Estate City ESTC27U User manual

Take the bike out of the carton
and carefully remove all foam
protective sheets, cable ties and
cardboard.
Screw the fender (mudguard) in at the top of the
crown fork.
Tip: Make sure that the fender isn’t rubbing against
the wheel, if it is, the fender may be screwed in too
tightly, loosen slightly and check again.
Tip: Use scissors to ensure you
don’t damage the bike.
Ensure the fork is front facing. Position
the front wheel in the fork, then tighten
the axle nuts by hand. Check that the
wheel is equally spaced between the
fork tubes, then tighten with a wrench.
Tip: Ensure the wheel
is positioned correctly
so that the fender
(mudguard) is facing
the rear of the bike.
Get Everything Out
The breaks have already been adjusted, however, if
they require some tweaking, please follow the
instruction manual.
Hit The Breaks
Get It Together Screw It
Quick Electric Bicycle (Unisex)
Model: ESTC27U
START GUIDE
1
2
3
Fender

Tip: If you can move the
handlebar or stem, they are not
tight enough.
Insert the handlebar stem in the
fork tube to the minimum
insertion line, then screw in to
secure.
Undo the handlebar clamp and
position the handlebars to the
suitable placement, tighten
securely.
The Handlebars
Undo the clamp on the seat pole tube,
then insert the seat post into the frame
to the suitable height, ensuring you
reach the minimum insertion line.
Re-clamp into position and make sure
the pole is secure – tighten it if required.
Adjust the seat to a suitable angle and
tighten the seat clamp nut.
The Seat
On the pedals, look at the end of
the spindle to find L or R. Secure
in place on the crank arm.
What? You mean this Quick Start Guide didn’t have ALL the answers?
Refer to the Instruction Manual for more information or contact our
After Sales Support on 1300 886 649.
Operating hours: Monday-Saturday, 9am-6pm AEST
Tip: The left side will be tightened
by screwing in an anticlockwise
direction.
The Pedals
Give us a call
You Made It! Now Enjoy The Ride!
45
6
Seat
clamp nut
Seat post
Min insertion
line