Escali Pico User manual

Pico High Precision
Digital Scale
Model # PR500S
www.escali.com
PRODUCT
MANUAL

2
Thank you for purchasing the Escali PR500S Digital Scale!
Please read the following operation information to ensure the proper
function of your new scale.
HOW TO WEIGH
1. Press the ON/ZERO key. All display segments will appear for
approximately 2 seconds before resetting to zero.
2. Press the UNIT key to select the units (g, lb, oz, or lb+oz)
3. Place item slowly on the platform, and the weight will appear on the
display.
4. Remove the item, and press the ON/ZERO key to turn the scale off.
HOW TO USE THE “TARE” FEATURE
This feature allows you to obtain the exact weight of an item in a
container, by subtracting the weight of the container.
1. Place the container without the item, slowly on the platform.
2. Press the ON/ZERO key. The weight of the container will be
removed, and the display will reset to zero.
3. Slowly add the item to the container. The display will show the
weight of the item only.
4. You may continue to determine the weight of each additional item
as they are added by repeating steps 2 & 3.
HOW TO CLEAR THE “TARE” FEATURE
1. Remove all items from the platform.
2. Press the ON/ZERO key.
HOW TO USE THE COUNTING FEATURE
This feature allows you to have the scale count a large quantity of the
same item, based on the weight of a sample quantity.
1. Turn the scale on. Wait for 2 seconds until zero appears on display.
2. Place a sample quantity of 10, 20, or 50 pcs on the platform.
3. Press the PCS key to activate the counting mode.
4. Press and hold the PCS key for 3 seconds until the sample
quantity flashes. Immediately press the PCS key again if you need
to change the sample quantity.
5. Wait 3 seconds, and press the PCS key to confirm the samplequan-
tity. “CAL” will appear briefly on the display.
6. Place your total quantity on the platform. The display will show the
total quantity.
7. To return to weighing mode, remove your items from the platform,

3
Measuring What’s Next™
and press the UNIT key.
HOLD FEATURE
This feature is to weigh oversized items that block the display. After
placing an item on the scale, a beep sound is heard when the weight is
stable. You can now remove the item, and the weight will appear on the
display for 5 seconds.
PROPER USE & CARE
• Use and stow the scale at room temperature.
• Use on a flat, level, and stable surface.
• The scale is an instrument of precision. Do not submit the scale to
shaking, excessive vibration, or other rough treatment.
• The display may be affected by electromagnetic disturbances such
as radios, microwaves, or cell phones. If such disturbances occur,
remove the source of the disturbance, and restart the scale.
• Disassembling or tampering with the scale voids the warranty.
• Clean the scale with dish soap, and a damp cloth.
• Do not submerge in liquid; the scale is not waterproof.
WARNING MESSAGES
0-Ld Overload warning
Out2 Load cell is damaged or needs recalibration
Lo Low battery warning
PRODUCT SPECIFICATIONS
Model: PR500S
Capacity: 500 g / 18 oz
Graduation: 0.1 g / 0.005 oz
Product Dimensions: 4.5” x 3.75” x 1”
Platform Dimensions: 3.75” x 3.5”
Power Source: 1 - 9-Volt battery (included)
Automatic shut-off: 5 minutes

ESCALI CORPORATION
3203 Corporate Center Drive, Suite 150
Burnsville, MN 55306
USA
PRODUCT SUPPORT
24/7 Online support: https://escali.zendesk.com
Email support: [email protected]
Phone support: 1-800-467-6408
LIFETIME LTD WARRANTY
This scale is guaranteed to be free of defects in materials and
workmanship. For more details visit: www.escali.com/warranties
Escali’s liability is limited to two (2) times the cost of the product.
© Escali Corp., Minneapolis, MN, USA. All rights reserved. Escali, the
Escali logo and other Escali marks are owned by Escali Corp. and may be registered.