Exadigm NX Seris Parts list manual

©2012 ExaDigm Inc. QNG_NX22_1112
NX SERIES
QUICK NAVIGATION GUIDE
Press power key again to
power off!!
Other keys to cancel.
POWER
To turn on press the power key until beep is heard.
To turn off press the power key until below message displays.
Press power again to continue.
STATUS BAR
CDMA Signal Date & Time Power Adapter
Ethernet Date & Time Battery
WiFi Date & Time Battery
Half full battery Low battery
MENU ICONS
Screen 1
Screen 2
TOUCH SCREEN
Drag to toggle to next screen.
Select the desired icon.
Press and release to select the desired sub-menu.
QWERTY Keyboard
When prompted for alpha responses the lowercase letter
keyboard will display. For numeric responses the keyboard will
display numbers and symbols.
The stylus can be used to input the information and respond to [ENTER]
and [CANCEL] commands.
PHYSICAL KEYPAD
Press the red key to cancel the current
operation or return to the previous
menu.
Press the yellow key to clear an action
or backspace clearing each character.
Press the green key to signify to the
terminal that the task is complete, or
press to enable a function or perform
an action based on inputted data.
Press the number key of the
corresponding letter and then press
alpha until the desired letter is
displayed.
Press the feed key to advance the
receipt.
Press the up arrow to return to the
previous screen or move up in the sub-
menu.
Press the down arrow to move to the
next screen or move down the sub-
menu.
SUB-MENU: Pressing the physical number key will shortcut to the function.

©2012 ExaDigm Inc. QNG_NX22_1112
NX SERIES
QUICK NAVIGATION GUIDE
QUICK SWIPE
Press the up arrow key at the first screen of App Manager
OR
Drag to the left at the first screen of App Manager
STYLUS
The stylus is stored in the lower right front side of the NX2200.
BARCODE SCANNER
Position the red laser in the middle of the barcode and ensure the
laser over-laps the edges.
24 X 7 TECHNICAL SUPPORT
866.392.8326 (option 4)
Email: [e-mail]
Technical Support will confirm the following:
You have a validactivation with your cellular carrier
Confirm there are at least 2 bars for sufficient reception
Terminal model and serial number
SOFTWARE LICENSING TERMS & CONDITIONS
Software supplied with each ExaDigm product remains the exclusive
property of ExaDigm. ExaDigm grants with each unit a perpetual license to
use this software with the express limitation that the software may not be
copied or used in any other product for any purpose. It may not be reverse
engineered, or used for any other purpose other than in and with the
computer hardware sold by ExaDigm.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates uses and can radiate radio frequency energy; and if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference to radio
communications, in which case the user will be required to correct the
interference at their own expense. Warning: Changes or modifications to
this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Information to the user:
If this equipment causes interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: In order to meet FCC emissions limits, this equipment must be
used only with cables that comply with IEEE 802.3. If necessary, the user
should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful: “How to Identify and
Resolve Radio-TV Interference Problems”. This booklet is available from:
U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-
000-00345-4