Exsys EX-1191HMVS-PD User manual

4 Port USB 3.2 Gen 1 Metal HUB
with USB PD-Chaging and
15KV ESD Surge Protection
EX-1191HMVS-PD
4 Port USB 3.2 Gen 1 Metall HUB
mit USB PD-Aufladung und
15KV ESD Überspannungsschutz
Vers. 1.0 / 09.11.21
Manual
Anleitung

2
EX-1191HMVS-PD
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
1. Beschreibung···································································································· 3
2. Lieferumfang····································································································· 3
3. Aufbau & Anschlüsse························································································4-5
3.1 Aufbau························································································································ 4
3.2 Anschlüsse················································································································4-5
4. Hardware Installation·························································································· 6
5. Treiber Installation ····························································································· 6
6. Reinigung········································································································· 6
7. Technische Daten······························································································ 7
8. Technische Zeichnung························································································ 7
1. Description ······································································································· 8
2. Extent of Delivery······························································································· 8
3. Layout & Connections····················································································· 9-10
3.1 Layout ························································································································ 9
3.2 Connections ············································································································9-10
4. Hardware Installation·························································································11
5. Driver Installation······························································································11
6. Cleaning ·········································································································11
7. Technical Information ························································································12
8. Technical Drawing ····························································································12
Inhaltsverzeichnis
Index

3
EX-1191HMVS-PD Deutsch
Der EX-1191HMVS-PD ist ein USB 3.2 (Gen1) Metall HUB für bis zu 4 Endgeräte. Der Hub ist mit 4
Ports für Endgeräte und 1 Port für den Anschluss an den PC ausgestattet. Er unterstützt alle USB
Anschlüsse von 1.1 bis 3.2. Jeder Anschluss an der EX-1191HMVS-PD ist zusätzlich verschraubbar.
Durch die Stromversorgung über den DC Anschluss oder des Terminal Block, ist es möglich den
Host-PC über den USB-C Upstream Port und ein Endgerät über den USB-C Downstream Port gleich-
zeitig zu laden. Die USB-A Ports stellen Ihnen parallel bis zu 2A zur Verfügung. Dies ermöglicht Ihnen
ein problemloses aufladen von iPhone, iPad, Smartphone und Tablet. Der USB 3.2 Bus unterstützt
optimal die Leistung des schnellen Genesys Chipsatz. Der EX-1191HMVS-PD gewährleistet so eine
sichere Datenübertragung und exzellente Performance von bis zu 5Gbit/s. Er unterstützt den Self
Powered und Bus Powered Modus. Zusätzlich ist der EX-1191HMVS-PD mit einem 15KV ESD
Überspannungsschutz ausgestattet.
Merkmale:
• Kompatibel zu USB 1.1, 2.0, 3.0, 3.1 & 3.2
• Bis zu 5Gbit/s
• Es werden alle Betriebssysteme unterstützt
• Alle Anschlüsse sind verschraubbar
• 15KV ESD Überspannungsschutz
• PD Stromquelle Unterstützung: 20V/5A, 14,5V/2A, 12V/3A und 5V/3A
• Zertifiziert für
1. Beschreibung
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
Bevor Sie den EX-1191HMVS-PD an Ihren PC anschließen, überprüfen Sie bitte zuerst den Inhalt
der Lieferung:
• EX-1191HMVS-PD
• Netzteil (20V/3,25A)
• USB 3.2 Gen 1 Kabel (verschraubbar) (EX-K1591V)
• Bedienungsanleitung
2. Lieferumfang

4
Deutsch EX-1191HMVS-PD
3.1 Aufbau
3x USB 3.2 Gen 1
Downstream A-Buchse
3. Aufbau & Anschlüsse
Betriebs LED
3.2 Anschlüsse
+12V - 24V T-Block:
+12V - 24V GND (Ground)
ACHTUNG!!!
Schließen Sie niemals Strom an Ground an,
dadurch kann Ihre Hardware zerstört werden!!!
1x USB 3.2 Gen 1 Downstream
C-Buchse mit PD Aufladung
Vorderseite:
Rückseite:
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
12-24V T-Block
für optionales
externes Netzteil
12-24V Buchse für
im Lieferumfang
enthaltenem Netzteil
1x USB 3.2 Gen 1
Upstream C-Buchse
mit PD Aufladung

5
EX-1191HMVS-PD Deutsch
3. Aufbau & Anschlüsse
3.2 Anschlüsse
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.2 Gen 1 A-Buchse:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
12-24V DC Buchse:
ACHTUNG!!!
Nur zur Verwendung mit im Lieferumfang enthaltenem Netzteil!
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
USB 3.2 Gen 1 C-Buchse:
Hinweis!
Durch die Doppelbelegung der Pins, kann der USB-C Stecker beidseitig in die Buchse ge-
steckt werden.

6
Deutsch EX-1191HMVS-PD
4. Hardware Installation
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen PC‘s
gibt, können wir Ihnen nur eine generelle Anleitung zum Anschluss des EX-1191HMVS-PD geben.
Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems.
1. Verbinden Sie das mitgelieferte USB 3.2 Gen 1 Kabel mit dem USB 3.2 Gen 1 Upstream C-
Anschluss des Hubs.
2. Schließen Sie jetzt den Stromanschluss des mitgelieferten Netzteils an die DC Buchse des Hub‘s
an oder verbinden Sie das optionale Netzteil mit dem Terminal Block des Hub´s und stecken Sie
den Netzstecker des Netzteils in eine Steckdose.
3. Verbinden Sie nun das andere Ende (C-Anschluss) des mitgelieferten USB 3.2 Gen 1 Kabels mit
der USB C-Buchse an Ihrem PC.
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
5. Treiber Installation
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX-1191HMVS-PD
automatisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“ folgende Einträge
sehen:
Sind diese oder ähnliche Einträge vorhanden, ist der USB Hub richtig installiert.
6. Reinigung
Zur Reinigung des Gerätes verwenden Sie bitte ausschließlich ein trockenes nicht faserndes Tuch
und entfernen Sie die Verschmutzung mit leichtem Druck. Im Bereich der Anschlüsse bitte darauf
Achten, dass keine Fasern des Tuchs in der Buchse hinterlassen werden. Verwenden Sie bitte
zu Reinigung in keinem Fall ein feuchtes oder nasses Tuch!

7
EX-1191HMVS-PD Deutsch
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
8. Technische Zeichnung
7. Technische Daten
Chip-Set: Genesys
Datentransfer-Rate: 5Gbit/s
Anschlüsse: 3x USB 3.2 Gen 1 A-Buchse, 2x USB 3.2 Gen 1 C-Buchse,
1x Terminal Block 12-24V, 1x 12-24V DC Buchse
Hardwaresystem: USB 1.1, 2.0, 3.0, 3.1 & 3.2
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: 0° bis 55° Celsius
Lagertemperatur: -20° bis 85° Celsius
Rel. Luftfeuchtigkeit: 5% bis 95%
Stromversorgung: +12 bis +24 Volt
Abmessung: 178,60 x 59,20 x 23,20 mm
Gewicht: 880g

8
English EX-1191HMVS-PD
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
The EX-1191HMVS-PD is a plug & play high-speed USB 3.2 Gen 1 metal hub for 4 USB devices.
The EX-1191HMVS-PD provides 4 ports for USB devices and 1 uplink port for PC. It supports all
USB connections from 1.1 to 3.2. All ports can fix with screw lock. Via a external power supply it is
possible to load the host PC via the USB-C upstream port and a device via the USB-C
downstream port. The USB-A ports provide up to 2A. This allows you charging an iPhone, iPad,
Smartphone and Tablet. The EX-1191HMVS-PD design fully utilize the Genesys chipset, which
represents the latest in SuperSpeed USB interface technology. It uses data transfer rates up to
5Gbit/s. It provides a secure and very high data transfer on each single port. The EX-1191HMVS-
PD support the Self Powered and Bus Powered mode. In addition the EX-1191HMVS-PD is
equipped with an 15KV ESD surge protection.
Features:
• Compatible for USB 1.1, 2.0, 3.0, 3.1 & 3.2
• Up to 5Gbit/s
• All Operating Systems are supported
• All ports are Screw Lock
• 15KV ESD Surge Protection
• PD support Power Source: 20V/5A, 14,5V/2A, 12V/3A and 5V/3A
• Certificate for
1. Description
Before you connect the EX-1191HMVS-PD to your PC, you should first check the contents of the
delivery:
• EX-1191HMVS-PD
• Power Supply (20V/3,25A)
• USB 3.2 Gen 1 Cable (screw lock) (EX-K1591V)
• Manual
2. Extent of Delivery

9
EX-1191HMVS-PD English
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
3.1 Layout
3x USB 3.2 Gen 1
Downstream A-Port
3. Layout & Connections
Power LED
3.2 Connections
+12V - 24V T-Block:
+12V - 24V GND (Ground)
ATTENTION!!!
Never connect power to GND, it will destroy
your Hardware!!!
1x USB 3.2 Gen 1 Downstream
C-Buchsemit PD Aufladung
Front Side:
Back Side:
12-24V T-Block for
optional external
Power Supply
12-24V Connector
for included external
Power Supply
1x USB 3.2 Gen 1
Upstream C-Port
with PD Charging

10
English EX-1191HMVS-PD
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
Attention!
Never plug in with force
or in wrong direction.
3. Layout & Connections
3.2 Connections
USB 3.2 Gen 1 A-Port:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
12-24V DC Connector:
ATTENTION!!!
Use only with Power Supply which is included in delivery!
USB 3.2 Gen 1 C-Port:
Note!
By dual assignment of the pins, the USB-C plug can be plugged into the port on both sides.

11
EX-1191HMVS-PD English
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
5. Driver Installation
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install the driv-
ers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ports (COM & LPT)“ & „USB-Controller“ the
following new entry's:
If you see this or a similar information the device is installed correctly.
4. Hardware Installation
Because there are large differences between PC’s, we can give you only a general installation
guide. Please refer your computer’s reference manual whenever in doubt.
1. Connect the USB 3.2 Gen 1 cable to the USB C-Port at the Hub.
2. Connect the included power supply to the DC connector at the hub or connect the optional
power supply into the terminal block at the Hub.
3. Now connect the other end from the USB 3.2 Gen 1 cable (C-Plug) to the USB C-Port at your
PC.
6. Cleaning
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In the
area of the connectors please make sure that no fibres from the cloth remain in the connectors.
Attention! Never use a moist or wet cloth for cleaning!

12
English EX-1191HMVS-PD
© Copyright 2021 by EXSYS Vertriebs GmbH. All Rights Reserved
Chip-Set: Genesys
Data Transfer Rate: 5Gbit/s
Connectors: 3x USB 3.2 Gen 1 A-Port, 2x USB 3.2 Gen 1 C-Port,
1x Terminal Block 12-24V, 1x 12-24V DC Connector
Hardware System: USB 1.1, 2.0, 3.0, 3.1 & 3.2
Operating System: All Operating Systems
Operating Temperature: 32°F to 131°Fahrenheit
Storage Temperature: -40°F to 185°Fahrenheit
Rel. Humidity: 5% to 95%
Power: +12 to +24 Volt
Size: 178,60 x 59,20 x 23,20 mm
Weight: 880g
7. Technical Information
8. Technical Drawing