Extreme Networks ExtremeWare Command Operating manual

Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, California 95051
[phone]
http://www.extremenetworks.com
ExtremeWare Software
Command Reference Guide
Software Version 7.3.0
Published: March, 2005
Part number: 100160-00 Rev. 04

2
Alpine, Altitude, BlackDiamond, EPICenter, Ethernet Everywhere, Extreme Ethernet Everywhere, Extreme Networks,
Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeWorks, GlobalPx Content Director, the Go Purple Extreme
Solution Partners Logo, ServiceWatch, Summit, the Summit7i Logo, and the Color Purple, among others, are trademarks
or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and other countries. Other
names and marks may be the property of their respective owners.
© 2004 Extreme Networks, Inc. All Rights Reserved.
Specifications are subject to change without notice.
Adobe, Acrobat, and Reader are registered trademarks of Adobe Systems Incorporated. NetWare and Novell are
registered trademarks of Novell, Inc. Merit is a registered trademark of Merit Network, Inc. Solaris is a trademark of
Sun Microsystems, Inc. F5, BIG/ip, and 3DNS are registered trademarks of F5 Networks, Inc. see/IT is a trademark of
F5 Networks, Inc.
“Data Fellows”, the triangle symbol, and Data Fellows product names and symbols/logos are
trademarks of Data Fellows.
F-Secure SSH is a registered trademark of Data Fellows.
sFlow® is a registered trademark of InMon Corporation.
All other registered trademarks, trademarks and service marks are property of their respective owners.
Authors: Hugh Bussell, Julie Laccabue, Megan Mahar, Richard Small
Production: Hugh Bussell

ExtremeWare Software 7.3.0 Command Reference Guide 3
Contents
Preface
Chapter 1 Command Reference Overview
Chapter 2 Commands for Accessing the Switch
clear session 66
configure account 67
configure banner 69
configure banner netlogin 70
configure dns-client add 71
configure dns-client add domain-suffix 72
configure dns-client add name-server 73
configure dns-client default-domain 74
configure dns-client delete 75
configure dns-client delete domain-suffix 76
configure dns-client delete name-server 77
configure idletimeouts 78
configure time 79
configure timezone 80
create account 84
delete account 86
disable clipaging 88
disable idletimeouts 89
enable clipaging 90
enable idletimeouts 91

4ExtremeWare Software 7.3.0 Command Reference Guide
Contents
enable license 92
history 93
reboot 94
show accounts pppuser 96
show banner 98
show dns-client 99
show switch 100
traceroute 103
Chapter 3 Commands for Managing the Switch
configure snmp access-profile readonly 107
configure snmp access-profile readwrite 109
configure snmp add community 111
configure snmp add trapreceiver 113
configure snmp community 117
configure snmp delete community 119
configure snmp delete trapreceiver 121
configure snmp sysContact 122
configure snmp sysLocation 123
configure snmp sysName 124
configure snmpv3 add access 125
configure snmpv3 add community 127
configure snmpv3 add filter 128
configure snmpv3 add filter-profile 129
configure snmpv3 add group user 130
configure snmpv3 add mib-view 132
configure snmpv3 add notify 134
configure snmpv3 add target-addr 135
configure snmpv3 add target-params 137
configure snmpv3 add user 139
configure snmpv3 add user clone-from 141
configure snmpv3 delete access 142
configure snmpv3 delete community 144
configure snmpv3 delete filter 145

ExtremeWare Software 7.3.0 Command Reference Guide 5
Contents
configure snmpv3 delete filter-profile 146
configure snmpv3 delete group user 147
configure snmpv3 delete mib-view 149
configure snmpv3 delete notify 150
configure snmpv3 delete target-addr 151
configure snmpv3 delete target-params 152
configure snmpv3 delete user 153
configure snmpv3 engine-boots 154
configure snmpv3 engine-id 155
configure snmpv3 target-addr-ext 156
configure sntp-client server 158
configure sntp-client update-interval 159
configure web login-timeout 160
disable alt-queue-management 161
disable snmp access 162
disable snmp dot1dTpFdbTable 163
disable snmp traps 164
disable snmp traps exceed-committed-rate ports 165
disable snmp traps port-up-down 166
disable snmp traps mac-security 167
disable sntp-client 168
disable system-watchdog 169
disable telnet 170
disable web 171
enable alt-queue-management 172
enable dhcp ports vlan 174
enable snmp access 175
enable snmp dot1dTpFdbTable 177
enable snmp traps 178
enable snmp traps exceed-committed-rate ports 179
enable snmp traps port-up-down 181
enable snmp traps mac-security 182
enable sntp-client 183
enable system-watchdog 184

6ExtremeWare Software 7.3.0 Command Reference Guide
Contents
enable telnet 185
enable web 187
exit 188
logout 189
quit 190
show snmpv3 context 191
show snmpv3 engine-info 192
show management 193
show odometer 196
show session 198
show snmpv3 access 200
show snmpv3 counters 201
show snmpv3 filter 202
show snmpv3 filter-profile 203
show snmpv3 group 204
show snmpv3 mib-view 205
show snmpv3 notify 206
show snmpv3 target-addr 207
show snmpv3 target-addr-ext 208
show snmpv3 target-params 209
show snmpv3 user 210
show sntp-client 211
show vlan dhcp-address-allocation 213
show vlan dhcp-config 214
telnet 216
unconfigure management 218
Chapter 4 Commands for Configuring Slots and Ports on a Switch
clear slot 221
configure backplane-ls-policy 222
configure ip-mtu vlan 223
configure jumbo-frame size 225
configure mirroring add 227
configure mirroring delete 229

ExtremeWare Software 7.3.0 Command Reference Guide 7
Contents
configure msm-failover link-action 230
configure msm-failover slave-config 232
configure msm-failover timeout 233
configure port aggregate-bandwidth percent 234
configure ports 235
configure ports auto off 238
configure ports auto on 240
configure ports auto-polarity 242
configure ports display-string 243
configure port interpacket-gap 244
configure ports link-detection-level 245
configure ports redundant 246
configure ports vdsl 248
configure sharing address-based 249
configure slot 250
disable edp ports 253
disable flooding ports 255
disable jumbo-frame ports 256
disable lbdetect port 257
disable learning ports 258
disable mirroring 260
disable ports 261
disable sharing 262
disable slot 263
disable smartredundancy 264
enable edp ports 265
enable flooding ports 267
enable jumbo-frame ports 268
enable lbdetect port 269
enable learning ports 270
enable mirroring to port 271
enable ports 273
enable sharing grouping 274
enable slot 277

8ExtremeWare Software 7.3.0 Command Reference Guide
Contents
enable smartredundancy 278
restart ports 279
run msm-failover 280
show edp 281
show mirroring 283
show msm-failover 284
show ports collisions 286
show ports configuration 288
show ports info 290
show ports packet 294
show ports sharing 296
show ports utilization 298
show ports vlan info 301
show sharing address-based 303
show slot 304
unconfigure msm-failover 308
unconfigure port aggregate-bandwidth 309
unconfigure ports display string 310
unconfigure ports redundant 311
unconfigure slot 312
Chapter 5 VLAN Commands
configure dot1q ethertype 314
configure gvrp 315
configure mac-vlan add mac-address 317
configure mac-vlan delete 319
configure ports monitor vlan 320
configure protocol add 321
configure protocol delete 322
configure vlan add member-vlan 323
configure vlan add ports 324
configure vlan add ports loopback-vid 326
configure vlan add secondary-ip 327
configure vlan delete member-vlan 329

ExtremeWare Software 7.3.0 Command Reference Guide 9
Contents
configure vlan delete port 330
configure vlan delete secondary-ip 331
configure vlan ipaddress 332
configure vlan name 333
configure vlan protocol 334
configure vlan tag 335
create protocol 336
create vlan 337
delete protocol 339
delete vlan 340
disable gvrp 341
disable mac-vlan port 342
enable gvrp 343
enable mac-vlan mac-group port 344
show gvrp 345
show mac-vlan 346
show protocol 347
show vlan 348
unconfigure ports monitor vlan 351
unconfigure vlan ipaddress 352
Chapter 6 FDB Commands
clear fdb 354
configure fdb agingtime 356
configure fdb-scan failure-action 357
configure fdb-scan period 359
create fdbentry vlan blackhole 360
create fdbentry vlan dynamic 362
create fdbentry vlan ports 364
delete fdbentry 366
disable fdb-scan 367
enable fdb-scan 369
run fdb-check 371
show fdb 373

10 ExtremeWare Software 7.3.0 Command Reference Guide
Contents
unconfigure fdb-scan failure-action 376
unconfigure fdb-scan period 377
Chapter 7 QoS Commands
clear dlcs 381
configure diffserv examination code-point qosprofile ports 382
configure diffserv replacement priority 384
configure dot1p type 386
configure ports qosprofile 387
configure qosprofile 388
configure qostype priority 390
configure red drop-probability 392
configure vlan priority 393
configure vlan qosprofile 394
disable diffserv examination ports 395
disable diffserv replacement ports 396
disable dlcs 397
disable dot1p replacement ports 398
disable qosmonitor 399
disable red ports 400
enable diffserv examination ports 401
enable diffserv replacement ports 402
enable dlcs 403
enable dot1p replacement ports 404
enable qosmonitor 406
enable red ports 407
show dlcs 408
show dot1p 409
show ports qosmonitor 410
show qosprofile 412
show qostype priority 414
unconfigure diffserv examination ports 415
unconfigure diffserv replacement ports 416
unconfigure qostype priority 417