ERA Protect Replica Siren User manual

Model: SALAPWHRSBU
BATTERY OPERATED REPLICA SIREN
1. OVERVIEW
The ERA Protect Replica Siren is a visual deterrent,
which includes flashing comfort lights to either; show
potential intruders that there is likely to be a live alarm
system protecting the property, or enhance the
visibility of an existing live alarm system.
2. GET TO KNOW YOUR
PRODUCT
Using the drilling template mark up the mounting holes
required to be drilled.
ERA Home Security Ltd.
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: [e-mail]
Web: www.eraprotect.com
CUSTOMER HELPLINE
0345 257 2500
3. WIRELESS OUTDOOR
SIREN INSTALLATION
1.
INSTALLATION AND
OPERATING MANUAL
Cover Screw
Front Cover Screw
Bayonet
4. Take the backplate of the Siren, three screws, wall
plugs and a screwdriver to the location.
Comfort
LEDs
ABS Plastic Feet
5. Push the wall plugs into the holes and proceed to
screw the backplate onto the wall using the
screws provided.
6. Remove the battery cover and place 3 x AA batteries
into the battery compartment
2. Drill the marked holes where you will place your wall
plugs.
Note: Battery is required to be connected before use.
3. Remove the front cover.

ERA Home Security Ltd.
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: [e-mail]
Web: www.eraprotect.com
5. SPECIFICATION
CUSTOMER HELPLINE
0345 257 2500
Battery:
Battery Life:
Housing Material:
Size (LxWxH):
Battery 3 x AA
Alkaline 4.5V DC
2 years
ABS Plastic
250 x 242.7 x 64mm
4. BATTERY
REPLACEMENT
1. Go to the location of the Siren and remove the cover
screw using a screwdriver.
Remove the front cover, then proceed to remove the
battery cover.
Remove the 3 x AA batteries from the battery
compartment.
Replace with new recommended batteries
Apply the battery cover to the backplate and then
replace the front cover back to the backplate.
3.
9. Screw the cover screw at the bottom of the Siren
lens with a screwdriver to fix the cover to the
backplate.
4.
5.
2.
7. Place the battery cover onto the backplate and screw
it securely.
Align the front cover to the backplate, hang and
slide down.
8.