Exsys EX-1113HMS User manual

16-Port USB 3.2 Gen 1 Metal HUB with
15KV ESD Surge Protection
EX-1113HMS
16-Port USB 3.2 Gen 1 Metall HUB mit
15KV ESD Überspannungsschutz
Vers. 1.1 / 31.03.22
Manual
Anleitung

2
EX-1113HMS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
1. Beschreibung···································································································· 3
2. Lieferumfang····································································································· 3
3. Aufbau, Anschlüsse & Jumper Einstellungen·························································4-5
3.1 Aufbau························································································································ 4
3.2 Anschlüsse················································································································4-5
3.3 Jumper Einstellungen···································································································· 5
4. Hardware Installation·························································································· 6
5. Treiber Installation ····························································································· 7
6. Reinigung········································································································· 7
7. Technische Daten······························································································ 8
8. Technische Zeichnung························································································ 8
1. Description ······································································································· 9
2. Extent of Delivery······························································································· 9
3. Layout, Connections & Jumper Settings ··························································· 10-11
3.1 Layout ·······················································································································10
3.2 Connections ··········································································································10-11
3.2 Jumper Settings ··········································································································11
4. Hardware Installation·························································································12
5. Driver Installation······························································································13
6. Cleaning ·········································································································13
7. Technical Information ························································································14
8. Technical Drawing ····························································································14
Inhaltsverzeichnis
Index

3
EX-1113HMS Deutsch
Der EX-1113HMS ist ein USB 3.2 Gen 1 Metall HUB für bis zu sechzehn Endgeräte. Der Hub ist mit
16 Ports für Endgeräte und 1 Port für den Anschluss an den PC ausgestattet. Er unterstützt alle USB
Ports von 1.1 bis 3.2. Durch die Stromversorgung über den Terminal Block können an jedem USB
Port 900mA zur Verfügung gestellt werden. Der USB 3.2 Bus unterstützt optimal die Leistung des
schnellen Genesys Chipsatz. Der EX-1113HMS gewährleistet so eine sichere Datenübertragung und
exzellente Performance von bis zu 5Gbit/s. Er unterstützt den Self-Powered und USB-Bus-Powered
Modus. Zusätzlich ist der EX-1113HMS mit einem 15KV ESD Überspannungsschutz ausgestattet.
Der EX-1113HMS unterstützt die Norm IP30. Im Lieferumfang ist eine Wandmontagehalterung, sowie
ein DIN-Rail Kit für die Installation auf einer Tragschiene enthalten. Das DIN-Rail Kit wird mit zwei
Schrauben auf der Rückseite festgeschraubt.
Merkmale:
• Kompatibel zu USB 1.1, 2.0 & 3.2
• Bis zu 5Gbit/s
• Es werden alle Betriebssysteme unterstützt
• 15KV ESD Überspannungsschutz
• Zertifiziert für
1. Beschreibung
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
Bevor Sie den EX-1113HMS an Ihren PC anschließen, überprüfen Sie bitte zuerst den Inhalt der
Lieferung:
• EX-1113HMS
• USB 3.2 Gen 1 Kabel (EX-K1504)
• DIN-Rail Kit (EX-6096)
• Wandmontagehalterung
• Bedienungsanleitung
2. Lieferumfang

4
Deutsch EX-1113HMS
3.1 Aufbau
16x USB 3.2 Gen 1
Downstream A-Buchse
3. Aufbau, Anschlüsse & Jumper Einstellungen
Betriebs LED 7-24V T-Block für
optional erhältliches Netzteil
3.2 Anschlüsse
+7V bis +24V T-Block:
+7V - 24V GND (Ground)
ACHTUNG!!!
Schließen Sie niemals Strom an Ground an,
dadurch kann Ihre Hardware zerstört werden!!!
1x USB 3.2 Gen 1
Upstream B-Buchse
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.2 Gen 1 A-Buchse:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
Vorderseite:
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

5
EX-1113HMS Deutsch
3. Aufbau, Anschlüsse & Jumper Einstellungen
3.2 Anschlüsse
USB 3.2 Gen 1 B-Buchse:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
3.3 Jumper Einstellungen
Der EX-1113HMS wird mit der Einstellung USB-Bus-Power ausgeliefert. Sie haben aber die
Möglichkeit den EX-1113HMS auf der Datenleitung zum PC sprich die USB B-Buchse stromlos
zu machen. Dafür müssen Sie zu erst das Gehäuse mit den vier Schrauben auf den Seiten öff-
nen. Nun müssen Sie den Jumper JP1 von ENA (Enable) auf DIS (Disable) setzen. Siehe nach-
folgende Abbildung.
JP1 ENA
DIS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

6
Deutsch EX-1113HMS
4. Hardware Installation
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen PC‘s
gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau der EX-1113HMS geben. Bei
Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems.
1. Installieren Sie die EX-1113HMS an die Wand mit der im Lieferumfang enthaltenen Wandmo-
natge Halterung.
2. Oder mit dem mitgelieferten DIN-Rail Kit auf einer Tragschiene.
3. Verbinden Sie das mitgelieferte USB 3.2 Gen 1 Kabel mit dem USB 3.2 Gen 1 Upstream B-
Anschluss des Hubs.
4. Schließen Sie jetzt den Stromanschluss des optionalen Netzteils an den Terminal Block des
Hub‘s an und stecken Sie den Netzstecker des Netzteils in eine Steckdose.
5. Verbinden Sie nun das andere Ende (A-Anschluss) des mitgelieferten USB 3.2 Gen 1 Kabels mit
der A-Buchse an Ihrem PC.
Montage an Tragschiene
Löcher für
Wandmontage
DIN-Rail Clip
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

7
EX-1113HMS Deutsch
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
5. Treiber Installation
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX-1113HMS automa-
tisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“ folgenden Eintrag
sehen:
Ist dieser oder ein ähnlicher Eintrag vorhanden, ist der USB Hub richtig installiert.
6. Reinigung
Zur Reinigung des Gerätes verwenden Sie bitte ausschließlich ein trockenes nicht faserndes Tuch
und entfernen Sie die Verschmutzung mit leichtem Druck. Im Bereich der Anschlüsse bitte darauf
Achten, dass keine Fasern des Tuchs in der Buchse hinterlassen werden. Verwenden Sie bitte
zu Reinigung in keinem Fall ein feuchtes oder nasses Tuch!

8
Deutsch EX-1113HMS
8. Technische Zeichnung
7. Technische Daten
Chip-Set: Genesys
Datentransfer-Rate: 5Gbit/s
Anschlüsse: 16x USB 3.2 Gen 1 A-Buchse, 1x USB 3.2 Gen 1 B-Buchse,
1x Terminal Block 7-24V
Hardwaresystem: USB 1.1, 2.0 & 3.2
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: 0° bis 55° Celsius
Lagertemperatur: -20° bis 85° Celsius
Rel. Luftfeuchtigkeit: 5% bis 95%
Stromversorgung: +7 bis +24 Volt
Abmessung: 132,50 x 65,00 x 48,20 mm
Gewicht: 1000g
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

9
EX-1113HMS English
The EX-1113HMS is a USB 3.2 Gen 1 metal HUB for up to sixteen end devices. The hub is
equipped with 16 ports for end devices and 1 port for connection to PC. It supports all USB ports
from 1.1 to 3.2. Through the power supply via the Terminal Block, 900mA can be provided at each
USB port. The USB 3.2 bus optimally supports the performance of the fast Genesys chipset. The
EX-1113HMS thus ensures secure data transfer and excellent performance of up to 5Gbps. It
supports Self-Powered and USB-Bus-Powered mode. In addition, the EX-1113HMS is equipped
with 15KV ESD surge protection. The EX-1113HMS supports IP30 standard and comes a Wall
Mounting Bracket and a DIN-Rail kit for installation on a DIN-Rail. The DIN-Rail kit are screwed
tight with two screws on the backside.
Features:
• Compatible for USB 1.1, 2.0 & 3.2
• Up to 5Gbit/s
• All Operating Systems are supported
• 15KV ESD Surge Protection
• Certificate for
1. Description
Before you connect the EX-1113HMS to your PC, you should first check the contents of the deliv-
ery:
• EX-1113HMS
• USB 3.2 Gen 1 Cable (EX-K1504)
• DIN-Rail Kit (EX-6096)
• Wall Mounting Bracket
• Manual
2. Extent of Delivery
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

10
English EX-1113HMS
3.1 Layout
3. Layout, Connections & Jumper Settings
3.2 Connections
+7V to +24V T-Block:
+7V - 24V GND (Ground)
ATTENTION!!!
Never connect power to GND, it will destroy
your Hardware!!!
Attention!
Never plug in with force
or in wrong direction.
USB 3.2 Gen 1 A-Port:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
Front Side:
16x USB 3.2 Gen 1
Downstream A-Port
Power LED 7-24V T-Block for
optional Power Supply
1x USB 3.2 Gen 1
Upstream B-Port
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

11
EX-1113HMS English
3. Layout, Connections & Jumper Settings
3.2 Connections
USB 3.2 Gen 1 B-Port:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Attention!
Never plug in with force
or in wrong direction.
3.3 Jumper Settings
The EX-1113HMS will be delivered with the setting USB-Bus-Power. But you have the possibility
to cut the power at the data line. For this you open the case with the four screws on both sides.
Then you must set the jumper JP1 from ENA (Enable) to DIS (Disable). See the following picture.
JP1 ENA
DIS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

12
English EX-1113HMS
4. Hardware Installation
Because there are large differences between PC’s, we can give you only a general installation
guide for the EX-1113HMS. Please refer your computer’s reference manual whenever in doubt.
1. Install the EX-1113HMS to the wall with the included Wall Mounting Bracket.
2. Or with the included DIN-Rail Kit on a DIN-Rail.
2. Connect the USB 3.2 Gen 1 cable with the USB 3.2 Gen 1 Upstream B-Port at the EX-1113HMS.
3. Connect the optional power supply to the Terminal Block at the Hub.
4. Now connect the other end from the USB 3.2 Gen 1 cable (A-Plug) to the USB A-Port at your
PC.
Installation to DIN-Rail
Holes for
Wall Installation
DIN-Rail Clip
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved

13
EX-1113HMS English
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
5. Driver Installation
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install the driv-
ers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „USB-Controller“ the following new entry:
If you see this or a similar information the device is installed correctly.
6. Cleaning
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In the
area of the connectors please make sure that no fibres from the cloth remain in the connectors.
Attention! Never use a moist or wet cloth for cleaning!

14
English EX-1113HMS
© Copyright 2022 by EXSYS Vertriebs GmbH. All Rights Reserved
Chip-Set: Genesys
Data Transfer Rate: 5Gbit/s
Connectors: 16x USB 3.2 Gen 1 A-Port, 1x USB 3.2 Gen 1 B-Port,
1x Terminal Block 7-24V
Hardware System: USB 1.1, 2.0 & 3.2
Operating System: All Operating Systems
Operating Temperature: 32° to 131°Fahrenheit
Storage Temperature: -40° to 185°Fahrenheit
Rel. Humidity: 5% to 95%
Power: +7 to +24 Volt
Size: 132,50 x 65,00 x 48,20 mm
Weight: 1000g
7. Technical Information
8. Technical Drawing