ET2 E42036 User manual

C o n t e m p o r a r y
L i g h t i n g
PRODUCT NAME: LED MIRROR
ITEM NUMBER: E42036
Please consult your electrician for installing fixture and wiring.
Light Source: Integrated LED 24W
12"
12"
DIMMING:
This LED fixture is not compatible with wall dimmer switches.
Light output can only be adjusted by using the touch dimming switch on the mirror face.
1) To turn the light on or off by touching switch.
2) To adjust the brightness level of the light, once the light is on gently touch and hold the switch
from high to low brightness, release finger re touch switch to change bright from low to high, release
finger once desired brightness reached.
OFF OFF
ON
3000K
tap tap
MADE IN CHINA
Page 1 of (4)

General Lighting (Including AC LED)
BeforeGetting Started Antes decomenzar Avantde
commencer
Read the instructionscarefully priorto assembling
the product.
Lire attentivement les instructions avant d'assembler
leproduit .
Lea atentamentelas instrucciones antes de
ensamblar elproducto .
When you open the packagewithasharptool
like acutter knife, be careful not todamagethe
componentsinside.
Lorsque vous ouvrez lepaquet avecun outil pointu
commeun couteau de coupe, veillez ne pas
endommager les composants l'intérieur .
Cuando abra elpaquetecon una herramienta
afilada comoun cuchillode corte,tenga
cuidado de no dañar los componentes dentro .
Carefullyremoveall packagingmaterials and
retain for futureuse.
Retire con cuidadotodos los materiales de embalaje
y
consérvelos para usarlos enelfuturo.
Retirezsoigneusement touslesmatériaux
d’emballage et conservez-les pour un usage
ultérieur.
Keep
allhardware parts and packaging outof
reachof small children. Conserveztouteslespièces matériellesetles emballages hors deportéedes petits enfants. Mantenga todaslaspiezas yembalajes de
hardware fuera delalcancedelos niños
pequeños.
Choosea
clean,level,spaciousassembly area.
Avoid hard surfaces thatmaydamagethe
product.
Choisissezune zone d'assemblagepropre, de
niveau etspacieuse. Évitezlessurfaces duresqui
pourraient endommager leproduit. Elijaunazona de ensamblajelimpia, nivelada
yespaciosa.Evitesuperficiesduras que
puedan dañar elproducto.
Ensure thatyou haveall required contentsfor
completeassembly.
Assurez-vousquevousaveztouslescontenusrequis
pourl'assemblagecomplet .
Asegúresede quetienetodosloscontenidos
necesariosparael ensamblaje completo .
Take carewhen lifting.Assemble the productin
close
proximity towhereyouintendtopositionthe
item.
Prenezsoin de soulever. Assemblezle produit
proximitédel'endroit oùvouscomptezpositionner
l'élément.
Tengacuidadoal levantar.Ensambleel producto
cercadedonde tienela intencióndeposicionar
el artículo.
Do notovertighten thescrewsandbolts asthis
maydamagethe threads. Ne serrezpastrop les vis et les boulonscar cela pourrait endommager lesfilets. Noaprieteexcesivamentelostornillos y
pernos, yaque estopuede dañar los hilos.
Do notlet
children playwiththisproduct. No permitaque losniños
jueguen con este
producto. Ne
laissez pasles enfants joueravecce
produit.
Risk ofsuffocation!
Keepanypackaging materials awayfrom
children.
Riesgo de sofocación!Mantengalos
materialesdeembalajelejosdelosniños. Risque d’asphyxie!Tenez tousles matériauxd’emballage àl’écartdes
enfants
GENERAL Lighting
Instructions
Instrucciones de lámparas
GENERAL Instructions générales
d’éclairage
Carefully read through the
instruction sheet
before assembly and usingthe product. Lea
cuidadosamente lahojade instrucciones (si
fue
proporcionada) antesde armar y utilizar la
lámpara.
Avant de procéder l'assemblage et
l'utilisation de la
lampe,lisezattentivement le
mode
d'emploi.
Caution thereisariskofshock. Disconnect
frompower sourcebefore assembling or
cleaning.
Peligro por descargaeléctrica.Desconecte la
lámpara de la fuente de electricidad antesde
armarla olimpiarla.
Pour éviter tout risque d'électrocution,
débranchez lalampede laprise électrique
avant de procéder l'assemblage ou au
nettoyage de lalampe.
Switchoff,unplugand
allow bulbtocool
before
replacing bulbor cleaning.
Apáguela,desenchúfela ydejeque la bombilla se
enfríe antesde reemplazarla olimpiarla.
Avant de remplacer ou de nettoyer
l'ampoule,
éteignez et débranchez la
lampe,.
Only usethe recommended bulbtype and do
not exceedthe maximum wattageasit could
causefire.
Solo utilice eltipode bombillarecomendado y
no excedalapotencia eléctricamáxima yaque
puede causar un incendio.
Afin d'éviter tout risque de feu, utilisez le
type et la puissance d'ampoule
recommandés.
Do notplug the productinifcordis
tornor frayed. No conectela
lámpara sielcable eléctrico está
dañadoodeshilachado. Ne
branchez paslalampesison
cordon
d’alimentation est déchiré ou
effiloché
Cleaning &
Maintenance Limpiezay mantenimiento Nettoyageet maintenance
Onpolishedfinishes,oftenusing talc powder
reducesthe appearanceoffingerprintsand
other smudges.
Enacabados pulidos,amenudo usando
polvode talcoreducelaapariciónde huellas
dactilares yotras manchas.
Sur lesfinitions polies,souvent enutilisantla
poudre de talcréduitl’apparencedes
empreintesdigitaleset d’autrestaches.
For respectiveshade surfaces,usethe
appropriatecleansers,i.e. glasscleaner,
acrylicpolish, andwood polish.
Para lasrespectivassuperficiesdesombra,
utilicelos limpiadoresapropiados, es decir,
limpiador de vidrio,esmalteacrílicoypulido
de madera.
Pour les surfaces d’ombrage respectives,
utilisezlesnettoyantsappropriés, c’est- -dire
lenettoyantpour vitres, leVernis acrylique et
levernis bois.
Clean withsoftclothand amilddetergent.
DOnot useabrasivecleaner. Utiliceun trapo limpio,suavey secoque no
rayenimanchelasuperficiecuando quiteel
polvo.
Nettoyer avec un chiffondouxet un détergent
doux. N'utilisezpas de nettoyantabrasif.
Periodically(every 90 days) makesurethat
the screwsare fully tightened.
Periódicamente(cada 90 días)asegúrese de
que los tornillos esténbienapretados.
Périodiquement(tous les90 jours), assurez-
vous que lesvissontbienserrées.
Prolonged exposure toheatsourcesmay
cause
glazing,melting and scorching,or even
causecolor tofade.
La
exposiciónprolongada alas fuentes decalor
causa
cristalización,derretimiento,quemadura
y
decoloración deltapizado.
Siletissusubitune
expositionprolongée
auxsourcesde
chaleur,il pourrait
commencer
reluire, roussir,
s’estomperou même sedécolorer.
PG 2

Page 3 of (4)
x4
LED MIRROR
ANCHOR
WIRE NUT
SCREW
x3
x4
x1
EPT DRIVER
5.9''x1.6''x1.2''
LED DRIVER 12V 35W

Cleaning & Care:
Clean glass with household glass cleanser.
Step 4
C
Step 5
Step 2 - Step 3
A
B
WALL TEMPLATE
4PCS
4PCS
MARK
1.) Place the wall template of the
mirror on the wall in the location
selected for the mirror. Make sure the
wall template of mirror is level and in
the correct position. Secure the wall
template to the wall then mark location
of the 4 wall anchors(A) as indicated
on the template from the wall.
Remove the wall template from the
wall.
2.) Create holes on wall marks and
screw the (X4) wall anchors (A).
3.) Secure (X4) nails (B) into (X4) wall
anchors (A).
4.) Hang (X4) wall hangers (C) on the
back of mirror onto (X4) nails (B). If
mirror is not mounted parallel to floor,
repeat step 4.
5.) Plug cord into closest power outlet.
OR before step 4, cut the plug and
connect the wire with junction box
wire.
*IMPORTANT SAFETY INSTRUCTIONS
This mirror has a 3 pins plug, once the
plug is cut, the 3 core
wire(phase/neutral/ground) will be
exposed then can connect with
phase/neutral/ground which come out
from junction box
Step 1
IMPORTANT:
-Turn off the power at the main fuse or circuit breaker box before starting installation
-This mirror can be mounted over an electrical outlet box or on the wall and
plugged into an outlet
-Carefully remove all parts from the box, and place on a flat surface. Throughout
the assembly, be careful to avoid scratching the surface of the mirror.
MADE IN CHINA
Page 4 of (4)