Estate FOLD EST-EFLDBIKE User manual

To begin assembling your bike,
remove all foam protective sheets
and cable ties and unfold the bike.
Lift up the frame quick release and
open the front frame (1A).
You should be able to hear it click
open. Once clicked, lock the quick
release (1B).
Get Everything Out
Open the folding joint then insert the stem
pillar into the fork tube up to the minimum
insertion line marked on the pillar (2A).
Face the handlebar stem forward, then
tighten the stem pillar bolts to a torque
requirement of or 17–19 N·m (2B).
Close the quick release to lock the
folding stem.
To adjust the handlebar position, please
refer to the manual (2C).
The Handlebar
Electric Folding Bicycle
Model: EST-EFLDBIKE
Look for the letters “R” or “L”
stamped on the pedal spindle (3A).
Thread the pedal marked “R” into the crank
arm on the chain side of the bike. Turn and
securely tighten the pedal spindle in a clock-
wise direction with an M15 wrench.
Repeat for pedal marked “L” ensuring you are
turning the pedal spindle in an anticlockwise
direction.
The Pedals
To assemble the saddle, loosen the
seat clamp, then insert the seat post
into the bicycle frame, making sure that
the minimum insertion mark on the seat
post is completely inserted into the
frame and not visible. At the desired
height, tighten the quick release seat
post binder bolt securely.
Adjust the seat angle to be parallel to
the ground and comfortable for the rider.
Hit the Brakes
The brakes have already been adjusted,
however, if they require some tweaking,
please follow the instruction manual.
The Seat
If you can move the handlebar
forward or backward, the clamp
bolts are not tight enough.
1A
1B
3A
4A
2A
2B
2C

To fold your electric bike, start with your
front frame. Unlock the quick release on the
frame, then release it. Lift up the quick
release until you hear it unlock, then fold the
front frame (5A).
For the handlebar, unlock the locking lever
and release it. Then push the bolt to the
side and release it from the locking
mechanism (5B).
Hold the lever in the pedal, then fold the
pedal (5C).
Finally, fold the frame and stem.
And that’s it!
Folding the Electric Bicycle
Once you’re done assembling
the bike, now it’s time to do the
rounds and check if everything
is ok.
Before riding, check if the brakes
if they are working to your
satisfaction. Check if the
seat/handlebar are secure and
not moving. Then finally, check
the chain and tyres.
Enjoy the ride!
Final Check-up
Once the bike is assembled, it is
crucial that you go back and
retighten the nuts and bolts you
secured earlier with a suitable
wrench.
Please refer to the manual
for battery charging
instructions and advice
for riding with electric
pedal assistance.
What? You mean this Quick Start Guide didn’t have ALL the answers?
Refer to the Instruction Manual for more information or contact our
After Sales Support on 1300 112 534.
Operating hours: Monday-Saturday, 9am-6pm AEST
Give us a call
You Made It!
Now Enjoy
The Ride!
Bike Electric Folding Bike
Model EST-EFLDBIKE
Warranty 1 Year
Version V1.1
Electric Folding Bicycle
Model: EST-EFLDBIKE
5A
5B
5C