Eurotech DynaGATE 10-06 User manual

User manual
DynaGATE 10-06
Automotive Multi-service IoT Edge Gateway - LTE Cat 1
and IP67
Rev. 0-8 — 16 September 2020 — DYGATE-10-06_Man_ENG_0-8 — ENGLISH

Trademarks
All trademarks, registered trademarks, logos, trade names, products names contained in this document
are the property of their respective owners.
Intended audience of this document
This document is intended for system integrators: skilled persons with a thorough knowledge in linking
together, physically or functionally, different computing systems and software applications to operate as a
coordinated whole in compliance with the applicable regulations.
Revision history
Revision Description Date
0-8 Updated FCC and IC information 16 September 2020
© 2020 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy

DynaGATE 10-06 User manual Rev. 0-8 Contents
CONTENTS
Trademarks 2
Intended audience of this document 2
Revision history 2
Contents 3
1 Safety instructions 7
1.1 Warning messages 7
1.1.1 Warning messages for harm to persons 7
1.1.2 Warning messages for damage to property 8
1.2 Warning: power supply safety 8
1.3 Caution: wireless safety 8
1.4 Caution: product's surfaces may become hot 8
2 Consignes de securite 9
2.1 Messages d’avertissement 9
2.1.1 Messages d’avertissement relatifs au dommage aux personnes 9
2.1.2 Messages d’avertissement relatifs aux dommages matériels 10
2.2 Avertissement: sécurité de l’alimentation électrique 10
2.3 Attention: sécurité sur la connectivité sans fil 10
2.4 Attention: les surfaces du produit peuvent devenir chaudes 11
3 How to receive technical assistance 13
3.1 How to ask for technical support 13
3.2 How to send a product for repair 13
4 Comment obtenir une assistance technique 15
4.1 Comment contacter le support technique 15
4.2 Comment retourner un produit en service après vente 15
5 Conventions used 17
5.1 Conventions for signal names 17
5.2 Conventions for signal types 17
6 Product overview 19
6.1 Product description 19
6.2 Intended use and not allowed uses of the product 20
6.2.1 Intended use 20
6.2.2 Not allowed uses 20
6.3 Technical specifications 21
6.4 Product labels 23
7 Regulatory information 25
7.1 CE marking 25
7.1.1 Safety 25
7.1.2 Packaging and packaging waste 25
7.1.3 Product disposal and recycling 25
7.1.4 WEEE compliance 25
7.1.5 RoHS 3 compliance 26
7.1.6 Directive RED 2014/53/EU 26
7.2 FCC/ISEDRegulatory Notices 28
7.2.1 FCC marking 28
7.2.2 FCC Class B Digital Device Notice 28
7.2.3 FCC restrictions on 5 GHz Wi-Fi usage 29
7.2.4 ISED Canada Regulatory Notices 29
3 / 72

Contents DynaGATE 10-06 User manual Rev. 0-8
7.2.5 ISED Class B Digital Device Notice 30
7.2.6 Canadian Representative contact information 30
7.2.7 RF Radiation Exposure Statement 30
7.2.8 Labeling Information 31
7.3 Antennas List 31
7.4 REACH compliance 32
8 Interfaces overview 33
8.1 Front Side Interfaces overview 33
8.2 LED Indicators overview 34
8.3 Service Panel and Service Interfaces 35
8.3.1 Service Panel Overview 35
8.3.2 Service Interfaces Overview 36
8 Rear Side Overview 39
8.3.1 Connectors ETH1 and ETH2 40
8.3.2 Connector M1 41
8.3.3 Connectors A1, A4, A5 42
8.3.4 Connectors A2 and A3 42
9 Features in detail 43
9.1 Wi-Fi and Bluetooth (only for versions: -33 to -37) 43
9.1.1 Wi-Fi specifications 43
9.1.2 Bluetooth specifications 44
9.1.3 BLE specifications 44
9.2 Internal mobile connectivity (only for versions: -34 to -37) 45
9.2.1 Internal modem specifications (according to product versions) 45
9.2.2 1st and 2nd MicroSIM Card holders 48
9.3 Internal GNSS (only for versions: -32 to -37) 49
9.3.1 Internal GNSS specifications 49
9.4 Digital I/Os 50
9.4.1 Insulated Digital Inputs 50
9.4.2 Insulated Digital Outputs 51
9.5 COM ports 52
9.5.1 COM specifications 52
9.5.2 Note for termination and fail safe resistors (RS-485 COM port only) 52
9.6 CAN ports 53
9.6.1 CAN specifications 53
9.6.2 Note for termination and fail safe resistors 53
9.7 Ethernet ports 54
9.7.1 Ethernet specifications 54
9.8 MicroSD card holder 55
9.9 Hardware Reset Pushbutton 55
9.10 Programmable Pushbutton 55
10 Eurotech Everyware IoT 57
10.1 Everyware Software Framework (ESF) 57
10.2 The ESF Web UI 58
10.3 The ESF Wires application 59
10.4 Everyware Cloud (EC) 60
10.5 For more information 60
11 Mechanical specifications 61
11.1 Product mechanical dimensions 61
12 How to install the product 63
12.1 Comply with safety instructions, norms and certifications 63
4 / 72

DynaGATE 10-06 User manual Rev. 0-8 Contents
12.2 How to install the product 63
13 How to manage the product power supply 65
13.1 Power supply specifications 65
13.2 How to supply power and turn ON the product 66
13.3 How to turn OFF the product 67
13.4 How to reduce the power consumption of the product 67
13.5 How to trigger a hardware reset of the product 67
14 How to maintain the product 69
14.1 How to safely remove the power supply 69
14.2 How to verify the installation of the product 69
14.3 How to clean the product 69
Notes 71
5 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 1 Safety instructions
1 SAFETY INSTRUCTIONS
IMPORTANT: Read carefully and understand the instructions and warnings contained in this
document before installing / using the product. Keep this document for future reference.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained in this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained in this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see "How to receive technical assistance" on page13).
1.1 Warning messages
1.1.1 Warning messages for harm to persons
To indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury,
the following message is used:
DANGER
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury,
the following message is used:
WARNING
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury,
the following message is used:
CAUTION
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
7 / 72

1 Safety instructions DynaGATE 10-06 User manual Rev. 0-8
1.1.2 Warning messages for damage to property
To indicate potential risks of damage to the supported product (or to other property), the following message
is used:
NOTICE
Sign
(if necessary)
Text that explains how to avoid damaging the supported product (or other
property)
1.2 Warning: power supply safety
WARNING
ELECTRIC SHOCK HAZARD
Failure to supply power correctly or to follow all operating instructions correctly, may create an
electric shock hazard, which could result in personal injury or loss of life, and / or damage the
equipment or other property.
To avoid injuries and safely supply power to the product, complete the following steps:
1. Observe all the instructions for safety, installation, and operation
2. Make sure your hands are dry
3. Make sure that all the cables to use:
a. Are in good condition
b. Meet the product requirements and comply with the relevant standards and
regulations
4. Position cables with care. Do not position cables in places where they may be trampled
or compressed
5. Make sure that the power-points and plugs are in good condition before using them
6. Do not overload the power-points and plugs
7. Make sure that the product maintains a proper grounding connection
8. Use a power supply that meets the product requirements and complies with the relevant
standards and regulations. In case of uncertainties, contact the Eurotech Technical
Support Team (for more information see "How to receive technical assistance" on
page13)
9. Connect power after the installation of the system has been completed
10. Never connect or disconnect the cables with the system or the external apparatus
switched ON.
1.3 Caution: wireless safety
CAUTION
The antennas used with the product must be installed with care, avoiding any interference with
other electronic devices and keeping a distance from persons greater than 20 cm. If these
requirements cannot be satisfied, the system integrator has to assess the final product with
respect to SAR regulations.
1.4 Caution: product's surfaces may become hot
Depending on the operating environment temperature, product's surfaces may become hot, creating a burn
hazard. Always allow the product's surfaces to cool before touching them.
8 / 72

DynaGATE 10-06 User manual Rev. 0-8 2 Consignes de securite
2 CONSIGNES DE SECURITE
IMPORTANT: Lire attentivement et bien respecter les instructions et les avertissements contenus
dans ce document avant d'installer / d'utiliser le produit. Conserver ce document pour s'y référer
à l'avenir.
Pour éviter les risques de blessures, de choc électrique, d'incendie ou de détérioration du matériel, bien
suivre les instructions et les avertissements contenus dans ce document.
Le non-respect des instructions et des avertissements contenus dans ce document constitue une violation
des normes de sécurité, de conception, de fabrication et d'utilisation prévue du produit.
Eurotech rejette toute responsabilité pour les dommages causés en cas de non-respect des instructions et
des avertissements contenus dans ce document.
En cas de doute sur la compréhension de ce document, contacter le Support Technique d’ Eurotech (pour
plus d’informations voir "Comment obtenir une assistance technique" page 15).
2.1 Messages d’avertissement
2.1.1 Messages d’avertissement relatifs au dommage aux personnes
Pour signaler une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou un
préjudice grave le message suivant est utilisé:
DANGER
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner la
mort ou un préjudice grave le message suivant est utilisé:
AVERTISSEMENT
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
Pour signaler une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner un
préjudice mineur ou modéré le message suivant est utilisé:
ATTENTION
Signal
(si besoin)
TEXTE EXPLIQUANT LE DANGER ET SES CONSÉQUENCES.
Texte expliquant comment éviter ce danger.
9 / 72

2 Consignes de securite DynaGATE 10-06 User manual Rev. 0-8
2.1.2 Messages d’avertissement relatifs aux dommages matériels
Pour signaler les risques potentiels de détérioration du produit (ou des produits annexes), le message
suivant est utilisé:
AVIS
Signal
(si besoin)
Texte expliquant comment éviter d'endommager le produit (ou des produits
annexes)
2.2 Avertissement: sécurité de l’alimentation électrique
AVERTISSEMENT
RISQUE DE CHOC ÉLECTRIQUE
Une alimentation électrique incorrecte peut créer un risque de choc électrique, pouvant
entraîner des blessures corporelles ou la perte de vies humaines, et / ou endommager le
produit ou d'autres biens.
Pour éviter les blessures et brancher l'appareil en toute sécurité, procéder comme suit:
1. Respecter toutes les consignes de sécurité, d'installation et d'utilisation
2. S'assurer que les mains sont sèches
3. S'assurer que tous les câbles utilisés:
a. Sont en bon état
b. Répondent aux exigences du produit et soient conformes aux normes et
réglementations en vigueur
4. Positionner les câbles avec soin. Ne pas les placer dans des endroits où ils risquent
d'être piétinés ou comprimés
5. S’assurer que les prises de courant et les connecteurs d’alimentation sont en bon état
avant de les utiliser
6. Ne pas surcharger les prises de courant et les connecteurs d’alimentation
7. S'assurer que le produit est correctement relié à la terre
8. Utiliser une alimentation électrique conforme aux exigences du produit et conforme aux
normes et réglementations en vigueur. En cas d'incertitude, contacter l'équipe
d'assistance technique d'Eurotech (pour plus d'informations, voir "Comment obtenir une
assistance technique" page 15)
9. Ne Brancher l'alimentation électrique qu’une fois l'installation du système terminée
10. Ne jamais brancher ou débrancher les câbles lorsque le système ou un appareil
périphérique sous tension.
2.3 Attention: sécurité sur la connectivité sans fil
ATTENTION
Les antennes utilisées avec le produit doivent être installées avec soin, en évitant toute
interférence avec d'autres appareils électroniques et à au moins 20 cm des personnes. Si ces
exigences ne peuvent être satisfaites, l'intégrateur du système doit évaluer le produit final par
rapport à la réglementation SAR.
10 / 72

DynaGATE 10-06 User manual Rev. 0-8 2 Consignes de securite
2.4 Attention: les surfaces du produit peuvent devenir chaudes
Selon la température ambiante lors de l’utilisation, les surfaces du produit peuvent devenir brûlantes,
engendrant un risque de brûlure. Laisser toujours les surfaces du produit refroidir avant de les
toucher.
11 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 3 How to receive technical assistance
3 HOW TO RECEIVE TECHNICAL ASSISTANCE
3.1 How to ask for technical support
To ask for technical support, complete the following steps
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit a support request
3. Wait for the reply from the Support Team with the information you required
3.2 How to send a product for repair
Any product returned to Eurotech, that is found to be damaged due to inadequate packaging, will
not be covered by the warranty.
To send a product for repair, complete the following steps:
1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/
2. Submit an RMA request
3. Wait for the reply from the RMA Department. It will contain:
lThe RMA number
lThe shipping information
4. Pack the product adequately using anti-static material and place it in a sturdy box with enough
packing material to protect it from shocks and vibrations
5. Ship the product to Eurotech following the information received from the RMA Department.
13 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 4 Comment obtenir une assistance technique
4 COMMENT OBTENIR UNE ASSISTANCE TECHNIQUE
4.1 Comment contacter le support technique
Pour demander un support technique, procéder comme suit:
1. Se connecter au Support Eurotech sur: https://support.eurotech.com/
2. Envoyer une demande d’assistance
3. Attendre la réponse de l'équipe de support avec les informations requises
4.2 Comment retourner un produit en service après vente
Tout produit renvoyé à Eurotech, qui se trouve endommagé en raison d'un emballage inadéquat,
ne sera pas couvert par la garantie.
Pour retourner un produit en Service Après Vente, procéder comme suit:
1. Se connecter au Support Eurotech sur: https://support.eurotech.com/
2. Faire une demande de RMA
3. Attendre la réponse du service RMA qui indiquera:
lLe numéro de RMA
lLes informations pour l’expédition
4. Emballer le produit de manière adéquate en utilisant des protections antistatiques et le placer dans
un conditionnement solide contenant suffisamment de matériau d'emballage pour le protéger des
chocs et des vibrations
5. Expédier le produit chez Eurotech selon les informations reçues par mail.
15 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 5 Conventions used
5 CONVENTIONS USED
5.1 Conventions for signal names
Convention Description
GND Ground
#Active low signal
+Positive signal; Positive signal in differential pair
-Negative signal; Negative signal in differential pair
3.3 3.3 V signal level
55 V signal level
NC No Connection
Reserved Use is reserved to Eurotech
5.2 Conventions for signal types
Convention Description
ISignal is an input to the system
OSignal is an output from the system
IO Signal may be input or output
PPower and Ground
AAnalog signal
NC No Connection
Reserved Use is reserved to Eurotech
17 / 72

(This page has been intentionally left blank)

DynaGATE 10-06 User manual Rev. 0-8 6 Product overview
6 PRODUCT OVERVIEW
6.1 Product description
The DynaGATE 10-06 is a Multi-service IoT Edge Gateway, designed to deliver LTE connectivity with
2G/3G fallback to automotive and lightly rugged applications.
It is based on the NXP i.MX 6UltraLite Cortex-A7 processor family, with 512MB of RAM, 4GB of eMMC,
and a user-accessible MicroSD and dual Micro-SIM slots.
The DynaGATE 10-06 offers the following wired connectivity capabilities: 2x Fast Ethernet, 2x CAN bus,
2x USB 2.0 for maintenance, 1x Ignition Key Input (surge protected), 1x Isolated Digital Input, 1x Isolated
Digital Output, 1x Isolated Odometer Input, 1x Isolated Forward Input; it also includes the following serial
ports (not isolated, surge protected): 1x RS-485, 1x RS-232.
It also offers a wide range of wireless connectivity capabilities1: it can integrate an internal LTE Cat 1
modem (2G/3G fallback) with dual Micro-SIM support, 802.11 b/g/n Wi-Fi, and Bluetooth 4.2 BLE; an
internal 72-channel GNSS provides precise geolocation capabilities.
A rechargeable internal 2000 mA/h battery provides uninterrupted operation for up to 5 minutes in case of
power failure and permits a safe shutdown.
The DynaGATE 10-06 comes with a genuine Oracle Java SE Embedded 8 Virtual Machine and Everyware
Software Framework (ESF), a commercial, enterprise ready edition of Eclipse Kura, the open source
Java/OSGi middleware for IoT Edge Gateways.
Distributed and supported by Eurotech, ESF adds advanced security, diagnostics, provisioning, remote
access and full integration with Everyware Cloud (EC), Eurotech IoT Integration Platform (separately
available).
For further details visit www.eurotech.com.
Figure 6.1 - The DynaGATE 10-06 rear view
1The features availability depends on the product versions
19 / 72

6 Product overview DynaGATE 10-06 User manual Rev. 0-8
6.2 Intended use and not allowed uses of the product
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
6.2.1 Intended use
The DynaGATE 10-06 is a Multi-service IoT Edge Gateway, designed to deliver LTE connectivity with
2G/3G fallback to automotive and lightly rugged applications.
The DynaGATE 10-06 must:
lBe installed in a secured location, only accessible to authorized personnel (for example in a cabinet
/ technical compartment), and not exposed to atmospheric agents
lBe used indoors, in industrial or automotive* applications
lBe used with appropriate interconnecting and power cables
lBe used with an external DC power supply source that:
oMust meet the requirements stated on the identification label of the product
oMust deliver a maximum current of 2 A
lInclude an external 2 A fuse on the line coming from the negative terminal of the DC power source.
* For DynaGATE 10-06 versions -33 to -37: before using the DynaGATE 10-06 in automotive applications
in any EU Member State, switch-off the Wi-Fi band: 5150 - 5350 MHz.
6.2.2 Not allowed uses
Do not use the DynaGATE 10-06:
lIn railway applications
lIn defence applications
lOutdoors
lIn safety-critical applications
lIn environments with potentially explosive atmospheres
lExposed to water, chemical agents, and UV
lIf not installed according to the instructions and warnings contained in this document.
When used in automotive applications in any EU Member State, do not use the DynaGATE 10-06,
versions -33 to -37, with the Wi-Fi band: 5150 - 5350 MHz enabled.
20 / 72