Adjustment
1
2
Follow these instructions to tighten or loosen tension.
14mm
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Minimize Lift Tension BEFORE:
· Removing Mounted Equipment.
· Shipping Cart
· Storing Cart
To Minimize Lift Tension
1. Lower worksurface to lowest position.
2.
Turn adjustment nut at bottom of riser
counterclockwise until it stops (Adjustment
may require 40-60 revolutions).
Failure to heed this warning may result in serious
personal injury or property damage!
822-634
14mm (9/16”)
WARNING
5
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists at.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain at.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
Set Your Workstation to Work For YOU!
6
Check out the collection of computers & hardware we offer.