Ethnicraft 10144 User manual

A.
Installing the Pin Shelves
ASSEMBLY INSTRUCTION FOR PIN SHELVES INSTALLATION
B.
Installing Shelves
1
2
Pin shelves
1
2
Adjustable shelves
Note :
Choose The Desired Shelf Height
(Bottom, Middle or Top)

(2X)
BELT
ANTI-TIPPING
HARDWARE ENCLOSED
(2X)
WALL SCREW
M4x50mm
A B
(2X)
SCREW
M4x20mm
C
(2X)
WASHER
M5
(2X)
WALL PLUG
S8x40mm
D E
TOOLS
SCREWDRIVER
(not included in package)
DRILLING MACHINE
(not included in package)
PENCIL
(not included in package)
A
D
C
E
B
1 2
3
4
5
ASSEMBLY INSTRUCTION FOR ANTI-TIPPING INSTALLATION
INSTALLING ANTI-TIPPING SYSTEM
AS WALL MATERIALS VARY,
THE SCREW INCLUDED ARE FOR BRICK WALL.
FOR ADVICE ON SUITABLE SCREW SYSTEMS,
CONTACT YOUR LOCAL SPECIALISED DEALER.
X1
NOTICE
INSTRUCTION
1. Install anti-tipping belt (A), washer (D) with M4x20mm screw (C) into the pre-drilled hole on the top
back frame of the item.
2. Using a 1/4" diameter drill bit, drill the wall at the same level as the anti-tipping belt (A) on the item.
Install the wall plug (E) into the hole.
3. Connect the anti-tipping belt (A) with wall screw (B) into the wall plug (E)
PRE-DRILLED HOLE
FOR SCREW

ASSEMBLY INSTRUCTION FOR ADJUSTING LEGS LEVELER
ADJUST LEVELER
LEVELER POSITION
NOTE :
THIS IS A COMPULSORY ACTION TO MAKE SURE
ALL OF THE METAL LEGS TOUCH THE GROUND!
SMB N
ASEL
YINSTRUCTIO
X1
NOTICE
UNSTABLE
STABLE