Ethnicraft A079285.001 User manual

AIR BED
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
DIRECTION NUMBER OF
PERSON NEEDED
USE HAND USE L KEY
TO TIGHTEN
USE
RUBBER HAMMER
JCBC SCREW
M6 x 40mm
(4pcs)
L BRACKET
(8pcs) L KEY
(Included in package)
DOWEL Ø8
(2pcs)
DOWEL Ø12
(4pcs)
SCREWDRIVER
(Not Included in package)
KEY
(Included in package)
USE KEY
TO TIGHTEN
BOLT
(4pcs)
HALF MOON
(4pcs)
USE SCREWDRIVER
TO TIGHTEN
JCBC SCREW
M6 x 6mm
(8pcs)
X3
IN YOUR PACKAGE :
PARTS TO BE INSTALLED
ASSEMBLY INSTRUCTION
HARDWARE (AS LISTED ABOVE)
1. SIDERAIL 2pcs
2. FOOTBOARD 1pc
3. HEADBOARD RAIL 1pc
4. HEADBOARD 1pc
5. CENTER SUPPORT 1pc
6. CENTER LEG 1pc
WRENCH
(Not Included in package)
USE WRENCH
TO TIGHTEN
HARDWARE ENCLOSED TOOLS
NOTICE
SYMBOLS
JF SCREW
M6 x 50mm
(5pcs)
WASHER
M6
(4pcs)
NUT
M6
(4pcs)
1/4

3
21
A. INSTALLING SIDERAIL + FOOTBOARD + HEADBOARD RAIL
4
2
1(R)
1
(L)
3
55
- USE DOWEL (4X)
- USE BOLT (4X)
- USE HALF MOON (4X)
- DO NOT FULLY TIGHTEN
Ø12
1
2
1
2
AIR BED
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
2/4

C. CONNECTING CENTER LEG TO CENTER SUPPORT
B. INSTALLING HEADBOARD
TIGHTEN FULLY AFTER HEADBOARD INSTALLED
1
4
- USE DOWEL (2X)
- USE JCBC SCREW M6X40 (4X)
- TIGHTEN FULLY
Ø8
4
3
2
- USE JF SCREW M6x50mm (1X)
- TIGHTEN FULLY
2
1
3
AIR BED
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
3/4

D. INSTALLING CENTER SUPPORT
E. INSTALLING L BRACKET
TO ADJUST HEIGHT
1 2
1
2
4
3 4
- USE JCBC SCREW M6x6mm (2X)
- USE JF SCREW M6x50mm (4X)
- USE WASHER M6 (4X)
- USE NUT M6 (4X)
- TIGHTEN FULLY ALL SCREWS
- USE JCBC SCREW M6x6mm (6X)
- TIGHTEN FULLY ALL SCREWS
- INSTALLING L BRACKET AT THE SAME
LEVEL WITH CENTER SUPPORT
AIR BED
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
4/4