ExSilent Qleaf Pro User manual

Contents of the package
1Qleaf Pro module
2Introduction set of soft tips
made of hypoallergenic material
(S open en closed version,
M and L closed version)
3Battery ejection tool
4Colored side indicator
5Carrying box
6Quick start guide,
User manual and
Data sheet
1
2
5
3
6
S
M
L
4
Placing the battery and switching the module on
First remove the sticker from the battery. Place the battery in the module with
the (+) sign (this is the at side of the battery where the sticker was) at the same
side as the (+) sign on the module. The module is set to program 1.
1Placing the module in the soft tip
Hold the soft tip with the pull cord pointed upwards. Place the module in the
soft tip with the arrow facing towards you.
2
Push the module gradually into the soft tip. Insert the module all the way into
the soft tip. The device is now ready for use.

Quick start guide
Switching programs with the AirTAP™ function
Switch programs with the AirTAP™ functionality by softly tapping the ear. It is
important that the ear is closed o with the ngers, so that the device properly
notes the dierence in air pressure. The number of beeps indicates which
program is in use.
EN V1.4 04/2015 15-145 © 2015 ExSilent. All rights reserved.
Placing the device in the ear
APlace the device in the ear with the‘pull cord’(long part of the soft tip) at
the side of the ‘tragus’. BMove you arm over your head. Grab the upper part of
your ear. Pull the ear up a little as this will straighten the ear canal, which makes
it easier to insert the device further. CWhile pulling the ear up, push the device
gently with an up and down movement as far in the ear as possible.
3
A B C
‘tragus’
‘pull cord’
‘tragus’
‘pull cord’
4