue to apply, including the requirement to provide notice prior to litigation.
4. There is no judge or jury in arbitration and your grounds for appeal are limited,
however, the arbitrator is empowered to grant relief and award you the same
damages as a court could, including declaratory or injunctive relief. Judgment on
the arbitration may be entered in any court having jurisdiction.
5. Notwithstanding the foregoing, you may bring an individual action in a small
claims court of your state or municipality if the action is within that court’s
jurisdiction and is pending only in that court.
6. Notwithstanding the foregoing, we also both agree that you or we may bring
suit in court to enjoin infringement or other misuse of trademark, patent
infringement, copyright, or trade secret.
7. Any action must be brought within one (1) year of the expiration of the warranty.
8. If any provision in this Section F is found to be unenforceable, that provision
shall be severed with the remainder of this agreement remaining in full force
and effect. The foregoing shall not apply to the prohibition against class or
representative actions. This means that if Section 9 (below) is found to be
unenforceable, the entire Section 9 (but only Section 9) shall be null and void.
9. We each agree that any dispute resolution proceedings will be conducted only on
an individual basis and not in a class, consolidated, or representative action.
10. This Section F is governed by the Federal Arbitration Act.
Notices
Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers.
We: Epson America, Inc.
Located at: 3131 Katella Ave, Los Alamitos, CA 90720
Telephone: [phone]
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: LCD Projector
Model: HA23A
Marketing Name: EF11
Options: Product name Model
Remote controller 2208327 xx (x=0-9)
Supplier’s Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B external switching power supplies
We: Epson America, Inc.
Located at: 3131 Katella Avenue, Los Alamitos, CA 90720
Telephone [phone]
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR 2.906. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: AC Adapter
Model: AD10370LF
Wireless LAN Safety and Specifications
Contains wireless LAN module model: WLU5000-D101(RoHS)
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is then passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinues transmission in
case of either absence of information to transmit or operational failure.
This equipment should be installed and operated with a distance of at least 7.9 inches
(20 cm) between the radiator and your body.
This equipment is restricted to indoor operation only.
U.S. FCC Notices
Contains FCC ID: BKMAE-WLU5000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Miracast is a registered trademark of Wi-Fi Alliance.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2020 Epson America, Inc., 7/20
Printed in XXXXXX CPD-59702
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Properly shielded
and grounded cables and connectors must be used for connection to host computers
and / or peripherals in order to meet FCC emission limits.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines.
Industry Canada (IC) Notices
Contains IC: 1052D-WLU5000
CAN ICES-3 (B)/NMB-3 (B)
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause interference; and (2) This
device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Epson America, Inc. Limited Warranty
Two-Year or 12,000-hour Projector Limited Warranty
A. What Is Covered: Epson America, Inc. (“Epson”) warrants to the purchaser of the
Epson product enclosed with this limited warranty statement that the product, if
purchased and operated in the United States, Canada, or Puerto Rico, will be free
from defects in workmanship and materials for a period of two (2) years from the
date of original purchase or 12,000 hours of use, whichever occurs first.
B. What Epson Will Do To Correct Problems: If your product requires service during the
limited warranty period, please call Epson at the number at the end of this statement
and be prepared to provide the model, serial number, and, if required, date of
original purchase. This line will be answered during Epson’s regular support hours
(currently 6:00 am to 8:00 pm, Pacific Time, Monday through Friday, and 7:00 am to
4:00 pm on Saturday — subject to change). You may also need to provide proof of
purchase if warranty coverage cannot be verified by the serial number. If Epson
confirms warranty service is required, Epson will, at its option, exchange or repair
the product without charge for parts or labor. If Epson authorizes an exchange for
the defective unit, Epson will ship a replacement product to you, freight prepaid,
as long as you use an address in the United States, Canada, or Puerto Rico. The
replacement product may be new or refurbished to the Epson standard of quality.
(The replacement product may not include promotional materials, accessories,
documentation, manuals, software, or cables.) You are responsible for securely
packaging the defective unit and returning it to Epson within five (5) working days
of receipt of the replacement. Epson requires a debit or credit card number to secure
the cost of the replacement product in the event that you fail to return the defective
one. If Epson authorizes repair instead of exchange, Epson will direct you to send your
product to Epson or its authorized service center, where the product will be repaired
and sent back to you. You are responsible for securely packaging the product and
for all postage or shipping costs to and from the Epson authorized service center.
When warranty service involves the exchange of the product or of a part, the item
replaced becomes Epson’s property. If service cannot be provided on the product for
any reason and Epson no longer sells the same model, Epson will replace your product
with a model of equal or superior value. Replacement products or parts assume the
remaining warranty period of the original product covered by this limited warranty
and are subject to its 12,000-hour use limitation.
C. What This Warranty Does Not Cover:
1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters
such as fire, flood, or lightning; or improper electrical currents, software, or
interaction with non-Epson products
2. Any damage caused by or any service for third-party software, applications, parts,
components, or peripheral devices added to the product after its shipment from
Epson, such as dealer- or user-added boards, components, or cables
3. Any damage caused by installing the product next to a heat source or directly in
the path of an air vent or an air conditioner
4. Damage due to excessive, continual usage
5. Damage caused by failure to properly maintain the product (see your online User’s
Guide for details)
6. Service when the product is used outside the U.S., Canada, or Puerto Rico
7. Warranty service if the product label, logo, rating label, or serial number has been
removed
8. Consumables such as filters or any items that are identified as being replaceable
by the user in the product documentation (see your online User’s Guide for details)
9. Loss of data
10. Installation or removal
11. Any damage from service performed by anyone other than an Epson Authorized
Servicer
12. Damage resulting from operation or storage in areas with smoke, oil, high
humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock
13. Cosmetic damage caused by handling or normal wear and tear during use
14. Any product or parts purchased as used, refurbished, or reconditioned
G. Other Provisions:
1. Other Rights You May Have: This warranty gives you specific legal rights, and
you may also have other rights which vary from jurisdiction to jurisdiction. Some
jurisdictions do not allow limitations on how long an implied warranty lasts, or
allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
2. Warranties in Canada: In Canada, warranties include both warranties and
conditions.
3. Governing Law: Except for any claims subject to arbitration pursuant to Section F,
you and Epson agree that the law of the state where you reside shall govern.
4. Venue: Except for claims subject to arbitration pursuant to Section F, in the event
of a dispute you and Epson both consent to the jurisdiction of your state of
residence or, if none, then of the courts in Los Angeles County, California.
To find the Epson Authorized Reseller nearest you, please visit www.epson.com in the
U.S. or www.epson.ca in Canada.
To find the Epson Customer Care Center nearest you, please visit
www.epson.com/servicecenterlocator in the U.S. or www.epson.ca/servicecenterlocator
in Canada.
To contact the Epson ConnectionSM, please call [phone] or [phone] in the
U.S. and [phone] in Canada.