Erickson BIG BED JUNIOR User manual

Item no: 07605
1/5
To avoid personal injury and/or property damage, please read and follow
ALL instructions before assembling and operating.
1. Never overload Big Bed®Junior . Maximum capacity is 350 lb. (Evenly distributed load).
2. A 2” receiver is required to use the Big Bed Junior. Refer to manufacturer’s hitch capacity.
3. Long and heavy loads reduce control of steering, and braking capability. Use extreme caution when
hauling longer loads.Test control before accelarating.
4.The load must rest and extend beyond the horizontal support of the apparatus.
5. Secure the load by utilizing the tie-down hook holes with weight appropriate strap. Fasten a red
flag to mark the end of the load.
6. Do not leave the Big Bed in the receiver unless in use.
7. Check Government regulations for specific laws in your province or state on the allowable overhang
out the back of your vehicle.
8. Proper use of this product is critical to safety, and beyond the control of Erickson Manufacturing
Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for any damage resulting from
improper use.The liability of this product is limited to its purchase price if it proves to be defective
in material and/or workmanship.
Usage
Ideal for short-bed trucks, SUVs, vans, rhino/gators, and all other vehicles capable of hauling a load.
We recommend using your new Big Bed for the following :
• Lumber
• Canoes
• Extension ladwders
• Oversized sheets of plywood and drywall
• Utilize it as an extended workspace/bench
• Throw a tailgate party
• Create additional space for your hunting gear and supplies

Item no: 07605
2/5
The extender can be assembled two different ways, respectively with the long end or short
the end of L-extension (2) connecting to theT-support(1)
ASSEMBLY 1,
1. With the short end of the L-extension (2) facing up, slide it into theT-support (1);
2.TheT-support (1) has 5 holes to change the height. Line up the hole on theT-support (1)
with the desired hole on the L-extension (2);
3. Insert the pin lock (3) through the T-support (1) and the L-extension (2), secure with ∮3.8
cotter pin (4).
4. Pull on the L-extension (2) and the T-support(1) to make sure they are properly locked in
place.


Item no: 07605
3/5
ASSEMBLY 2
Assembly 2 are all same with that of assembly 1 expect that we change the connection
side of L-extension (2) to be the long end for theT-support(1).

Item no: 07605
4/5
Part List
Part# Description Q’ty Part# Description Q’ty
1 T-support 1 3 16 Pin 1
2 L-extension 1 4 3.8 Clip 1

Item no: 07605
5/5
Warranty Exclusions
This warranty does not cover the following repairs and equipment:
Normal Wear
This warranty does not cover the repair when use has exhausted the life of a part or the
equipment as a whole.
Installation, Use and Maintenance
This warranty will not apply to parts and/or labor if this product is deemed to have been misused,
neglected, involved in an accident, abused, loaded beyond specifications, modified, or installed
improperly. Normal maintenance is not covered by this warranty.
Other Exclusions
This warranty excludes:
• Cosmetic defect such as paint, decal etc.
• Wear items
• Accessory parts
• Failures due to acts of God and other force majeure events beyond the manufacturer’s control.
• Problems cause by parts that are not Erickson Manufacturing Ltd. parts.
Limits of implied Warranty and Consequential Damage
Erickson Manufacturing Ltd. disclaims any obligation to cover any loss time, use of this product, freight, or
any incidental or consequential claim by anyone from using this product. THIS WARRANTY IS
IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. A unit provided as exchange will be
subject to the warranty of the original unit. The length of the warranty governing the
exchanged unit will remain calculated by reference to the purchase date of the original unit. This
warranty gives you certain legal rights which may change from state to state.Your state and/or
province may also have other right you may be entitled to that are not listed within this warranty.
Contact Information
Marine City, Michigan 48039
Thamesville, Ontario N0P 2K0
Toll Free: 1-888-546-4668
Warranty