Lipman Nurit 3010 User manual

Reprogramming (Full Download)
PRESS MENU/ESC UNTIL.. CREDIT..SALE
space ACCOUNT
PRESS 4, MENU/ESC, VOID
ENTER SIMULTANEOUSLY 3010 Masc NOS
1. BACK TO PROG >
PRESS VOID
2. DOWNLOAD
PRESS ENTER
SWIPE MERCHANT
CARD ........................
KEY 0+6 DIGIT TID
PRESS ENTER DOWNLOAD MENU:
space 1. AUTO LOAD
PRESS VOID
2. COMM PRM
PRESS ENTER
space CONNECT (MODEM):
1. PHONE>18663132977
PRESS ENTER
ENTER PHONE NUM
space <phone number>
KEY 18663132977
PRESS ENTER CONNECT (MODEM):
1. PHONE>18663132977
PRESS VOID
CONNECT (MODEM):
2. EXCHANGE PREF
PRESS ENTER
EXCHANGE PREFIX:
KEY PABX
PRESS ENTER
-OR-
PRESS CLEAR TO DELETE
Lipman Nurit 3010
Use these procedures to reprogram the terminal via modem.
Download will take approx. 20 - 30 minutes.
NOTE: Dial Prefix does not go in front of phone number. It must be put in the 'Exchange Prefix'
field.
NOTE: A phone line must be connected in the back of the terminal in the port marked "LINE" for
terminal to download.
Download phone #: [phone]
** You will need to push the 4 buttons to enter the NOS menu on any application 4.71 or lower.
**Applications 4.80 or higher will require that you access the NOS screen through Menu/Esc,Menu
9.

CURRENT PABX CONNECT (MODEM):
2. EXCHANGE PREF
PRESS 4
CONNECT (MODEM):
4. BAUD <value>
PRESS ENTER TO 2400
CONNECT (MODEM):
4. BAUD 2400
PRESS MENU/ESC
DOWNLOAD MENU:
2. COMM PRM
PRESS VERIFY
DOWNLOAD MENU:
1. AUTO LOAD
PRESS ENTER
PROG RUN, QUIT?
ENTER - Y ESC - N
PRESS ENTER
CLEARING PRM MEMORY...
DIALING
<phone number>
LOADING PROGRAM,
PLEASE WAIT...
LOADING PRG 000%
PRM DOWNLOAD COMPLETED..
IDLE PROMPT
If it says Connect [COMM1] press [3,Enter,Enter,Menu/Esc,Enter]