Sylvania SMPK4068 User manual

1
Cautions
zDo not subject the device to severe impact or drop it from high position.
zDo not use the player in extreme hot or cold, dusty or damp field. Do not
expose it to direct sunshine.
zExcessive sound pressure from earphones and headphones can cause
hearing loss.
zAvoid using the player in strong magnetic field.
zKeep the device away from water or other liquids. In the event that water or
other liquids enter the device, power off the product immediately, and clean
the device.
zDo not use chemical solution to clean the device in order to avoid corrosion.
Clean it with a dry cloth.
zWe are not responsible for the damages or lost data caused by malfunction,
misusing, repairing the device or battery replacement.
zDo not attempt to disassemble, repair or modify the product. This will

2
invalidate guarantee.
zThe design of the player or actual display may be different from what is
shown in this manual. It should be subject to the actual display or design.
1. Key Features
zMP3&WMA Player
zAVI Video player
zJPEG image viewer
zMemory card reader
zFolder Navigation
zVoice Recorder
zRemovable Storage Device
zBuilt-in rechargeable lithium-ion battery
zCustomized settings

3
2. System Requirements
zHardware: IBM PC & Compatible PC, Notebook with USB interface
zOperating System: Windows98/SE, Windows Me, Windows2000/XP,
Windows Vista
3. Package Content
zMain Unit
zStereo earphones
zUSB cable
zUser Manual
zCD with video converter
4. Before Using
4.1 Connect to a PC and download audio files
This player is plug & play for WIN2000/XP/ME/Vista OS. But for Windows98/SE,

4
you are required to install a driver before connection.
To connect it with PC for transferring files,
(1) Plug the larger end of the USB cable to the USB port of the PC, and plug the
smaller end to the USB port of the player.
(2) When the “ ” icon appear at the right bottom of the PC screen, double click
“My Computer” on the desktop, you see a removable disk which indicates the
player. Just use the removable disk as a regular local disk, copying files from
or to it.
4.2 Removing the player from the PC safely
For Windows2000/XP/ME/Vista:
(1) Left click the icon at the right hand corner of the taskbar.
(2) Click the pop-up mini-window with message of “Stop the USB Mass Storage
Device – Drive (X)”.
(3) When you are prompted to remove the device, pull out the player.
For Win98, please make sure the data transfer is completed before unplugging the

5
MP3 player.
4.3 Charge the battery
The device has a built-in lithium-icon rechargeable battery. It is charged via USB
connection. You are required to charge it when you use it for the first time. It takes
about 3 hours to fully charge the battery. Connect the larger end of the USB cable to
the USB interface of PC, and connect the other smaller end of the USB cable to the
USB interface of this player. The device is connected to PC and being charged.
NOTICE: For maximum performance, lithium-ion batteries need to be used often. If you
don’t use the device often, be sure to recharge the battery at least once per month.
4.4 Using memory card
The device has a memory card slot for reading data from a micro-SD card.
To use a memory card,

6
(1) Insert a Micro-SD card to the card slot on the unit body.
(2) Press and hold the MENU button to display the main menu.
(3) Select “Explorer” and press the MENU button to enter the folder browser mode.
(4) In the folder browser mode, you see two folders named “Internal memory” and
“Micro SD”. To play the audio or video files stored on the memory card, access the
“Micro SD” folder.

7
5. Keys Description
(1) LCD Display
(2) Earphone Jack
(3) VOL+: Increase the volume
(4) MENU: Briefly press to confirm
selection. Press and hold to
enter the main menu.
(5) PREVIOUS: Play the previous
track
(6) NEXT: Play the next track
(7) VOL-: Decrease the volume
(8) PLAY/PAUSE: Press to play,
pause or escape.
(9) Micro-SD Card slot
(10) ON/OFF: Turn on or turn off the
power.
(11) USB port

8
6. Power On/Off
To power on,
(1) Turn on the ON/OFF button.
(2) Press and hold the PLAY/PAUSE key until you see prompt on the display.
To power off,
(1) Press and hold the PLAY/PAUSE key until you see prompt on the display.
(2) Turn off the ON/OFF button. (Be sure to complete this step in order to extend the
battery life.)
Note: This player has a power-saving feature which enables the device to power off
automatically if it is idle for about 3 minutes.
7. Basic operation

9
Function Operation
Play/Pause Press the PLAY/PAUSE button to play or pause.
Adjust Volume Shortly press the VOL+/VOL- button to decrease or increase
volume.
Previous Track Shortly press the PREVIOUS button.
Next Track Shortly press the NEXT button.
Fast Forward Press and hold the NEXT button.
Rewind Press and hold the PREVIOUS button.
A-B Repeat To repeat a specified section of a track,
(1) During playing, press and hold the VOL+ button to select
the start point of the repeat.
(2) Press and hold the VOL+ button again to select the stop
point. The music section between the start point and the
stop point is repeated.

10
(3) To stop A-B repeat, press the VOL+ button.
Lock/Unlock
buttons
To protect the buttons against being pressed accidentally or
unlock buttons, hold down the MENU button and the VOL-
together.
8. Playing music
8.1 Enter the music mode
Press and hold the MENU button to display the main menu. Use the PREVIOUS/NEXT

11
button to select “Music” menu, and press the MENU button to confirm selection. Now you
are in the MUSIC mode, refer music playing to the basic operations.
8.2 Folder navigation
To navigate through folders:
(1) In the MUSIC mode, shortly press the MENU button to enter folder navigation mode.
(2) Press the PREVIOUS/NEXT button to select a folder or track, and press the MENU
button to confirm selection, or press the PLAY/PAUSE button to return.
8.3 Display lyric
To display lyric while you are listening music,
(1) Copy a lyric file in LRC format to your player. Please note that the LRC file should be
in the same directory and have the same name of the track to be listened.
(2) Play the track. Then press and hold the VOL- button to switch between lyric and ID3
display mode. In the ID3 mode, the lyric is not displayed, only ID3 information of
current track is displayed.

12
9. Playing videos
(1) Press and hold the MENU button to display the main menu.
(2) Use the PREVIOUS/NEXT button to select the “Video” menu, and press the MENU
button to enter the video player mode.
(3) Press the PREVIOUS/NEXT button to search a video file that you want to play, and
press the MENU button to play. For detail information about playing, see the “Basic
Operation” section. (Note: During playing, you can shortly press the MENU button to
enter folder navigation mode.)

13
Note This player can only play AVI videos. For other formats, you need to use the
converting tool included on the driver CD to convert them. For detail information about the
converter, see AVI Converter Quick User Guide on the CD.
Detail information for converter tool:
Before installing the AVI converter, make sure that the Windows OS is installed with
DirectX9.0 or above.
Before you download videos to the device, make sure they are AVI files and can be
played by the device. If not, convert them using the included converting tool on the driver
CD. The following steps show how to convert:
1) Install the AVI Converter
(1) Place the included CD on the CD-ROM tray of a computer.
(2) Double click the “AVI converter” folder.
(3) Run “AVI Converter CHN – EN setup.exe” to show up the following window.

14
(4) Select an installation interface language.

15
(5) Click “Next” to continue. Browse to a destination for the installation.

16
(6) Click “Install” to start installation.

17
(7) Wait for the installation to be completed before you see the following window. Click
“Finish” to finish installation.

18
2) Use the AVI converter
(1) Select “Program files” →“AVI Converter” on the Start menu to see the following

19
window.
(2) Click button to display “Conversion Setting” window.

20
(3) For the “Source File” field, specify the file that you want to convert by clicking the
button on the right. For the “Target File Path” field, specify the destination where the
converted file is saved.
(4) Set the conversion quality in the Quality field and display mode in the Aspect Ratio
filed.
(5) Click “Save” to save your setting. To convert another file, repeat the steps above.
(6) Click “close” button to close the setting window.