EverFocus EHA1280 eZ.HD Series User manual

EHA1280 eZ.HD Series
1080p Dual Power FHD IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained
in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: [phone] FAX: [phone] www.everfocus.com.tw

1. Introduction
Equipped with a 1080p Sony STARVIS CMOS sensor, the EHA1280 deliver 1080p
full HD image quality. The model provides 2.8-12mm lens with ICR. Featured with
Digital Wide Dynamic Range (D-WDR), the camera can provide clear images even
under backlight circumstances where intensity of illumination can vary
excessively. The EHA1280 supports dual power (12VDC / 24VAC) and supports
both NTSC and PAL scanning systems.
1.1 Packing List

Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1

Screw & Screw Anchor x 4
Desiccant Bag x 1
User Manual x 1
1.2 Features
1080p Sony STARVIS CMOS sensor, delivering amazing high sensitivity
Varifocal 2.8-12mm with ICR to capture the desired field of view
Extended IR range of up to 30m / 98ft. with 4 LEDs (depends on scene IR
reflectivity)
D-WDR to improve the visibility under high contrast scene
3-Axis rotation design allows wall or ceiling mounting
IP66-rated with metal housing
Supports dual power (12VDC / 24VAC)
Supports UTC function: Control camera OSD settings directly from DVR end
1.3 Dimensions
142mm / 5.59"
142mm / 5.59"

2
1.4 Optional Accessory
Type
Wall Mount Bracket
Image
Model
BA-EB45
BA-EB28
BA-EB18
Color
White / Metal
White / Metal
White / Metal
Size
(WxDxH)
245x160x163mm
9.65”x6.3”x6.42”
140x136x233mm
5.51”x5.35”x9.17”
120x207x134mm
4.72”x8.15”x5.28”
Weight
2.1kg / 4.63lb
2.1kg / 4.63lb
1.1kg / 2.43lb
Type
Ceiling Mount Bracket
Image
Model
BA-EB3A
BA-EB3B
Color
White / Metal
White / Metal
Size
(WxDxH)
136x136x243mm
5.35”x5.35”x9.57”
136x136x443mm
5.35”x5.35”x17.44”
Weight 2.4kg / 5.29lb 3.6kg / 7.94lb
1.5 Cable Description
12VDC / 24VAC Power Cable
Video Output Cable (BNC, 75Ohm)
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw
positions. Drill four holes on the surface and insert the supplied 4 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 4 screw area.

3
2. To mount the camera to the surface:
a. Remove the Base Plate from the camera. To do so, 1) Remove the Fix
Screw 2) Slightly push the Base Plate backward from the Fix Screw side
and then pull out the Base Plate. Screw the Base Plate to the surface using
the supplied 4 Screws.
Fix Screw
Base Plate
Push
Pull
Screws
Base Plate
b. Open the Camera Cover to remove the old desiccant bag from the Camera
Body and stick the supplied Desiccant Bag inside the Camera Body. It’s
highly recommended to replace the desiccant bag every time when you
open the Camera Cover.
c. For the first time installation, check whether the camera is properly
focused. If not, you can optionally adjust camera zoom and focus by
adjusting the Zoom Screw or Focus Screw using a slotted screwdriver.
Zoom Focus
Note: Please screw back the Camera
Cover immediately in case of reducing
the absorption capacity of the desiccant
bag inside the camera body.

4
d. Attach the Camera Body to the Base Plate. Screw back the Fix Screw.
Base Plate
Camera Body
Fix Screw
3. Connect the Power Cable to a 12VDCpower source. Connect the Video
Output Cable to a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings or
switch to different video formats. Remove the Protection Cap from the
Joystick before using it.
UP
DN
Switching Video Format:
•Push the joystick up for 5 sec. to switch to AHD.
•Push the joystick right for 5 sec. to switch to TVI.
•Push the joystick down for 5 sec. to switch to CVI.
•Push the joystick left for 5 sec. to switch to CVBS.
Configuring OSD Settings:
•Push the Joystick up / down to select among
menu items.
•Push the Joystick left / right to adjust the level of
the selected item.
•Press the Joystick to enter the submenu or exit
the OSD Setup Menu.
5. You can optionally adjust the camera angles. To do so, unscrew the 4 cover
screws using the supplied L-Type Wrench and then remove the cover. Adjust
the camera angles (Tilt: 60°, Pan: 350°, Rotate: 350°). After adjusting camera
angles, screw back the camera cover.
350°
350°
60°

5
3. Configuration in the OSD Menu
You can configure camera settings in the OSD menu from DVR end.
No Main
Sub
Menu
Sub Menu / Function
1
Iris
ELC
2 Focus Adj.
Off
On
Focus Area
Wide / Narrow / Middle
DISP Tone
0-2
DISP H_POS
0-60
DISP V_POS
0-34
DISP H_Size
0-60
DISP V_ Size
0-34
3 Exposure
Brightness
0-20
Shutter
Auto
Normal / Deblur
Manual Speed
1/30, 1/60, 1/1 20, 1/2 40, 1/4 80,
1/1000, 1/2000, 1/4000, 1/8000,
1/1 5000, 1/30000
Flicker
Sens-Up
Off, x2, x4, x8, x16, x32
AGC
0-10
4 Backlight
Off
HLC
Mode
Night Only / All Day
Level
0-20
Color
BLK / CUSTOMIZE / WHT / YEL / CYN / GRN /
MAG / RED / BLU
BLC
H-POS
0-20
V-POS
0-20
H-Size
0-20
V-Size
0-20
WDR Mode
Normal
ROI
Window Zone
0-3
Window Use
On / Off
H-POS
0-1920
V-POS
0-1080
H-Size
0-1920
V-Size
0-1080
Weight
Middle / High / Low
5 Day&Night Auto Mode
Auto
IR LED
On / Off
Anti-Sat.
0-20
LED Power
Dimming
AGC Thres
0-20
AGC Margin
0-20
Delay
Middle / High / Low
Color
White LED
On / Off
Anti-Sat.
0-20
LED Power
Dimming
AGC Thres
0-20
AGC Margin
0-20
Delay
Middle / High / Low
B&W
IR LED
On / Off

6
Anti-Sat.
0-20
LED Power
Dimming
AGC Thres
0-20
AGC Margin
0-20
Delay
Middle / High / Low
Extern
IR LED
On / Off
Anti-Sat.
0-20
LED Power
Dimming
Extern SW
High / Low
D > N Thres
0-20
N > D Thres
0-20
Delay
Middle / High / Low
6 Color AWB
Auto
Autoext
Preset
Manual
C-Temp
3000K / 5000K / 8000K
R-Gain
0-20
B-Gain
0-20
Color Gain
0-20
7
DNR
Middle / High / Off / Low
8 Image
Sharpness
CVBS
0-10
CVI
0-10
TVI
0-10
AHD
0-10
Gamma
0.45 / 0.55 / 0.65 / 0.75
Mirror
On / Off
Flip
On / Off
ACE
Off / Low / Middle / High
Defog
Off
On
Mode
Manual / Auto
Level
Low / Middle / High
Privacy
Off
On
Zone Num
0-15
Zone DISP
On / Off
H-POS
0-60
V-POS
0-34
H-Size
0-60
V-Size
0-34
Y-Level
0-20
CB Level
0-20
CR Level
0-20
Trans
0 / 1 / 2 / 3
9 Motion
Off
On
Det
Window
Window
Zone
0 / 1 / 2 / 3
Window
Use
On / Off
Det H-POS
0-60
Det V-POS
0-34
Det H-Size
0-60
Det V-Size
0-34
Det Tone
0 / 1 / 2 / 3 / 4

7
Mdrect Fill
On / Off
Sensitivity
0-10
Motion
OSD On / Off
Text Alarm
On / Off
Signal Out
On / Off
10 System
Output
Mode
HD Output
Off / CVBS / CVI / TVI / AHD
Frame Rate
1080 25P(30P) / 720 25P(30P) / 720 50P(60P)
Freq.
50HZ / 60HZ
Confirm
YES
Image
Range
Full
Comp
User
Offset
0-32
Color
Space
HD-CbCr / YUV / SD-CbCr
Color Bar
On / Off
Language
ENG / CHN / CHN(S) / JPN / KOR / POR
Cam Title
Off
Right Up
Left Down
Reset