Essity TENA SmartCare Change Indicator User manual
Version EU :
en For family caregivers 02
QUICK GUIDE
TENA SmartCare Change Indicator™
322
enen
The Change Indicator is intended for use
with TENA incontinence products.
Clean the Change Indicator when fully
assembled to prevent water from
entering the device. Do not submerge in
water or clean in a washing machine.
Do not attempt to repair or modify the
Change Indicator or a gateway by
yourself.
Seek immediate medical care if the
battery is swallowed.
Keep the Change Indicator and batteries
away from children and pets.
Important information
A helping hand for you
and your loved one
The Change Indicator is designed to support you by
helping you decide when to change absorbent products
without frequent manual checks. However, it should
never replace your own judgement.
54
enen
What’s in the box
You also need (not included):
TENA
ABSORBENT
PRODUCT
SMARTPHONE
iOS 11/Android 7
or later
ADHESIVE STRIP
SENSOR STRIP, x 2
BATTERY CR2032, x 2
POWER ADAPTER
MOUNTING BRACKET
LED light
Button
GATEWAY
TRANSMITTER
Buttons
LED light
TENA SMARTCARE
FAMILY CARE APP
Start with the app
1
1.1 DOWNLOAD APP AND REGISTER ACCOUNT
Scanning the relevant QR code will take
you directly to the App Store or Google Play,
where you can download the TENA
SmartCare Family Care app.
1.2 REGISTER YOUR LOVED ONE’S PRODUCT IN THE APP
For the most accurate results, register the absorbent
product your loved one is currently using in the app.
Once you have downloaded the app, start setting
up the Change Indicator using the instruction lms
in the app or this quick guide.
To App Store (iOS) To Google Play (Android)
6 7
Steady light
= connected
Blinking light
= connecting
No light
= OK
SN (21) 000 000 000 000 000 SN (21) 000 000 000 000 000
en en
Gateway must
be within
33 ft / 10 m of
Change Indicator
CONNECT
Steady light
= connected
Blinking light
= connecting
No light
= OK
Light
Allow up to 60 seconds for the light to start blinking
and another 60 seconds for it to turn green.
On the back of the transmitter, and on the transmitter packaging, there is a
Register the transmitter
3
2.2 Consider range2.1 Connect to power outlet
Set up the gateway
2
8 9
en en
Light blinks
5 times
= OK
Press down till you
hear a click.
TOP OF
SENSOR
STRIP
Click!
Insert battery
under black tab.
Assemble the Change Indicator
4
Click!
Steady light for
a few seconds
= OK
TOP OF
SENSOR
STRIP Start at top, press down to attach
4.1 4.2 4.4
4.3
4.5
4.6 4.7
10 11
TENA Slip /
TENA Stretch Brief /
TENA Brief
TENA Pants/
TENA Underwear
TENA Slip/
TENA Stretch Brief/
TENA Brief
TENA Pants/
TENA Underwear
TENA Slip/
TENA Stretch Brief/
TENA Brief
TENA Pants/
TENA Underwear
TENA Flex
TENA Slip/
TENA Stretch Brief/
TENA Brief
TENA Pants/
TENA Underwear
TENA Slip/
TENA Stretch Brief/
TENA Brief
TENA Pants/
TENA Underwear
TENA Flex
TENA Slip/
TENA Stretch Brief/
TENA Brief
TENA Pants/
TENA Underwear
en en
FRONT
KEEP FOLDED PLACE TIGHTLYALIGN WITH THE TOP OF THE
THICKER ABSORBENT AREA
FIND THE FRONT
TENA Slip/TENA Flex
TENA Pants
Press rmly! Tight t all the way
Press rmly! Tight t all the way
FRONT
FRONT
FRONT
THICKER
ABSORBENT
AREA
THICKER
ABSORBENT
AREA
Attach Change Indicator to product
5
5.2
5.2
5.3
5.3
5.4
5.4
5.1
5.1
12 13
Apply TENA product
on the resident
en en
APPLY THE TENA PRODUCT CONSIDER CHANGEFOLLOW NOTIFICATIONSPRESS BUTTONS
In case of error notications, consult the instructions for use for more information.
Press both buttons
for 2 seconds.
Steady light for a
few seconds = OK
Press both buttons simultaeneously
for two seconds after every change.
This registers the change and
resets the system.
Use the Change Indicator
6
Apply on your loved one.
If the user is very mobile,
or ordinary underwear on top of
the Change Indicator. This will
keep it comfortably in place.
WET
– consider change
absorbent part of the TENA
product. It probably still
feels dry to the skin, but you
should consider change.
SOME URINE
– no action needed
Some urine in the absorbent
part of the TENA product.
The surface still feels dry
to the skin.
DRY
– no action needed
The absorbent part of
the TENA product is dry.
6.1 6.2 6.3 6.4 6.5
14 15
enen
Only clean when assembled.
Clean once a week or as needed.
disinfectant when needed.
Remove Change Indicator before
removing the TENA product.
Start at the top. Grip the tab, then
gently peel straight downwards.
surface when not in use.
Remember to press both buttons
simultaneously for two seconds before
or after every change. This registers the
change and resets the system.
Remove and clean
7
7.1 7.2
TENA
an Essity brand
Essity Hygiene and Health AB
www.essity.com
Ensure that you have read and understood the instructions for use before using the
TENA SmartCare Change Indicator system. The instructions for use are available
www.tena.com/SmartCare/eIFU
Contact us for support or information
www.tena.com
www.tena.com/SmartCare/eIFU
www.tena.com/SmartCare/eIFU
Table of contents
