ETL mpiko User manual
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
ATTACHMENT E
USER’ S MANUAL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
Certification Information
File No. ETL.00EEL11.003-F MODEL: mpiko
Jung Myung Telecom Co,.Ltd MP3 PLAYER
ETL EMC LAB.
ETL
MP3 PLAYER Generates and uses radio freruency (RF) energy. If the equipment is not
Installed and operated in strict accordance with the manufacturer`s instructions,
Interference to radio and television recertion may result.
*Interference
This equipment complies with Part 15 of the FCC Rules and its operation is
Subject to the following conditions:
(1)The equipment may not cause harmful interference.
(2)The equipmant must accept any interference received, including that may cause
Undesired operation.
The FCC Rules, is designed to provide reasonable protection against radio and
Television interference installation. Although the equipment has been tested and
Found to comply with allowed RF emission limits, as specified in the above-cited Rulies,
There is no guarantee that interference will not occur in a particular situation.
Interference can be determined by turning the equipment off and on while monitoring
Radio or television reception. The user may be able to eliminate interference by
Implemanting one or more of the following measures:
Reorient the affected device.
Increase the distance between the affected device and computer equipment.
Plug the computer and its peripherals into a different branch circuit from that used
by the affected device.
