ERA Nu Mail Shield TS008 User manual

Nu Mail Shield TS008
Jacknut Installation
for fixing into non-reinforced sections
Carefully push the
Jack Nuts into the
drilled holes, to position
Using an appropriate Philips hand
screwdriver, carefully tighten screws until a
firm fix is achieved (you must not use a power tool to tighten)
Place jig over internal plate
& drill 9.50 holes
Fit screws in Nu Mail Shield then
wind Jack Nuts on (finger tight)
Fit letterplate with
supplied screws
Fit support bushes to
external plate
2
4
5
3
1
Routing Detail
280
264
48 12
==
= =
R6
6
Fit screw covers
ERA, Straight Road, Willenhall, West Midlands. WV12 5RA
Tel: [phone] Fax: [phone] Email: [email protected]
www.eraeverywhere.com

Nu Mail TS008 Security Cowl
Screw Installation
for fixing into Timber and reinforced sections
Rest Cowl on top of Internal
letterplate and fit appropriate fixing
screws for installation
Fit screw covers
Fit letterplate with
supplied screws
Fit support bushes to
external plate
2
3
1
Routing Detail
280
264
48 12
==
= =
R6
ERA, Straight Road, Willenhall, West Midlands. WV12 5RA
Tel: [phone] Fax: [phone] Email: [email protected]
www.erahomesecurity.com