European Home 95 User manual

1
Element4 Gas Fireplaces EuropeanHome.com
Installing the Screens
Installation Guide
Model:
95

2
Element4 Gas Fireplaces EuropeanHome.com
SCREEN INSTALLATION
Parts included:
-(2) Flat metal tabs
-(1) “L” Shaped metal tab
-(1) “S” Shaped metal tab
-(12) Magnets
3x Tabs
6x Magnets
1x Long Screen
1x Short Screen
(magnet quantity and tab size
may vary, follow the same steps)
(Long Screen) (Short Screen)
37-3/16” W x 16-3/8” H 10-1/4” W x 16-3/8” H
For BIDORE / TRISORE the number of “Short Screens” will vary.
Please follow the installation process shown at the end of this manual.

3
Element4 Gas Fireplaces EuropeanHome.com
SCREEN INSTALLATION
Take one tab and place (2) magnets on each end
pictured on the left. Once magnet are on, place
tab under the frame/ange, about 4” away from
the top left viewable corner (see photo below).
Once installed on the top left viewable corner, the tab installed should look like the photo above. One magnet
will be holding the tab in place (not visible) and the other magnet will hold the screen to the front of the unit.

4
Element4 Gas Fireplaces EuropeanHome.com
SCREEN INSTALLATION
Please install the tab on the opposite top corner,
in this case, the top right viewable opening. After
installed, the tab should look like the photo on
the left.
Once the (2) top tabs are installed correctly, place the long screen’s (2) bottom tabs between the bottom trim and the ange.
They should fall into place without any eort or resistance.
Tilt the screen towards the top (2) tabs as shown below, magnets will catch the screen and hold it into place.

5
Element4 Gas Fireplaces EuropeanHome.com
SCREEN INSTALLATION
Here is another view of the (2) top tabs in place before the screen is tilted into position.
This is the nal view of the front long screen installed correctly.