Epson Expression 11000XL - Graphic Arts Instruction Manual

Home > Using the Transparency Unit
Unpacking the Transparency Unit
Unlocking the transportation lock
The optional A3 Transparency Unit (B12B813362) makes it possible to scan films and slides in full
color. Once you install the Transparency Unit, you can leave it in place even when you want to
scan paper documents.
Make sure that all the items shown below are included and have not been damaged during
shipping. Contact Epson Technical Support if any item is missing or damaged.
a. transparency unit
b. transparency guide
c. film holders
Unlocking the transportation lock
Before you install the Transparency Unit, you need to unlock the transportation lock.
Turn the unit so that the glass side faces up.
Use a coin to unlock the transportation lock by turning it counterclockwise one-quarter.
Page 1 of 2Unpacking the Transparency Unit
4/12/2013mhtml:htt
p
://share
p
oint01/su
pp
ort/FAQ/Lists/Ea
g
leSoft FAQ Re
q
uests/Attachments/4123
/
...
18335_Epson_11000XL_Unpacking_Transparency_Unit_Rev.1_4.16.2013 Revision 1 Revised Date: 4.16.2013

Top
Note:
Before transporting the scanner, lock the transportation lock to prevent
damage.
If the unit’s lamp assembly is not in its home position, you cannot lock the
transportation lock. If this is the case, reattach the unit to the scanner, close
the unit, and then turn on the scanner; the unit’s lamp assembly then returns
to its home position. Turn off the scanner and remove the Transparency Unit.
Home Contents Index Help
(NPD4827-00 EN)
Page 2 of 2Unpacking the Transparency Unit
4/12/2013mhtml:htt
p
://share
p
oint01/su
pp
ort/FAQ/Lists/Ea
g
leSoft FAQ Re
q
uests/Attachments/4123
/
...