Epson GT-30000 Series Instruction manual

Proof Sign-off:
Composer SD
Corrector SS
Translator _______
Corrector _______
GT-30000
A5 size Quick Start Manual_E.fm
1/11/01
R
Quick Start Manual
EN
Color Image Scanner
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent
liability is assumed with respect to the use of the information contained herein. Neither is any liability
assumed for damages resulting from the use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties
as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or
alterations to this product.
SEIKO EPSON CORPORATION and its affiliates shall not be liable for any damages or problems
arising from the use of any options or any consumable products other than those designated as Original
EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark of SEIKO EPSON CORPORATION.
IBM and PS/2 are registered trademarks of International Business Machines Corporation.
Apple, Macintosh, Mac, iMac, and Power Macintosh are registered trademarks of Apple Computer,
Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of
America and other countries.
Adobe and Acrobat Reader are registered trademarks of Adobe Systems Incorporated.
ISIS is a registered trademark of Pixel Translations, a Division of ActionPoint, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective companies.
Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan.
®

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
3
EN
■Table of Contents
Where to Find Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warnings, Cautions, and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
For Windows and SCSI users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
For Windows and IEEE 1394 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
For scanning over a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Scope of Delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Choosing a Place for the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Releasing the Transportation Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Plugging In the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Initializing the Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the Scanner to Your PC Using the SCSI Interface . . . . . . . . . . 10
Understanding SCSI connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the SCSI ID number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the terminator switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the select switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power-on sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Power-off sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing EPSON TWAIN HS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
For Windows Millennium Edition users . . . . . . . . . . . . . . . . . . . . . . . . . 16
For Windows 98 and 2000 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
For Windows 95 and NT 4.0 users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Calibrating Your Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Online Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installing Adobe Acrobat Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Accessing the online manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
4
■Where to Find Information
■Quick Start Manual (this manual)
This guide provides you with information and instructions on how to unpack and set
up your scanner. Here you will also find instructions on using the online documentation
provided on CD-ROM.
■Setup Guide (online)
Describes how to set up and use the scanner. Basic scanning operations are covered. It
also explains how to install and configure the EPSON scanner software and the
Automatic Document Feeder, and includes information on how to calibrate your
system. The guide describes how to make basic software settings, use the Start Button
function, and scan images in a networked environment.
■Reference Guide (online)
Providesbasicinformationaboutscanning,detailedreferenceonsettingsandfunctions
ofEPSONTWAINHSandotherEPSONscannerutilitysoftware,troubleshootingtips,
and customer support information. Explanations about EPSON TWAIN HS also apply
to EPSON TWAIN HS Network. It also explains how to set up the scanner server PC.
■Information on EPSON TWAIN HS and EPSON TWAIN HS Network
(online help)
Provides you with detailed information on EPSON TWAIN HS and EPSON TWAIN
HS Network. To display the online help, click the Help button in the dialog box of
EPSON TWAIN HS or EPSON TWAIN HS Network.
■Information on ISIS driver
Refer to the respective documentation provided on the EPSON Scanner Software CD-
ROM.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
5
EN
■ENERGY STAR Compliance
As an ENERGY STAR Partner, EPSON has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
The International ENERGY STAR Office Equipment Pro-
gram is a voluntary partnership with the computer and
office equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers,
fax machines, copiers, and scanners, in an effort to reduce
air pollution caused by power generation.
■Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of your scanner.
■System Requirements
Before installing the scanner software, make sure that your system meets the following
requirements.
❚For Windows and SCSI users
Scanner: EPSON GT-30000
System: Microsoft®Windows®95, Windows 98, Windows Millennium Edition,
Windows 2000 Professional, or Windows NT®4.0 Workstation
Interface: SCSI adapter

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
6
❚For Windows and IEEE 1394 users
❚For scanning over a network
Display: VGA or higher resolution monitor 640 ×480 pixel resolution (800 ×600
or higher recommended), with High Color (16bit) or True Color (32bit)
setting
Note:
Colorandtonereproductionaresubjecttothedisplaycapabilityofyour
computer system, including the video card, display monitor, and
software. See the product documentation for details.
Scanner: EPSON GT-30000
System: Microsoft Windows Millennium Edition, or Windows 2000
Professional pre-installed
Interface: IEEE 1394 adapter
Display: VGA or higher resolution monitor 640 ×480 pixel resolution
(800×600 or higher recommended),with High Color (16bit) or
True Color (32bit) setting
Note:
Color and tone reproduction are subject to the display
capability of your computer system, including the video card,
display monitor, and software. See the product documentation
for details.
Computer: For EPSON Scan Server
IBM PC/AT compatible computer (Intel
Pentium or faster processor is recommended)
For EPSON TWAIN HS Network
IBM PC/AT compatible computer (Intel
Pentium or faster processor is recommended)

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
7
EN
■Scope of Delivery
Make sure you have all the parts listed below:
❏Scanner
❏Power cord
❏Automatic Document Feeder
❏2 knobs
❏2 installation screws
❏screwdriver
❏CD-ROM
Operating System: For EPSON Scan Server
MicrosoftWindows95,Windows98,Windows
Millennium Edition, Windows 2000
Professional/Server, or Windows NT 4.0
Workstation/Server
For EPSON TWAIN HS Network
MicrosoftWindows95,Windows98,Windows
Millennium Edition, Windows 2000
Professional, or Windows NT 4.0 Workstation
System Configuration: Minimum two computers on the network
Scanner: EPSON GT-30000
Hardware Interface for Scanner: SCSI, IEEE 1394
(IEEE 1394 is available on Windows
Millennium Edition and Windows 2000
preinstalled only)
Hardware Interface for Networking:10BASE-T/100BASE-TX, 10BASE-5,
10BASE-2
Ethernet Communication Protocol: TCP/IP

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
8
■Choosing a Place for the Scanner
Follow the guidelines below when selecting a location for your scanner:
❏Place the scanner on a flat, stable surface. The scanner will not operate properly if
it is tilted at an angle.
❏Place the scanner close enough to the computer for the interface cable to reach it
easily.
❏Place the scanner near a wall outlet where the power cord can be easily unplugged.
❏Allow space behind the scanner for the cables, and space above the scanner so that
you can raise the Automatic Document Feeder fully.
❏Keepthescannerawayfromhightemperatures,humidityandexcessivedirtordust.
Also avoid using or storing the scanner in places subject to rapid changes of
temperature and humidity.
❏Keep the scanner away from direct sunlight and strong light sources.
❏Avoid places subject to shocks and vibrations.
■Releasing the Transportation Lock
Before installing the Automatic Document Feeder and connecting the scanner to a
power source, you must release the transportation lock.
1. Place the scanner on a flat, stable surface with its back side facing you.
2. While pushing the transportation lock button, turn it counterclockwise to the
unlocked position, using a coin or similar disc as shown below.
596mm
658 mm
254 mm*
488 mm
* When Automatic Document Feeder is closed.
100 mm
or more

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
9
EN
The button is flush with the surface of the scanner.
Note:
Before you transport the scanner or store it for an extended period of time, secure the
carriage by turning the transportation lock button clockwise while pushing it. When
the transportation lock button is locked, the button goes down.
■Plugging In the Scanner
1. Make sure that the scanner is turned off. The scanner is off when the OPERATE
button is raised (not depressed).
2. If the power cord is not attached to the scanner, connect it to the AC socket on the
back of the scanner, and plug the other end into a properly grounded wall outlet.
c
Caution:
It is not possible to change the scanner’s voltage. If the label on the back of
thescannerdoesnotshowthecorrectvoltage for your country,contact your
dealer. Do not plug in the power cord.
unlocked position

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
10
■Initializing the Scanner
Before connecting the scanner to your PC, follow the steps below to make sure that the
scanner is operating properly.
1. Open the Automatic Document Feeder so you can see the operation of the scanner
during initialization.
2. Turn on the scanner by pressing the OPERATE button.
3. Make sure the carriage moves slightly to the right and then back to its original
position, and the fluorescent lamp on the carriage flashes.
The READY light comes on, meaning the scanner has completed initialization.
4. Turn off the scanner.
Ifthe scanner doesnotwork asdescribed,turnitoff.Make surethepowercordis firmly
plugged in and that you have released the transportation lock, then try again.
c
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before turning
it back on. Rapidly turning the scanner on and off can damage the scanner.
■ConnectingtheScannertoYourPCUsingtheSCSIInterface
For instructions on connecting the scanner to your PC using the SCSI interface, read
this section.
Unless your PC already has a SCSI board installed, you need to install one, along with
SCSIdriversoftware.InstalltheSCSIboardaccordingtothedirectionsincludedwithit.
If your PC has a SCSI board up and running, connect the scanner as described in the
next section.
carriage
(in the home position)

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
11
EN
Note:
❏You will need to install the SCSI driverthat is normally included with Windows
95, 98, Millennium Edition, NT (see your system documentation for
instructions), or 2000, or the driver described in the SCSI board installation
documentation.
❏If you are having errors or poor performance, an updated driver may help. The
latestdrivermaybe availablefordownload from the Websiteof the SCSIboard
manufacturer.
❚Understanding SCSI connections
Read the following sections to determine how to set up your SCSI devices and whether
you need any optional SCSI cables.
Daisy chain
The SCSI interface allows you to connect up to seven devices (such as a scanner, hard
drive, CD-ROM, and so on) to the computer, in what is called a “daisy chain”
arrangement. Only the first SCSI device in a daisy chain is connected to the computer;
each of the other devices is connected to another SCSI device.
Note:
To work with a scanner in wide SCSI, the scanner must be connected to the wide SCSI
Host Adapter via a 68-pin SCSI cable. If narrow SCSI devices exist between the SCSI
host adapter and the scanner, the scanner works only in the narrow SCSI mode. In this
case, you need to set the select switch to N (narrow).
SCSI cables
You may need to purchase SCSI cables before setting up your SCSI daisy chain. The
scanner has two SCSI connectors: one is for a wide 68-pin SCSI cable and the other
for a narrow 50-pin SCSI cable.Be sure the SCSI cableconnectors are suitable for your
hardware, according to the maker of your SCSI device and SCSI interface board.
SCSI ID and terminator
Each device has a SCSI ID number: the computer is usually set to number 7, and each
ofthe otherdevicesmusthaveadifferent number between0and 6.Also, thefirstdevice
and the last device in the chain (not including the computer) must have a terminator.
No other device can have a terminator, or if a terminator does exist, it must be turned
off or removed.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
12
❚Setting the SCSI ID number
The scanner’s default SCSI ID number is 2.
If you add the scanner to a system in which one of your SCSI devices already has a
SCSI ID of 2, change the ID number to an unused number using the rotary switch. See
the table below as a guide.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned to another
device; otherwise the PC, scanner, and other devices will not operate
properly.
❚Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices to communicate
properly with each other. You may need to change the terminator switch setting
according to your computer system.
Note:
Do not use an external terminator.
ID Availability Description
0 Not recommended Usually used for hard disk
1 Not recommended Usually used for hard disk
2 Factory setting of the scanner
3
4
5
6
7 May not be available Usually used for the SCSI board
TheSCSIIDrotaryswitchislocated
at the rear of the scanner.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
13
EN
❚Setting the select switch
The scanner has two SCSI connectors: one is for a wide68-pin SCSI cable and the other
for a narrow 50-pin SCSI cable. You may need to change the select switch setting
according to the SCSI cable you are using.
The terminator switch is located
at the rear of the scanner.
Only the scanner is connected
terminator on
(other SCSI device)
terminator on
The scanner is the last device in the daisy chain
The scanner is in the middle of the daisy chain
terminator off
(other SCSI device)

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
14
You may need to change the select switch setting according to the SCSI device
connection.
❚Connecting the scanner
Use the following steps to connect the scanner to your PC or to another SCSI device.
Note:
The combination of connectors on the SCSI interface cable you need varies depending
on the maker of your SCSI device and SCSI interface board.
1. Make sure the scanner, your PC, and all other SCSI devices are turned off and
unplugged from the power source.
c
Caution:
Do not connect the scanner to your PC orother devices while they are
turned on, otherwise damage may occur.
2. Connect one end of the interface cable to a suitable scanner SCSI connector until
the locks on both sides snap in.
Note:
❏To connect the scanner to a PC or any other SCSI device, the total length
of cable in the daisy chain must not exceed 3 meters; otherwise the system
may not work properly.
❏Make sure no other interface is used.
❏Before connecting the scanner to a PC, you need to set the select switch.
See “Setting the select switch” on page 13 for details.
3. Connect the other end of the cable to the SCSI port of your PC or another SCSI
device.
Select switch SCSI cable
N Host adapter is wide SCSI, and there are 50-
pin SCSI cables between host adapter and
scanner.
W (default) Except above connection.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
15
EN
4. Plug in the power cords of your PC, the scanner, and other external SCSI devices.
Note:
Before turning on your system, be sure to read "Power-on sequence" following.
❚Power-on sequence
KeepthefollowinginmindeverytimeyouturnonyourPCandSCSIdevices,including
the scanner.
❏Be sure to turn on the SCSI devices first and your PC last. If you turn on a SCSI
device after your PC, the SCSI device or your PC may not work properly.
❏For Windows 95, 98, 2000, or Millennium Edition users:
The first time you turn on your PC after the scanner, one of the following dialog
boxes or similar may appear.
Ifyouseeoneofthese,followtheinstallationinstructionsasdescribedin“Installing
EPSON TWAIN HS” on page 16, then see “Power-off sequence” following.
❚Power-off sequence
Keep the following in mind every time you turn off your PC and SCSI devices.
❏When you are finished using your system, turn off your PC first, then the scanner
and other SCSI devices.
❏While using your PC, do not turn off any SCSI device which has a terminator that
is active (on).
Windows 95
Windows 98 Windows 2000 Windows Millennium Edition

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
16
❏Do not turn the scanner off and back on while using your PC, otherwise the scanner
may not work properly.
Whenthe connectionis complete,you needto install thescanner software,as described
in “Installing EPSON TWAIN HS” on page 16.
■Installing EPSON TWAIN HS
After connecting thescanner to your PC, install the scanner software (EPSON TWAIN
HS) from the CD-ROM. The installation steps differ depending on the version of
Windows.
For Windows Millennium Edition users, see the instructions following.
For Windows 98 and 2000 users, see “For Windows 98 and 2000 users” on page 18.
For Windows 95 andNT 4.0users, see “ForWindows 95 and NT 4.0 users” on page19.
Note:
❏If the scanner software is already installed and you are upgrading your system
to Windows 98, 2000, or Millennium Edition, be sure to uninstall it before the
upgrade, and then re-install it using the same steps described in this section.
For more information, see chapter 4 “Maintenance and Troubleshooting” in
your online Reference Guide.
❏To install the scanner software in Windows 2000 or NT 4.0, you need to log on
to Windows as an Administrator.
❚For Windows Millennium Edition users
Note:
If you use the Scanner and Camera Wizard to select a scanner driver, EPSON
recommends selectingthe EPSON TWAIN driver to scan images, not the “WIA” driver
provided with Windows Millennium Edition. See Windows online help for details on
the Scanner and Camera Wizard.
1. Connect your scanner to your PC.
2. Turn on the scanner, then your PC.
Note:
It is important to follow this power-on sequence if you are using a SCSI
interface. Otherwise the Plug and Play feature will not work.
3. WhentheAddNewHardwareWizarddialog box appears, select the Specifythe
location of the driver option, then click Next.
4. Insert your scanner software CD-ROM in the CD-ROM drive.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
17
EN
5. MakesuretheSearchforthebestdriverforyourdeviceoptionandtheSpecify
a location check box are selected. Next, browse the CD-ROM for EPSON\(your
preferred language)\WINME, then click Next.
6. When the dialog box shown below appears, click Next.
7. The EPSON Screen Calibration utility automaticallystarts. Follow the instructions
on the screen. For details, see “Calibrating Your Screen” on page 21.
Note:
If the EPSON Screen Calibration utility does not start automatically, see your
online Reference Guide to calibrate your screen after installing the scanner
software.
8. When a dialog box appears informing you that Windows has finished the software
installation, click Finish.
9. This completes the EPSON TWAIN HS installation. Restart your PC.
Note:
It is important to restart your PC before using the scanner.
See chapter 3 in your online Setup Guide to install the other utility and applications
from the scanner software CD-ROM: to install EPSON Scan Server and EPSON
TWAIN HS Network, see "Software for Scanning over a Network", and to install the
ISIS®driver, see "Installing Another Application Software".

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
18
❚For Windows 98 and 2000 users
1. Connect your scanner to your PC.
2. Turn on the scanner, then your PC.
Note:
It is important to follow this power-on sequence if you are using a SCSI
interface. Otherwise the Plug and Play feature will not work.
3. When the Add New Hardware Wizard (for Windows 98) or the Found New
Hardware Wizard (for Windows 2000) appears, insert the scanner software CD-
ROM in the CD-ROM drive, then click Next.
4. Select the Search for the best driver for your device option (for Windows 98)
or the Search for a suitable driver for my device option (for Windows 2000),
then click Next.
5. Make sure only the Specify a location check box is selected, then proceed to step
6 (for Windows 98) or click Next (for Windows 2000) before proceeding to step 6.
6. Browseandselect,ortypeintheCD-ROMdriveletter,theEPSONfolder,thefolder
of your preferred language, and the Win98 or Win2000 folder as the location, as
shown below. Finally, click Next (for Windows 98) or OK (for Windows 2000).
Windows 98
Windows 2000

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Right
R
19
EN
7. Follow the instructions on the screen.
For Windows 98 users:
You may be asked to insert the Windows 98 CD-ROM. If so, replace the scanner
softwareCD-ROMwiththeWindows98CD-ROM.Makesure thatthecorrectCD-
ROM drive letter and the Win98 folder are specified in the Copy files from: box.
After installing the appropriate files, replace the Windows 98 CD-ROM with the
scanner software CD-ROM.
For Windows 2000 users:
Click Yes in the dialog box that appears to continue.
Note:
If you click No and stop installation, your scanner will appear under Other
Devices with a question (?) mark in the Device Manager menu. You must
reinstall EPSON TWAIN HS. Follow the instructions in chapter 4 “Mainte-
nance and Troubleshooting” in your online Reference Guide.
8. The EPSON Screen Calibration utility automaticallystarts. Follow the instructions
on the screen. For details, see “Calibrating Your Screen” on page 21.
Note:
If the EPSON Screen Calibration utility does not start automatically, see your
online Reference Guide to calibrate your screen after installing the scanner
software.
9. When a dialog box appears informing you that Windows has finished the installa-
tion, click Finish.
Note:
If necessary, restart your PC.
This completesthe EPSONTWAIN HS installation.See chapter 3 in youronline Setup
Guide to install the other utility and applications from the scanner software CD-ROM:
to install EPSON Scan Server and EPSON TWAIN HS Network, see "Software for
Scanning over a Network" and to install the ISIS®driver, see "Installing Another
Application Software".
❚For Windows 95 and NT 4.0 users
1. Make sure that the scanner is turned on.
2. Turn on the PC, and start Windows.
If you are using Windows NT 4.0, insert the scanner software CD-ROM in the CD-
ROM drive, then go to step 3.

GT-30000
A5-Format Quick Start Manual_E.fm
1/11/01 Left
L
20
For Windows 95, either of the following dialog boxes appears.
❏If the following dialog box appears, insert the scanner software CD-ROM in
the CD-ROM drive, then click Next.
Whenpromptedforthedriveandfolder,selecttheCD-ROMdrive,theEPSON
folder, the folder of your preferred language, and the Win95 folder.
When a dialog box appears informing you that an updated EPSON GT-30000
driver has been found, click Finish and go to step 3.
❏If the following dialog box appears, insert the scanner software CD-ROM in
the CD-ROM drive.
Select Driver from disk provided by hardware manufacturer. Click OK
then Browse.
Select the CD-ROM drive, the EPSON folder, the folder of your preferred
language, and the Win95 folder. Finally click OK and go to step 3.
3. Double-click the My Computer icon.
4. Double-click the CD-ROM drive icon. A dialog box asking for your preferred
language appears. If no dialog box appears, double-click the Cdsetup.exe icon.