ESS ESS-71R.USD.2 User manual

mobile video

ESS-71R.USD.2
7" wide TFT LCD High Resolution
Monitor
Featuring New L.E.D.
BacklightTechnology.
Congratulations
on
your
purchase
of
an
~Video
Monitor.
It
has been designed, engineered and manufactured to bring you the highest
level
of
performance and quality, and will afford you years
of
viewing pleasure.
Thank you
for
making
~
your choice in car video entertainment!

DVD CONTENTS
1. DVD
Features
-------------------·- -2
~-
Front
Panel
Controls
- - - - - - - - - - - - - -
·~
- 3
3.
Installation
----
---
--
--
- - -
--
---
- - - 4
4.
Remote
Control
Operation
- - - - - - - - - - - - 6
5. OSD
Operation
- - - - - - - - - - - - - - - - - -
~
· 7
6. DVD
Operation
- - - - - - - - - -.- - - - - - - - - - 8
7.
Disc
Compatibility
---
- ---·
------------
9
8.
Handling
Discs-
-------------------9
9.
Safety
Precautions
-----------------10
10.
Troubleshooting
- - - - - - - - - - - - - - - - - -
11
11.Technical
Specifications-----------
-
--
12·
MONITOR CONTENTS
12.MONITOR
Features-
·
--
-
--------------
13
13.Warnings---
~-------
~-----------
14
14.ProductStructure
--
~
~-
-,
------
~---
-14
15.Structure
-------.----------------15
1·
6.Accessories-
- - "- -- - - - - - - - - - - - - - - - 15
17
.Remote
control
- - - - - - - - - -
--
-------16
18.0SD
function
- - - - - - -.- - - - - - - - - - - - - 16·
19.1nstallation
----
-
--
-
--
----
----
- - - 17
1

DVD Features:
• Built-in DVD Player compatible with DVD/VCD/MP3/MP4/CD-R/CD-RW/DIVX
• LED
backlit panels for exceptional picture quality, high efficiency and long life
• Covercolors
easily interchangeable between black, greyand tan to match
vehicle
interior (all 3 colors included)
. • Pole distance adjustable from 4"-7"
apart for universal fit
• Free tilt mechanism allows for adjustmentto optimal viewing angle
• Mini USB
port and SD/MMC card slot for music, image and video files
•Automatically selects PAL/NTSC system
• Front 3.5 mm
jack for headphones
• 2A/V inputs
One 3.5 mm front input
jack
One wired RCA input
• 1A/V RCA output
• Wireless remote control
• Built-in dual-channel speaker
• Built-in FM
transmitter
• Built-in dual channeiiR transmitter
Ch A: 2.3MHz(left)-2.8MHz(right)
Ch
B: 3.2MHz(left)-3.8MHz(right)
• 7"(16:9)
TFT LCD display
• Resolution:480(H) X 3(RGB) X800(W)
• Number
of Pixels: 1,152,000
• Brightness: 400 cd/m2
• Powersupply: DC +12V (1 0.6V-15.8V).
• Powerconsumption: 12W
·Operating temperature:-10°C to +60°C.
• Dimensions: 11" x 6" x 14 %"
• Weight: 3.7 lbs.
2

Front Panel Controls
Cover switch-+----------.
AV2-----'I
SD/MMC/MS ----+-+-__.
,...--------------Power /Source select
~---------Menu
,..--------Play/Stop
....----- Previous
I Next
I - Adjustment +
jj'="'="~"'"'-"""'"==''"'"".''="=~zz~'o"'-~""-~"'"'-""'•"="'="""""·"="-''"'~""""---co=<Oz=zc~-ooooo'o"""'""-==z=-,,"~'~"·="'~~"·===o~=c="'-""""·=l===<o"c"o=z"'-'<-'"~"'"~"'""l"= ' '*o~~·'!\
Le~-~ ® 1 e 1 e 1 e 1 0 LBJ
~- . ~-~--- -- ~--- --- - -- ----- ------~ . -- . - --- ' -~--,..,----~- ,.....____ ---- __, --- ----..---- _____ , __ _
)i
!;
tJ
fl
)'
'-----9'7"T"---t-ttt-- DVD Driver
!1
J--r
3

Installation
First check fo make sure the appearance and installation specifications match
with
the subject vehicle. Before you begin, choose the right accessories and
right tools.
Installation steps:
Step 1. Remove original pillow
Step 2. Choose the correct installation steel tube size, to ensure proper fit.
Step 3. Connect the power cord and the Video cable.
Step 4. Properly position the pillow.
\
~----------------~
135-185mm--
12mm steel tube
Note:
The appearance and installation specifications are not suited for all vehicles.
Please choose the correct appearance and installation specifications.
Connecting Power Line 1
12mm diameter steel tube
2
Remote controller 1
User's manual 1
4

The
headrest
DVD player has an AV input port and an output. The input port
can connect with
other
sources such as GPS, TV Box, Game TV-Box etc.
The
AV
output
port can connect to
other
displays.
<:;
)> )>
G)CJ)>)><
()
c: c:
-·
c.
c: c:
z
a.a.a.
CD
c.
a.
0 +
-·
-·
CD
0 0 0
....J..ooo
0
r;:u
1\J;:ur-
<-·CD
::::J
c:
CD
-·
cc
.....,.
"'C
.....,.
cc
,....
,....
::r
:::rr+c:
"'C
,....
-
,....
c:
Or+
_::::J
,....
c:
0 ::::J"'C
,....
c:
"'C
c:
"'C
c:
,....
,....
c:
"'C
,....
,....
c:
,....
5

Remote Control Operation
MUTE --
Power --
Fast Playback --
Play/ Pause __
Previous/Next --
Number --
Source--
USB/SO--
Exit--
16 : 9or4:3--
6
-- Audio
r--- Title
'---- 4 Way/ENTER
-- Stop
-- DVD Menu Setup
r--- Repeat
r--- Subtitle DVD
r--- Zoom
r--- Angle
1--- Slow
-- 4 Way/TFT MENU
-- TFT MENU SETUP
1--- Display

OSD Operation
1)Pressing "TFT MENU" key to
enter
menu
below.
· 2)Press [ <] [) ]to
adju~t.
IBrightness
1111111111..
.......
00
I IContrast
111111111111.........
00
I IHue
11111111111111.............
00
I
ISaturation
1111111111
..........
00
I I
VOL
11111111111111111111111111111120
I
FM
OFF
Rotation IR OFF Reset
7

DVD Operation
1
)1
)Pressing
"DVD
SETUP"
key
to
enter
menu
below.
2)Press
[.A ] [
..-
]
to
select
an item.
3)Press
[
<IIIII
] [
IJII.]
to
adjust.
TV Display
AngleMark
OSDLang
Captions
Last Momory
PS
ON
ENG
OFF
ON
Go
To
General
Setup
Page
-Video
Setup
page-
Quality
Go
To
Video
Setup
Page
Exit
Setup
Menu
8
DolbyDigital Setup
Equalizer
30
Processing
Go
To
Audio
Setup
Page
Password
Go
To
Preference
Page

Disc
Compatibility
Logo
mark
Disc
type
5
inches
(12cm)
Video
CD 5
inches
(12cm)
Audio
CD 5
inches
(12cm)
CD-ROM
5
inches
(12cm)
Handling Discs
mJo@©
IPIGITALVIDEO
I
mJo@©
IDIOITALAUDIO
I
Approx.133
minutes(SS/SL)
Approx.242
minutes(SS/DL)
Approx.266
minutes(DS/SL)
Approx
.484
minutes(DS/DL)
*SS:Single
Sided
,DS:Double
Sided,
SL:Single
Layer
,DL :Dual
Layer
Approx.74
minutes
Approx.74
minutes
Mp3
:
music
file
WAV:
music
file
MPG: motion
picture
file
VOB: DVD file
JPG:
picture
file
Dust particles, scratches or twisting may cause sound disruption, poor sound quality
or
poor screen image during play.
-Use a soft cloth to gently clean fingerprints and dust on the data surface (polished
side)
of
the disc
-Never use anti-static spray or liquid, benzene, thinner or other chemical solvents
to clean discs. Such chemical solvents may damage the plastic surface
of
the
disc.
-After playing discs, you are advised to place them inside their original cases to
prevent any damage to them.
-Do not expose discs to direct sunlight, high humidity or high temperatures for long
periods
of
time. Discs may deform.
-Do not write on the disc's signal surface. A sharp pen or ink may cause damage to
the surface
of
the disc.
-The sound quality may vary among discs depending on their recording methods.
9

Safety Precautions
-This device is designed to be operated with a DC 12V grounded system.
-Do not allow any foreign substance to get into the disc slot.
-The device may not work in high
or
low temperatures. Stop using the
device until the temperature returns to a normal level. Operating
temperature range: 14°F-122°F)
Cleaning
-When cleaning the device, do not make contact with water. The device
may get damaged.
-Since chemical solvents may damage the surface
of
the unit, do not use
them for cleaning.
-Use a clean and dry cloth to clean.
Condensation
-When turning the heater on
in
the car during a rainy
or
humid day,
moisture may condense on the optical lens. Ifthis occurs, the device
may not read the disc and will not function properly.
In
such a case, it is
advised to remove the disc from the device·until the unit is dried.
Installation and Repairs
-Please install and operate the device as specified by this manual. Ifyou
cannot install the device correctly yourself, take it to an authorized
dealer.
-Do not open the device by yourself for repairs. Ifthe device does not
work properly, take it to an authorized dealer. (Ifyou disassemble the
unit, you will void the warranty).
Video/Audio Trouble
-When driving on a rough road the unit is prone to severe shaking and
may experience video/audio problems. This is inevitable.
10

Troubleshooting
Fault Reason Resolution
Yellow wire should be connected to
12v
+source; red wire should be
Connect power
connected to theACC; black wire
correctly
No power
should be connected to the ground
Fuse burned out
Change fuse
Power cable is
Connect power
disconnected
correctly
NoAV input Input video
No picture
Reconnect
Video lines disconnected
video lines
Battery is blocked by Remove
paper
Remote protective
paper
does not Pointed in wrong
direction
Point remote to
work
remote sensor
No power Change batteries
Can't play Disc
Bad disc
Replace disc
Disc loaded incorrectly
Re-insert disc
Distortion
Disc is dirty
Clean disc
Fast forward/backward
This is normal
11

Technical
Specifications
panel
TFT
LCD
Screen size 7 Inches (16:9)
Pixel 800 X 3 (RGB) X
480
Temperature
Operation:14
oF-
122
oF;
Storage:-22
oF
-167
oF
Back
light
LED
Brightness
400 cd
1m
2
Color
system
PAL/NTSC
Playable
discs
DVD,
VCD,
CD,
MP3,
CR-R,
CD-RW,
DVD-R,
DVD-RW
Resolution
~500
S/N
~90dB
Isolation
~65dB
Audio
Input/Output
1.6V±20o/o
Video
Input/Output
1V p-p ±20%
Power
supply
DC 12V
Power
::s;
12W
Product
Dime.nsions
11"x6"x14%
Net
weight
3.71bs
Note:
The design and
specifications
are
subject
to
change
without
notice.
12

MONITOR Features :
• LED backlit panels for exceptional picture quality, high efficiency
and long life
•
Cover colors easily interchangeable between black, grey and tan
to match
vehicle interior (all 3 colors included)
• Pole distance adjustable from 4"-7" apart for universal fit
• Free
tilt mechanism allows for adjustment to optimal viewing angle
• Automatically selects PAL/NTSC system
• Built-in front 3.5mmAV input jack
• Front 3.5mm jack for headphones
• 2 A/V inputs
One 3.5mm front input jack
One wired RCA input
• Wireless remote control
• Built-in dual-channel speaker
• Built-in dual channeiiR transmitter
Ch A: 2.3MHz(left)-2.8MHz(right)
Ch B: 3.2MHz(left)-3.8MHz(right)
• 7"(16:9) TFT LCD display
• Resolution: 480(H) X 3(RGB) X 800(W)
• Number of Pixels:1,152,000
• rightness: 400 cd/m2
•
Power supply: DC +12V (1 0.6V-15.8V)
• Power consumption: 12W
•
Operating temperature:-10°C to +60°C
• Dimensions: 11" x 6" x 14 %"
• Weight: 2.9 lbs.
13

A
Warning
...,.
Read
this
manual
before
using
this
product.
...,.
This product is composed
of
precision components
and shall not be dissembled unless approved
or
authorized by us, otherwise we shall not provide any
maintenance
...,.
Protect the productfrom moisture and shock
I
~
-
-
-
~
-
-~--~~~--
,·\
I
Product
structure
"Thank you for your purchase ofour mobile video product.
To
ensure
long-term trouble free operation ofthe product, please
read_
the following
operations manual before using the monitor.
To
further ensure the long-
term service
of
your product, please have one
of
our authorized dealers
to
install this product into your vehicle for
you."

Structure
AV 2
In-----+-~
Menu------------~
Adjustment
-
-----.
Source
Select.
Power
on/off
ACCESSORIES
Description
1.
Power
Cable
2.
Pole Diameter Spacers
3. Remote Control
4. Users Manual
15
t--------
Earphone
,....-------Adjustment
+
,.....---System
Mirror
Mode
Quantity
1PC
2PCS
1PC
1PC

I
Connection
Method
Video in o
~~
Audio
Left
Input
Audio
Right
Input 0
DC+12V
~~~=~
GND
Remote
control
1.Power
On/Off
2.AV1 ,AV2 Switch
3.Adjustment+
4.Exit
5.Menu
6.Adjustment-
OSD
function
5.Menu
6.Adjustment-
. I
-
~---
---=
1.
Power/on/off
3.Adjustment+
The following menus will
appear
when pressing
"MENU"
button,press
"+"
"+"to
select the one you want.
-
OBRIGHT
20
<J
CONTRAST 20
G>
COLOR 20
1111111111111111111111111.............
......
.....
I
1111111111111111111111111
.......................· I
1111111111111111111111111
........................ I
u TINT 20
~VOLUME
20
1111111111111111111111111.............
......
.....
I
1111111111111111111111111........................
I I
MODE
16:91
I
SOURCE
IIR
ITcoN LD
I
I
LANGUAGE ENGLISH
I I
RESET
16

Install the pillow
Sound
system
ed line (+12V)
Black line (ground)
Yellow line (signal
Headrest
fig 2
The
circuit
connection
of
the
headrest
monitor
is very simple.
As shown in Fig.
Connect
the
+12V
power
of
the
sound
system(red
line to
+,black
line
to
ground),and
then
connect
the
A/V
input. Hide the connection in the base
of
seat.
Installation
1. Remove the original headrest in the car.
2. Install the
headrest
monitor.
Adjust
the steel tube in
or
out
(max. interval: 8inch;min
interval:4
inch)
according to the
interval between
pillow
holes so
that
the interval between steel
tubes
of
the
pillow
monitor
coincides
with
that
between steel
tubes
of
the original
pillow
headrest.
You can
adjust
the posts
by
pulling
or
pushing
inward
or
outward see Fig 3
17
Headrestfig 3

9855 Joe Vargas Way
S. El Monte, CA 91733
Office:626-443-8324
Toll-Free: 1-888-377-8720
Limited Warranty
a) products are warranted t9 the original ownerforone year f This warranty covers perfects
in materials and workmanship Defective products will be repaired at the
~ headquarters.
Products that are no longerin production may
be replaced with a newerversion of similardesign.
This warranty does not cover product that has been modified, subjected to abuse or neglect, damaged
by improper installation, damaged
in shipping or serviced by someone other than a ~ authorized
technician. Any damages resulting from legal action for breach
of express or implied warranties shall
be limited to the cost of the original purchase price of the video unit only. As a condition ofthis warranty.
It
is agreed that the remedy provided on this document is the sole remedy under this warranty. All
liability for coincidental damages
is excluded. Should ~ replace your product under warranty, this
replacement shall
be considered a transaction under the original warranty, and does not extend the
original warranty period. This warranty
is non-transferable.
Before returning this product for warranty service, purchaser must contact
~ to obtain a Return
Authorization Number(RA#). Purchaser must provide proof and date of product purchase. and must
include the vehicle's mileage attime ofdelivery.
- - - - - - - - - - - - - - DETACH HERE - - - - - - - - - - - - - -
PLEASE FILL IN THE INFORMATION REQUESTED AND MAIL THIS
CARD TO THE ADDRESS ON THE REVERSE SIDE.
NAME AGE
ADDRESS
CITY STATE ZIP
ESS DEALER NAME
VEHICLE INFORMATION
WHO
INSTALLED THE SYSTEM?
cos VIDEO SYSTEM?
SERIAL NUMBER