Everdure RBES612 Guide

INSTALLATION, OPERATION
& MAINTENANCE INSTRUCTIONS
FOR EVERDURE RANGE HOOD
Model:
RBES612

EASY DECISION
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
FOR EVERDURE RANGE HOOD
RBES612
CONGRATULATIONS
Welcome to the Everdure Kitchen Community and thank you for choosing one of our many fantastic cooking
appliances. We are confident that you will now be able to meet your cooking needs. Before you use the
cooktop we strongly recommend that you read though the whole user manual which provides the description of
this product and the proper use of its functions. To avoid the ever-present risks involved with using an electrical
appliance it is vital that the appliance is installed correctly and that you read the safety instructions carefully to
avoid misuse and hazards.
It is important that you retain these instructions and your proof of purchase along with any other important
documents about this product for future reference. Due to continual product development, Everdure reserves
the right to alter specifications or appearances without notice.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ..........................................................................................................................1
APPLIANCE DETAILS....................................................................................................................................................2
WHAT IS SUPPLIED......................................................................................................................................................2
WHAT MAY BE NEEDED FOR INSTALLATION ..............................................................................................................2
INSTALLATION INSTRUCTIONS................................................................................................................................ 3-4
OPERATING INSTRUCTIONS........................................................................................................................................4
LEDS ............................................................................................................................................................................5
CLEANING ...................................................................................................................................................................5
TROUBLESHOOTING ...................................................................................................................................................5
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference.
Due to continual product development, Everdure reserves the right to alter specifications or
appearances without notice.
Remove all packaging and dispose responsibly – recycle where facilities are available.

1
EASY DECISION
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before
removing the contents of this carton.
1. In certain circumstances electrical appliances may be a safety hazard.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
3. Do not check the status of the filters whilst the cooker hood is operating.
4. Do not touch the light bulbs after use.
5. Do not disconnect the appliance with wet hands.
6. Do not disconnect the power supply by pulling on the cable.
7. Do not flambé underneath the range hood.
8. Avoid free flame, as it may cause damage to the filters and can be a fire hazard.
9. Unplug the appliance before carrying out maintenance, cleaning or replacing lamps.
10. If the power cord is damaged, it must be replaced by the manufacturer, an authorised service centre or
similarly qualified persons to avoid a hazard.
11. For indoor use only.
12. It is recommended to operate the range hood prior to cooking.
13. It is recommended to leave the range hood in operation for 15 minutes after cooking is terminated in
order to completely eliminate cooking vapours and odours.
14. Turn off the range hood when not in use.
15. Do not use the range hood if it is damaged, especially the supply cord and the case.
16. Do not immerse the range hood in liquid.
17. The exhaust air must not be discharged into a flue which is used for exhausting fumes from an
appliance burning gas or other fuels (not applicable to appliances that only discharge the air back into
the room).
18. Regulations concerning the discharge of air have to be fulfilled.
19. There shall be adequate ventilation of the room when the range hood is used at the same time as
appliances burning gas of other fuels (not applicable to appliances that only discharge the air back into
the room).
20. Clean the surface of the cooker hood regularly using a cloth moistened with denatured alcohol or a
non-abrasive liquid detergent.
21. There is a fire risk if cleaning is not carried out in accordance with the instructions.
22. The 600mm units are intended for use above hobs that are 600mm wide and the 900mm units are
intended for use above hobs that are 900mm wide.
23. The range hood must be mounted at a minimum distance of 65cm above the cooking surface.
24. CAUTION: Accessible parts may become hot when used with cooking appliances.
25. Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards.

2
EASY DECISION
APPLIANCE DETAILS
Voltage:
220-240V ~50Hz
Lamp Max:
1 x 2W E14 LED
Rated Input Power:
77W
General Information
Before installing and operating the rangehood, carefully read the
following important information regarding installation safety and
maintenance. Keep this information booklet accessible for further
consultations. The appliance has been designed to exhaust cooking
fumes externally, or it may be used as a re-circulating rangehood
(Filters required for recirculating type).
Before installation, please ensure that the following have been
supplied and that the tools listed below are readily available.
WHAT IS SUPPLIED
•Rangehood (including plug (re-circulating) and one way
valve (flued)) x 1
•Installation kit (bolt x 4, washer x 8, screw x 4, nut x 4,
plastic wall plug x 4) x 1
•Instruction booklet x 1
NOTE: Parts needed for the ducted option must be purchased separately.
WHAT MAY BE NEEDED FOR INSTALLATION
Electric Drill
Duct Tape
Tape Measure
Jig Saw
Spirit Level
Ladder
Screwdrivers
Torch (if natural lighting is minimal)

3
EASY DECISION
INSTALLATION INSTRUCTIONS
Please ensure that that all power is switched off before installing the rangehood. Installation must be in
accordance to the local electrical authority and codes. The switched power outlet for the rangehood should be
positioned to enable the user to turn the power off, to enable cleaning and any maintenance required.
The switched power outlet should be installed within 600mm from the rear of the appliance. Ensure that when
installing the rangehood, that it is protected from any possible damage from tools etc. Ducting for this
appliance must be installed in accordance to the local authority. Ensure that the fixings used for this rangehood
are suitable. Check the area where the rangehood is to be fitted, to ensure that it is structurally sound. Please
see diagram below for switch location for re-circulating or for venting outdoors.
The Everdure RBES612 rangehood is intended to be fitted into kitchen cabinetry. It can also be installed directly
onto a wall if required.
INSTALLATION OF THE EVERDURE RBES612 RANGEHOOD DIRECTLY TO A WALL
Ensure that the wall is structurally sound, and is capable of carrying the weight of the rangehood. The lowest
point of the rangehood must be placed at a minimum of 650mm away from the cooking surface of a gas or
electric cooktop. The cooktop may require a different minimum distance; the greater minimum distance must
be followed.
Measure the distance between the two fixing holes on the back of the appliance. Due to manufacturing
processes, there may be slight variations on each rangehood produced.
Mark the distance on the wall in the desired location, at the correct distance above the cooktop.
For timber framed houses, the rangehood should be attached to a wall stud. Drill holes of a suitable size to fix
the screws into, which will take the weight of the rangehood. Using a screwdriver, attach the screws to the studs
in the pre drilled holes, leaving an adequate amount for the rangehood to rest on. Locate the rangehood onto
the screws, via the mounting holes in the back of the appliance.
For masonry walls, mark the position of the holes on the wall, and drill holes of a suitable size, to accept the size
of masonry anchor to be used. Alternatively, a wall plug of a suitable size may be fitted. Fit the masonry anchor
(if being used) into the hole, or if using wall plugs, attach a screw into the plug. Allow an adequate amount of
the screw or anchor out for the rangehood to be fitted onto. Locate the rangehood onto the anchor or the
screw, via the mounting holes in the back of the appliance.
Fit the one-way valve onto the rangehood, ready for the ducting to be installed.

4
EASY DECISION
INSTALLATION INSTRUCTIONS
INSTALLATION OF THE EVERDURE RBES612 RANGEHOOD TO A CABINET
The diagram below shows the distance required between the holes in the top of the rangehood. Due to
manufacturing procedures, it is recommended that the dimension be checked on the rangehood before
installing.
Drill the 4 x 6mm diameter holes into the bottom of the cupboard.
Fit the one-way valve onto the rangehood, ready for installation of the ducting.
Install the rangehood to the bottom of the cupboard using the 35mm bolts & nuts supplied with the
rangehood. The holes in the rangehood are already threaded. Fully tighten the bolts.
OPERATING INSTRUCTIONS
Note: Before the appliance can be operated, it must either be ducted or, if the model is installed as a
recirculating rangehood, it must be fitted with charcoal filters.
Connect the plug into the power.
Below is a diagram of the light and fan functions, with an explanation of how the light and the fan
functions operate.
To operate the light, push the switch ①into “1” position to switch the light on, or into “0” to turn the light off.
To operate the fan, push the switch ②onto either:
1 – Low Fan Speed
2 – Medium Fan Speed
3 – High Fan Speed
0 – To turn the fan Off.
If your rangehood does not function correctly when attempting any of the above, please ensure that your
power is on and functioning correctly. If the power seems to be functioning correctly in the house, there may be
a problem with the rangehood. Please call your authorised service centre in this case to organise a service call
or replacement appliance.

5
EASY DECISION
LEDS
Warning: Before attempting to replace the light, ensure that the
appliance is switched off and unplugged from the wall socket. Ensure
the bulb is cool before handling.
•Open the grease filter support grill.
•Find the bulb at the rear of the unit.
•Turn the light bulb carfully and replace it with a similarly rated
light bulb:
oType: E14 LED
oMax Wattage: 2W
oVoltage Range: 220 – 240V AC
oILCOS D Code: DR-2/30-H-E14-35
•Replace the grease filter support grill.
CLEANING
SAFETY PRECAUTION
Before cleaning your rangehood or performing any maintenance, please ensure that the rangehood is turned
off at the power point.
Do not use abrasive cleaners to clean the rangehood. The use of warm soapy water and a cloth are
recommended.
Ensure that the rangehood is cleaned regularly, as a build-up of grease and fat may occur otherwise.
The filters on the rangehood must be cleaned regularly to maintain efficiency, and prevent grease build up. It is
recommended that this is undertaken every 4 – 6 weeks, depending on frequency of use.
The filters can be cleaned with warm soapy water or a cloth.
Cleaning of the rangehood must be performed as described above; otherwise there is a possibility of a fire
hazard due to grease and fat build up.
If the rangehood is fitted with charcoal filters (for re-circulating) it is recommended that the filters be changed
every 3 – 4 months. Filter replacement will ensure correct function of the rangehood, and ensure that the air
being re-circulated back into the room is clean.
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
Fan switch turned off Select a fan switch position.
Fan switch failed Contact Service Department.
Motor failed
Contact Service Department.
Light does not
work, motor does
not work
House fuses blown Reset/Replace fuses.
Power cord loose or disconnected
Refit cord to power outlet.
Switch power outlet on.
Oil leakage
One way valve and the air ventilation entrance
are not tightly sealed
Take down the one way valve and seal with
sealant.
Leakage from the connection of U-shaped
section and cover
Take U-shaped section down and seal.
Lights not working
Broken/Faulty globes
Contact Service Department.
Insufficient suction
The distance between the range hood and the
gas top is too far
Refit the range hood to the correct distance.
The Range hood
inclines
The fixing screw not tight enough
Tighten the hanging screw and make it
horizontal.
NOTE: Any electrical repairs to this appliance must conform to your local, state and federal laws. Please contact
the service centre if in any doubt before undertaking any of the above. Always disconnect the appliance from
the power source when opening the appliance.

EASY DECISION
A division of Shriro Australia Pty Ltd
104 Vanessa Street, Kingsgrove NSW 2208
AUSTRALIA: 1300 355 541
www.everdure.com
NEW ZEALAND: [phone]
www.everdure.co.nz
IM Ref: RBES612 v3 13/06/2019
FOR INDOOR USE ONLY