Ethnicraft OAK MADRA 51203 User manual

ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION
OAK MADRA BED - WITH SLATS
51203
51204
OAK MADRA BED - US KING SIZE - WITH SLATS 193/203/71
OAK MADRA BED - US/AU QUEEN SIZE - WITH SLATS 153/203/71
1/6

OAK MADRA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
SYMBOLS
DIRECTION NUMBER OF
PERSON NEEDED
USE HAND
SMB NAS
ELYINSTRUCTIO
X2
NOTICE
USE L KEY
TO TIGHTEN
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE )
PARTS TO BE INSTALLED
1. HEADBOARD 1pc
2. FOOTBOARD 1pc
3. SIDE RAILS 2pcs
4. MIDDLE SUPPORT 1pc
5. MIDDLE LEG 1pc
6. SLAT SUPPORTS 2pcs
7. SLATS 1set
TOOLS
HARDWARE ENCLOSED
USE WRENCH
TO TIGHTEN
USE SCREWDRIVER
TO TIGHTEN
(10X)
6 X 45 mm
JCBC SCREW
M
(4X)
6 X 20 mm
JCBC SCREW
M
(6X)
6 X 6 mm
JCBC SCREW
M
(6X)
L BRACKET
(1X)
6 X 50 mm
COUNTERSUNK
SCREW
M
(14X)
X 60 mm
JF SCREW
M5
(12X)
12 X 40 mm
DOWEL
Ø
(8X)
WASHER
M6
(8X)
NUT
M6
L KEY
(Included in package)
WRENCH
(Not included in package)
SCREWDRIVER
(Not included in package)
1
(L)
(R)
2
3
3
4
5
6
6
7
2/6

B.
INSTALLING FOOTBOARD TO SIDERAILS
A.
INSTALLING SIDE RAILS TO HEADBOARD
(R)
3
1
(L)
3
2
- USE DOWEL
- USE JCBC SCREW M6x45mm (4X)
- DO NOT FULLY TIGHTEN
Ø12x40 mm (8X)
- SCREW LOCATION ON THE BACK SIDE OF BEDHEAD
3
1
- USE DOWEL
- USE JCBC SCREW M6x45mm (6X)
-
Ø12x40 mm (4X)
DO NOT FULLY TIGHTEN
2
3
4
3
1
12
4
3
OAK MADRA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
3/6

D.
INSTALLING MIDDLE SUPPORT
C.
INSTALLING MIDDLE LEG TO MIDDLE SUPPORT
- USE COUNTERSUNK SCREW M6x50mm (1X)
- TIGHTEN FULLY
1
5
4
2
3
5mm
TO ADJUST HEIGHT
12
3
4
- USE JCBC SCREW M6x6mm (2X)
FOR STEP 2
- USE JCBC SCREW M6x20mm (4X)
FOR STEP 3
- DO NOT FULLY TIGHTEN
OAK MADRA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
4/6

E.
TIGHTEN FULLY ALL SCREWS
OAK MADRA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
F.
INSTALLING SLATS SUPPORTS
6
6
1 2
3
- USE JCBC SCREW M6x6mm (4X)
FOR STEP 2
- USE JF SCREW M5x60mm (8X)
- USE WASHER M6 (8X)
- USE NUT M6 (8X)
FOR STEP 4
- FULLYTIGHTEN
6
4
5
5/6

G.
INSTALLING SLATS
OAK MADRA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
7
- USE JF SCREW M5x60mm (6X)
- FULLYTIGHTEN
7
1
SLATS TO BE ASSEMBLED ARE NUMBER 1, 7, AND 13
2
3
H.
FINISH
6/6