evoheat Evo Fusion-i User manual

[e-mail]
1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 0

[email protected]om.au
1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 1
Contents
1. Introduction...............................................................................................................................................2
2. Dimensions...............................................................................................................................................3
3. Quick Start Guide.....................................................................................................................................4
4. Safety Instructions....................................................................................................................................6
5. Installation................................................................................................................................................7
5.1 System Installation..............................................................................................................................7
5.2 Location of Installation ........................................................................................................................7
5.3 Airflow Clearances..............................................................................................................................8
5.4 Adequate Water Flow..........................................................................................................................8
5.5 Rubber Feet........................................................................................................................................8
5.6 Condensate Drain Barb.......................................................................................................................8
5.7 Drainage & Condensation...................................................................................................................8
5.8 Plumbing.............................................................................................................................................9
5.9 Electrical Connection ..........................................................................................................................9
5.10 Initial Start-Up...................................................................................................................................9
6. Operation................................................................................................................................................10
6.1 The Controller...................................................................................................................................10
6.2 Operating Functions..........................................................................................................................11
6.2.1 Startup & Shutdown....................................................................................................................11
6.2.2 Switching Modes ........................................................................................................................11
6.2.3 Setting the Target Temperature..................................................................................................11
6.2.4 System Time Settings.................................................................................................................12
6.2.5 Timer Settings ............................................................................................................................12
6.2.6 Silent Settings.............................................................................................................................13
6.2.7 Keyboard Lock............................................................................................................................14
6.2.8 Fault Interface.............................................................................................................................14
7. Troubleshooting......................................................................................................................................15
7.1 Electronic Control Fault Table...........................................................................................................15
7.2 Frequency Conversion Board Fault Table.........................................................................................16
8. Appendix ................................................................................................................................................17
8.1 Wiring Diagrams................................................................................................................................17
8.2 Parameter List...................................................................................................................................19
8.3 Refrigerant Saturation Temperature..................................................................................................19
8.4 Cable Specifications..........................................................................................................................20
9. Maintenance...........................................................................................................................................21
9.1 F.A.Q ................................................................................................................................................21
9.2 Advanced..........................................................................................................................................22
10. Warranty...............................................................................................................................................25

[email protected]om.au
1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 2
1. Introduction
This manual contains information relating to the installation, troubleshooting, operation, and maintenance of this
EvoHeat unit. Instructions in this manual must always be followed. Failure to comply with these recommendations will
invalidate the warranty. Should you have any questions or require technical support, call the EvoHeat office on 1300
859 933 to speak to our team.
The Evo Fusion-i heat pump is the ideal choice for recreational pool & spa
owners looking to extend their swim season with minimal running costs.
Designed with the latest technology including stepless full DC inverter
compressors, fans, and control systems the Evo Fusion-i is the energy
efficient and environmentally friendly way to enjoy a longer swim season.
TECHNICAL DATA
Fusion-i 7
Fusion-i 9
Fusion-i 12
Fusion-i 16
Fusion-i 19
Heat output at 27°C air/26°C water
kW
7.24
9.00
11.66
16.00
18.70
Heat output at 15°C air/26°C water
kW
5.64
7.00
8.62
12.60
14.00
Cooling output at 35°C air/30°C water
kW
3.35
4.22
5.01
8.52
10.21
C.O.P. at 27°C air
12.13-5.66
12.39-5.84
12.57-5.84
10.83-5.50
10.94-5.12
Consumed power
kW
0.15-1.28
0.18-1.54
0.16-2.00
0.30-2.91
0.32-3.65
Power Supply
220-240/1/50
Max current per phase
A
6.4
8.4
10.9
16.6
17.5
Connection type
10amp
10amp
15amp
hard wired
hard wired
Fan quantity
1
1
1
1
1
Fan speed
RPM
400-700
400-800
400-800
400-750
400-750
Noise at 1M
dB(A)
38-50
39-51
42-53
43-54
43-55
Noise at 1M in silence mode
dB(A)
39
41
43
44
44
Refrigerant gas
R32
R32
R32
R32
R32
PVC Water connection
mm
40
40
40
40
40
Water flow volume
L/min
40
50
60
90
100
Water pressure drop (max)
kPa
2
3
4
5
5
Net dimensions L/W/H
mm
1004/418/605
1004/418/605
1004/418/605
1046/453/765
1161/490/862
Net weight
kg
42
45
46
66
70
*Heating: 27°C Air / Water 26°C / Humid 80%*
The data above is based on the Evo heat pump only, it does not include auxiliary devices. Product specification information provided above is
correct at the date of printing, this data may change without notice. Please speak with an EvoHeat Specialist for the most current product
specifications.

[email protected]om.au
1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 3
2. Dimensions
Fusion-i 7, 9 & 12
Fusion-i
A (L)
B (W)
C (H)
D
E
F
7, 9 & 12
1004
418
605
535
350
98
Fusion-i 16
Fusion-i
A (L)
B (W)
C (H)
D
E
F
16
1046
453
764.5
615
350
101
Fusion-i 19
Fusion-i
A (L)
B (W)
C (H)
D
E
F
19
1161
490
861.5
790
465
96.5
Unit: mm

[email protected]om.au
1300 859 933
www.evoheat.com.au
Fusion-i Series Manual
Page 4
3. Quick Start Guide
IMPORTANT THINGS TO NOTE
•Ensure you meet the minimum clearances and recommended installation locations as outlined in the manual.
•All heat pump accessories are contained in a plastic bag inside the packaging of your heat pump unit.
PRE-INSTALLATION
1. Position the heater on a level pad in the desired location on the pool water return line (as shown in the
example image below).
2. Install the supplied antivibration rubber pads under the feet of the unit.
3. Install the supplied condensation barb to the underside of the unit and direct the condensation to an
appropriate drainage point.
PLUMBING INSTALLATION
NOTE: Evo heat pumps standard plumbing fitting size can accept 40mm NB PVC pipe for connection to the pool or spa filtration
plumbing.
1. Attach the supplied barrel unions to the cold inlet and hot outlet (hand tighten).
2. 
3. Install a 3-way valve at the cold-
4. Make the plumbing connections and brace pipework where necessary.
 


  

