Exsys EX-1180HMS User manual

Anleitung
Vers. 1.0 / 20.09.18
Manual
Smallest 4 Port USB 3.1 (Gen1) Metal HUB
wit 15KV ESD Surge Protection
EX-1180HMS
Kleinster 4 Port USB 3.1 (Gen1) Metall HUB
mit 15KV ESD Überspannungssc utz

2
Deutsch EX-1180HMS
1. Besc reibung······················································································ 3
2. Lieferumfang ······················································································ 3
3. Aufbau, Ansc lüsse & Jumper Einstellungen ···········································4-5
3.1 Aufbau······································································································ 4
3.2 Ansc lüsse······························································································4-5
3.3 Jumper Einstellungen ·················································································· 5
4. Hardware Installation············································································ 6
5. Treiber Installation ··············································································· 7
6. Reinigung ·························································································· 7
7. Tec nisc e Daten················································································ 8
8. Tec nisc e Zeic nung·········································································· 8
1. Description ························································································· 9
2. Extent of Delivery ················································································ 9
3. Layout, Connections & Jumper Settings ············································· 10-11
3.1 Layout ·····································································································10
3.2 Connections ························································································ 10-11
3.3 Jumper Settings ························································································11
4. Hardware Installation···········································································12
5. Driver Installation················································································13
6. Cleaning ···························································································13
7. Tec nical Information ··········································································14
8. Tec nical Drawing ··············································································14
Inhaltsverzeichnis
Index
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

3
EX-1180HMS Deutsch
Der EX-1180HMS ist der kleinste USB 3.1 (Gen1) Metall HUB für bis zu 4 Endgeräte. Der
Hub ist mit 4 Ports für Endgeräte und 1 Port für den Ansc luss an den PC ausgestattet.
Er unterstützt alle USB Ansc lüsse von 1.1 bis 3.1. Durc die Stromversorgung über den
5V Terminal Block werden an jedem Port die vollen 900mA zur Verfügung gestellt. Mit der
im Lieferumfang ent altenen EX-K1110 ist es möglic an den EX-1180HMS ein 5V Ste-
ckernetzteil anzusc ließen. Der USB 3.1 Bus unterstützt optimal die Leistung des sc nel-
len Genesys C ipsatz. Der EX-1180HMS gewä rleistet so eine sic ere Datenübertragung
und exzellente Performance von bis zu 5Gbit/s. Er unterstützt den Self Powered und Bus
Powered Modus. Zusätzlic ist der EX-1180HMS mit einem 15KV ESD Überspannungs-
sc utz ausgestattet. Der EX-1180HMS kann problemlos mit der im Lieferumfang ent al-
tenen Wandmontage Halterung an die Wand installiert werden.
Merkmale:
• Kompatibel zu USB 1.1, 2.0, 3.0 & 3.1
• Bis zu 5Gbit/s
• Es werden alle Betriebssysteme unterstützt
• 15KV ESD Überspannungssc utz
• Zerti iziert ür
Bevor Sie den EX-1180HMS an I ren PC ansc ließen, überprüfen Sie bitte zuerst den
In alt der Lieferung:
• EX-1180HMS
• EX-K1110
• USB 3.1 (Gen1) Kabel
• Wandmontage Halterung
• Anleitung
1. Beschreibung
2. Lie erum ang
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

4
Deutsch EX-1180HMS
3.1 Au bau
3. Au bau, Anschlüsse & Jumper Einstellungen
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
1x USB 3.1 (Gen1)
Upstream B-Buc se
3.2 Anschlüsse
4x USB 3.1 (Gen1)
Downstream A-Buc se
Betriebs LED
5V T-Block für optionales
externes Netzteil oder zum
Ansc luss der EX-K1110
Vorderseite:
Rückseite:
+5V T-Block:
+5V GND (Ground)
ACHTUNG!!!
Schließen Sie niemals Strom an Ground an,
dadurch kann Ihre Hardware zerstört werden!!!

5
EX-1180HMS Deutsch
3. Au bau, Anschlüsse & Jumper Einstellungen
3.2 Anschlüsse
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
USB 3.1 (Gen1) B-Buchse:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.1 (Gen1) A-Buchse:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
3.3 Jumper Einstellungen
Die EX-1180HMS wird mit der Einstellung Self-Power ausgeliefert. Sie aben aber die
Möglic keit die EX-1180HMS mit Bus-Power zu versorgen. Dafür müssen Sie zu erst
das Ge äuse mit den zwei Sc rauben auf den Seiten öffnen. Nun müssen Sie den
Jumper JP1 von DIS (Disable) auf ENA (Enable) setzen. Sie e nac folgende Abbil-
dung.
JP1
DIS ENA

6
Deutsch EX-1180HMS
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
4. Hardware Installation
Beac ten Sie bitte die folgenden Installations inweise. Da es große Untersc iede zwi-
sc en PC‘s gibt, können wir I nen nur eine generelle Anleitung zum Einbau der EX-
1180HMS geben. Bei Unklar eiten alten Sie sic bitte an die Bedienungsanleitung
I res Computersystems.
1. Installieren Sie die EX-1180HMS an die Wand oder mit dem mitgelieferten DIN-Rail
Kit auf einer Tragsc iene.
2. Verbinden Sie das mitgelieferte USB 3.1(Gen1) Kabel mit dem USB 3.0/3.1(Gen1)
Upstream B-Ansc luss des Hubs.
3. Sc ließen Sie jetzt den Stromansc luss des optionalen Netzteils an den Terminal
Block des Hubs an und stecken Sie den Netzstecker des Netzteils in eine Steckdose.
4. Verbinden Sie nun das andere Ende (A-Ansc luss) des mitgelieferten USB 3.0/3.1
(Gen1) Kabels mit der USB A-Buc se an I rem PC.
Löc er für
Wandmontage
Montage an
Tragsc iene

7
EX-1180HMS Deutsch
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
6. Reinigung
5. Treiber Installation
Alle Betriebssysteme
Nac Absc luss der Hardwareinstallation erkennt das Betriebssystem den EX-
1180HMS automatisc und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“ folgen-
de Einträge se en:
Sind diese oder ä nlic e Einträge vor anden, ist der USB Hub ric tig installiert.
Zur Reinigung des Gerätes verwenden Sie bitte aussc ließlic ein trockenes nic t fa-
serndes Tuc und entfernen Sie die Versc mutzung mit leic tem Druck. Im Bereic der
Ansc lüsse bitte darauf Ac ten, dass keine Fasern des Tuc s in der Buc se interlas-
sen werden. Verwenden Sie bitte zu Reinigung in keinem Fall ein euchtes oder
nasses Tuch!

8
Deutsch EX-1180HMS
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
8. Technische Zeichnung
7. Technische Daten
Chip-Set: Genesys
Datentrans er-Rate: 5Gbit/s
Anschlüsse: 4x USB 3.1 (Gen1) A-Buc se, 1x USB 3.1 (Gen1)
B-Buc se, 1x 5V Terminal Block
Hardwaresystem: USB 1.1, 2.0, 3.0 & 3.1
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: 0° bis 55° Celsius
Lagertemperatur: -20° bis 85° Celsius
Rel. Lu t euchtigkeit: 5% bis 95%
Stromversorgung: +5 Volt
Abmessung: 80,00 x 46,00 x 25,00 mm
Gewicht: 300g

9
EX-1180HMS English
T e EX-1180HMS is t e smallest plug & play ig -speed USB 3.1 (Gen1) metal ub for
4 USB devices. T e EX-1180HMS provides 4 ports for USB devices and 1 uplink port
for PC. It supports all USB connections from 1.1 to 3.1. Via a external power supply it is
possible to provide a maximum of 900mA on eac USB port. Wit t e included EX-
K1110 it is possible to connect a 5V power adapter to t e EX-1180HMS. T e EX-
1180HMS design fully utilize t e Genesys c ipset, w ic represents t e latest in Super-
Speed USB interface tec nology. It uses data transfer rates up to 5Gbit/s. It provides a
secure and very ig data transfer on eac single port. T e EX-1180HMS support t e
Self Powered and Bus Powered mode. In addition t e EX-1180HMS is equipped wit
an 15KV ESD surge protection. T e EX-1180HMS can be easily installed on t e wall
wit t e included Wall Mounting Bracket.
Features:
• Compatible for USB 1.1, 2.0, 3.0 & 3.1
• Up to 5Gbit/s
• All Operating Systems are supported
• 15KV ESD Surge Protection
• Certi icate or
Before you connect t e EX-1180HMS to your PC, you s ould first c eck t e contents of
t e delivery:
• EX-1180HMS
• EX-K1110
• USB 3.1 (Gen1) Cable
• Wall Mounting Bracket
• Manual
1. Description
2. Extent o Delivery
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved

10
English EX-1180HMS
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
3. Layout, Connections & Jumper Settings
3.1 Layout
1x USB 3.1 (Gen1)
Upstream B-Port
3.2 Connections
4x USB 3.1 (Gen1)
Downstream A-Port
Power LED
5V T-Block for optional
external Power Supply or to
connect t e EX-K1110
Front:
Back:
+5V T-Block:
+5V GND (Ground)
ATTENTION!!!
Never connect power to GND, it will destroy
your Hardware!!!

11
EX-1180HMS English
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
3. Layout, Connections & Jumper Settings
3.2 Connections
USB 3.1 (Gen1) B-Port:
D-
GND
StdB_SSTX -
StdB_SSTX +
GND_DRAIN
StdB_SSTX+
StdB_SSTX -
D+
VBus
Attention!
Never plug in with orce
or in wrong direction.
Attention!
Never plug in with orce
or in wrong direction.
USB 3.1 (Gen1) A-Port:
StdB_SSTX -
StdB_SSTX+
GND_DRAIN
VCC
StdB_SSTX +
StdB_SSTX -
D+D- GND
3.3 Jumper Settings
T e EX-1180HMS comes wit t e setting Self-Power. You also ave t e possibility
t e EX-1180HMS to supply Bus-Power. For t is you open t e case wit t e two
screws on bot sides. T en you must set t e jumper JP1 from DIS (Disable) to ENA
(Enable). See t e following picture.
JP1
DIS ENA

12
English EX-1180HMS
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
4. Hardware Installation
Because t ere are large differences between PC’s, we can give you only a general in-
stallation guide for t e EX-1180HMS. Please refer your computer’s reference manual
w enever in doubt.
1. Install t e EX-1180HMS to t e wall or to a DIN-Rail if required.
2. Connect t e USB 3.1(Gen1) cable wit t e USB 3.0/3.1(Gen1) Upstream B-Port at t e
EX-1180HMS.
3. Connect t e optional power supply to t e Terminal Block at t e Hub.
4. Now connect t e ot er end from t e USB 3.1(Gen1) cable (A-Plug) to t e USB
A-Port at your PC.
Holes for
Wall Installation
Installation to
DIN-Rail

13
EX-1180HMS English
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
6. Cleaning
5. Driver Installation
All Operating Systems
After t e ardware installation t e OS will recognize t e device automatically and install
t e drivers.
CHECK INSTALLED DRIVER
Open t e >Device manager<. Now you s ould see at „USB-Controller“ t e following
new entry's:
If you see t is or a similar information t e device is installed correctly.
For cleaning please use only a dry fluff less clot and remove t e dirt wit gently pres-
sure. In t e area of t e connectors please make sure t at no fibres from t e clot re-
main in t e connectors. Attention! Never use a moist or wet cloth or cleaning!

14
English EX-1180HMS
© Copyrig t 2018 by EXSYS Vertriebs GmbH. All Rig ts Reserved
Chip-Set: Genesys
Data Trans er Rate: 5Gbit/s
Connectors: 4x USB 3.1 (Gen1) A-Port, 1x USB 3.1 (Gen1) B-Port,
1x 5V Terminal Block
Hardware System: USB 1.1, 2.0, 3.0 & 3.1
Operating System: All Operating Systems
Operating Temperature: 32°F to 131°Fa ren eit
Storage Temperature: -40°F to 185°Fa ren eit
Rel. Humidity: 5% to 95%
Power: +5 Volt
Size: 80,00 x 46,00 x 25,00 mm
Weight: 300g
7. Technical In ormation
8. Technical Drawing