Ergotron 100 Series User manual

1 of 5
888-47-008-00 rev. L • 10/22
100 Series Keyboard Tray Pivot

2 of 5
888-47-008-00 rev. L • 10/22
Learn more about ergonomic computer use at: www.ergotron.com/ergonomics
This mounting height is a recommendation for an
ergonomic workstation. If user elbow heights are
diff erent than this, you should change mounting height
to accommodate user elbow heights. (Change mounting
height one inch for every one inch diff erence in user
elbow heights).
8-32 x 5/16"
5 - 15 lbs
(2 - 6.8 kgs)

3 of 5
888-47-008-00 rev. L • 10/22
8-32 x 5/16"

4 of 5
888-47-008-00 rev. L • 10/22
To attach the Keyboard Pivot with the Mounting Plate, follow the instructions provided with the
mounting application.

5 of 5
888-47-008-00 rev. L • 10/22
© 2005 Ergotron, Inc. All rights reserved.
For the latest User Installation Guide please visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
Ergotron's 100 Series Keyboard Tray Pivot is factory-set to provide positive
pivot control and a smooth moving force throughout the entire pivot range of
motion. To customize your installation, you will evaluate the Pivot operation
by moving the keyboard tray through its full range of movement. If excessive
force is required to lift the keyboard tray or if the keyboard tray does not stay
in the desired position, pivot adjustment is required. Adjust for a controlled
motion of the keyboard tray over the entire range of travel.
1/2"
(12.7mm)
1/2"
(12.7mm)
1/2"
(12.7mm)
1/2"
(12.7mm)